带有小参数和不连续源项的反应--扩散问题的多过渡点格式

在许多应用领域常出现带有小参数和不连续源项的反应一扩散问题．这类问题在边界层和内部层附近都出现剧烈振荡现象，解析解根本无法求出．因此人们常采用关于摄动参数为一致收敛的数值方法．本介绍了多过渡点方法，此方法根据边界层和内部层的特点，选择合适的过渡点．在内部层和边界层附近加细了网格点。它很好地拟合了边界层和内部层的性质．证明了新的格式关于小参数一阶一致收敛．提高了Shishkin网格法(单过渡点法)的收敛阶．     

Construction of a genetic map with SRAP markers and localization of the gene responsible for the first-flower-node trait in cucumber (Cucumis sativus L.)

With an F2 population from the cross of two cucumber inbred lines, S06 and S52, sequence-related amplified polymorphism (SRAP) was used to construct a genetic linkage map in cucumber (Cucumis sativus L.). Sixty-four SRAP primer combinations generated 108 polymorphic bands in the F2 population analysis. The average of polymorphic bands produced by one primer pair was 1.5, and the maximum was 5. Using Mapmaker 3.0, a linkage map was constructed, which consisted of 77 SRAP markers distributed in nine linkage groups (LOD≥3.0) and spanned 1114.2 cM with an average interval of 14.5 cM between markers. The gene for the first-flower-node trait, termed ffn, was mapped to linkage group Ⅸ, flanked by DC1EM5 and ME7EM2A at 10.3 cM and 12.1 cM distance, respectively.     

连杆机构稳健性优化设计

将设计变量作为随机变量,建立了连杆机构稳健性优化设计的数学模型,并以一个四杆机构为例进行了说明,将传统的确定性优化设计的结果与稳健性优化设计的结果进行了对比.     

抗癌中药乌骨藤的研究进展

目的了解中药乌骨藤的研究进展.方法通过查阅文献资料,对中药乌骨藤的化学成分、药理作用、临床应用及质量控制的研究进展进行分析总结.结果展示了中药乌骨藤的研究进展情况.结论为乌骨藤的进一步研究和利用提供了有益的参考.     

基于3D-GM-BPM的平行定向耦合器模拟研究

提出了基于伽辽金法的三维光束传播法（3D－GM－BPM），可直接应用于三维波导光电子器件的光波传输模拟，并用它模拟分析了基于脊形光波导的平行定向耦合器遥光波传输特性。3D－GM－BPM最终归结为求角一阶常微分方程组，导出矩阵小，计算效率高。另外，平面映射边界条件使该方法无须引入人工边界条件，因而消除了非物理反射，有较高的计算精度。     

光泽精化学发光分析进展

本文对光泽精在1983年-2000年间的发展概况作了综述，内容包括概述、原理、应用等．     

高精度的正交频分复用频率同步新算法

提出了一种基于 80 2 .1 1 a的适合于室内环境的频率同步算法 .它们分两步实现 :1在快速傅里叶变换 ( FFT)前作频率跟踪 ,估计小数倍频率偏移 ,估计范围 |ε| <ΔF;2经初步频率校正后在 FFT作频率捕获 ,估计整数倍频率偏移 ,估计范围在 [- 32ΔF,31ΔF].该算法简单 ,能准确地估计频率偏移量 .同时 ,在保证算法精度的情况下 ,增加了频率捕获的范围 ,解决了传统频率同步算法中算法复杂度和频偏估计范围的矛盾     

基于UDP协议的语音传输系统设计及实现

文中讨论了基于UDP协议的语音传输系统的设计及实现。比较详细的阐述了语音信息的录制和播放、发送接收、压缩和解压缩以及语音传输过程的缓冲机制。由于采用了压缩技术，减小了语音信息对网络带宽的要求，故较好的实现了语音信息实时录制、传输和播放。     

16电子半夹心结构含硫碳硼烷钴配合物CptCoS2C2B10H10的合成以及结构表征

八羰基二钴Co2(CO)8与叔丁基取代的环戊二烯反应，可以得到半夹心结构的羰基钴化合物Cp^tCo(CO)2(2)(Cp^t=η^5-^tBuC5H4)，化合物(2)与元素碘进行反应可以被氧化成相应的钴的碘化产物Cp^tCo(CO)I2(3)，采用碳硼烷含硫锂化合物[(THF)3LiS2C2B10H10Li(THF)]2(1)与18电子半夹心结构羰基钴的碘化物Cp^tCo(CO)I2(3)反应得到16电子半夹心结构化合物Cp^tCoS2C2B10H10(4)，表征了化合物(2)，(3)和(4)，并解析了配合物(4)的X—衍射的单晶结构。     

Design Optimization of Charger Based on PSPICE Simulation

The design of a high-frequency switching mode charger (HFSMC) was optimized using a PSPICE simulation of the charging system including a valve regulated lead-acid (VRLA) battery pack and the HFSMC.A high-frequency battery charging circuit model was developed to describe the battery dynamics when charging with DC current having high-frequency ripples. An IGBT circuit model, a high-frequency pulsed transformer coupling model and a silicon fast recovery diode model were also developed. Simulations were compared to laboratory measurements to verify the battery and system models. Simulation of the working states of an Fe-based nanocrystalline magnetic core used in the transformer shows that the transformer design can be optimized by adjusting the core gap and by employing an RC network. Further simulations show that the components in the output unit of the charger main circuit can also be optimized. Simulations also show that the battery dynamics Including the inductance should be considered for design optimization of the HFSMC.