桁架结构拓扑优化设计的模拟退火算法

研究了平面桁架结构拓扑优化设计的模拟退火算法．构造了一个双重控制Ｍｅｔｒｏｐｏｌｉｓ准则处理应力约束,提出了一个基于力平衡的启发式准则,以实现优化过程中单元的自动增删．算例表明,该方法能够克服桁架结构拓扑优化中因存在非凸星形可行域而造成的拓扑优化求解困难．     

“S”形刃球头立铣刀的研究（Ⅰ）──数学模型

在分析球头立铣刀刃磨方法的基础上,建立了“Ｓ”形刃球头立铣刀前、后刀面以及切削刃的数学模型．模型的建立对“Ｓ”形刃球头立铣刀几何参数的分析及优化、切削机理的研究、刃磨参数的选择以及刃磨装置的设计都将具有理论意义;对加快“Ｓ”形刃球头立铣刀的国产化制造具有实用价值．     

Almost sure convergence of weighted sums of NA sequences

For double arrays of constants {a _ni, 1≤i≤k _n, n≥1} and NA r.v. 's {X _n, n≥1}, conditions for almost sure convergence of are given. Both casesk _n ↑ ∞ andk _n=∞ are treated. A Marcinkiewicz-type theorem for i. d. NA sequences is obtained as a special case. Supported by the National Natural Science Foundation of China Cheng Riyan: born in 1968, MS student     

关于极大极小定理的一点注记

本文证明了关于Von Neumann型极大极小原理的许多结果,可作为论文“不动点型极大极小定理的一点推广”的直接结论。     

An independent microbial flora of the epithelium and its role in the ecomicrobiology of the rumen

IT has been suggested that the bacterial flora of the rumen should be considered as three distinct, interacting populations-the bacteria of rumen fluid (the population which has been studied most extensively), the bacteria associated with food particles, and the bacteria adhering to the epithelial wall of the organ(1). Until now, studies of the 'epithelial' population have been restricted to examination of postmortem samples of wall tissue and its attached bacterial flora(2-5). A recently developed technique(6) for feeding young sheep for long periods solely by infusion of protein and other essential nutrients into the abomasum, and of volatile fatty acids and bicarbonate buffer into the rumen, has provided us with an opportunity to study in isolation the role of the bacterial population of the wall in the ecomicrobiology of the rumen in the living animal. Our studies show that this population can exist independently of the other two populations, that it is primarily responsible for urea digestion in the rumen and that it initiates breakdown of dead epithelial tissue. Furthermore, our results point to an inverse relationship between ammonia concentration and ureolytic activity in rumen fluid, which may account for the control which ammonia exerts over flux of urea across the rumen wall(7-9).     

固体酸Zr(SO4)2·4H2O催化制备生物柴油

采用新型固体酸Zr(SO₄)₂·4H₂O替代传统的液体酸、碱催化剂，催化大豆油与甲醇的酯交换反应，制备生物柴油。考察了醇油摩尔比，催化剂用量，反应时间等因素对转化率的影响。采用气相色谱跟踪反应进程中各组分含量分布。优化出该反应最适宜的操作条件为：醇-油摩尔比6∶1，催化剂用量占原料油质量的3%，反应时间6h，反应温度65℃.在此条件下生物柴油的收率可达96.6%。制得的生物柴油与中国0^#柴油(GB 252—1994优级品)的主要性能指标接近。     

捷联寻的制导弹药的新型卡尔曼滤波器设计

针对捷联制导系统的自身特点,设计出用于估计导弹和目标在弹体坐标系中相对运动状态的卡尔曼滤波器,使滤波与制导在同一个坐标系即弹体坐标系内进行,避免了信息在弹体坐标系和惯性坐标系之间的多次转换,从而减少了信息损失.仿真结果表明,该方法能够满足捷联制导系统的要求.     

电极结构对等离子体显示单元放电效率的影响

利用实验和数值模拟方法研究等离子体显示屏放电单元中的电极间隙、长度、壁障高度等不同参数对放电特性的影响.结果表明,放电效率随电极长度、间隙大小的增大而增大,壁障的存在也使效率略有增加并导致单元有效电容减小,但对放电电压影响很小.单元高度对放电效率影响不大,但可以降低同样间隙下的放电电压.合理选择电极结构可以在较低的维持电压下获得较高的放电效率.     

MEVVA源强流Ti离子注入纯铜表面层的结构与性能研究

采用金属蒸气真空弧(MEVVA)离子源技术对强流Ti离子束注入到纯铜表面的结构和性能进行了系统的研究.材料表面层的机械性能测试表明:强流Ti离子注入纯铜后材料表面的硬度和耐磨性均有提高,相对于纯铜基体,5×1017 cm-2注量注入可以使材料表面硬度提高2.3倍,使表面摩擦因数下降14%.注入层的X射线结构分析表明:金属离子注入后,在纯铜表面注入层中析出了合金相,合金相的析出是材料的表面硬度和耐磨性提高的主要因素.