乙烷—丙烷混合裂解模型及产率预计

本文研究了乙烷和丙烷的混合裂解,并与乙烷、丙烷单独裂解进行了比较。解决了微分方程组的刚性问题,提出了混合裂解反应动力学模型。明确了三种选择性的概念,即;真实选择性、迭加选择性和总选择性,从而澄清了国际上对于选择性有正偏差和负偏差的不同观点。为乙烯生产提供了有效利用乙烷和丙烷的分析评价方法。     

具有部分自由液面水平管流的理论计算方法

本文对未充满液体具有部分自由液面的圆管内的流动提出一种理论计算方法.理论可以正确预报"脱体点"的位置、流量、自由液面曲线形状等重要物理量.文中还讨论了管直径D、长度L、流体密度ρ、粘度μ及液位高度等参数对流动的影响.文中以光学玻璃连续熔炼系统中起重要作用的联接管内的流动为例作了具体计算,并与实验结果作了比较,理论与实验结果吻合良好.本文给出的理论方法可推广于一般截面形状的具有部份自由液面的管流计算.     

Application of the Constrained Predicated Nets and Interval Logic to Production Systems

1 .INTRODUCTIONDuetotheireconomicsignificanceandclosenesstopersons,productionsystemsmustbemodeledbeforetheirimplementationanduse,thus,amethodwhichspecifies ,analyzesandsynthesizestheproductionsys tems—discreteeventsystems (DES)hasbeenestab lishedanddevelopedstepbystepinrecentyears.DESmethodspecifiestheplantbasedonitsdiscretecharacters,however,intherealworld ,therearefewplantsthatcanbemodeledbypurelydiscretemathe maticalmodelbecausetherearealwayssomecontinu ousparametersforstudyinnearlya…     

Aspirin-like drugs may block pain independently of prostaglandin synthesis inhibition

Summary Using flurbiprofen, a chiral anti-inflammatory and analgesic 2-arylpropionic acid derivative, the enantiomers of which are not converted to each other (less than 5%) in rats or man, we obtained evidence that prostaglandin synthesis inhibition is primarily mediating the anti-inflammatory activity but prostaglandin synthesis independent mechanisms contribute to the analgesic effects. Thus, the S-form inhibited prostaglandin synthesis, inflammation and nociception in rats. The R-form had much less effect on prostaglandin synthesis and did not affect inflammation. It did, however, block nociception in rats almost as potently as the S-form. S-flurbiprofen, in contrast to the R-form, was clearly ulcerogenic in the gastrointestinal mucosa. These results indicate additional molecular mechanisms of analgesia and suggest the use of R-arylpropionic acids as analgesics.     

广谱型C60修饰电极电位传感器的研究

吸附型Ｃ６０修饰玻碳电极可作为一种广谱响应的电位传感器，对十余种无机及有机季铵盐阳离子，其电位－浓度对数值呈一定的线性关系，该电极制备方便、响应速度快，稳定性好。本文还从电极表面Ｃ６０晶型结构出发，对电极的响应机理进行了初步探讨。     

激光开槽、埋槽电极硅太阳电池

报道一种新颖的激光开槽、埋槽电极硅太阳电池的结构、工艺流程及其研制结果。在ＡＭ１．５，２５℃，１００ｍＷ／ｃｍ２的条件下，以面积为４５ｃｍ３的３６片硅片研制的硅太阳电池的输出参数的平均值为ＪＳＣ＝３６．１ｍＡ／ｃｍ２，Ｖ∞＝６３３ｍＶ，Ｆ．Ｆ．＝０．７９８，η＝１８．２３％，最后分析了种高性能硅太阳电池的设计特点。     

钢液定氧测头响应时间和热平衡态

本文分别研究了ＺｒＯ２（ＭｇＯ）固体电解质管头壁厚，参比电极量对定氧测头响应时间的影响，得出了以ＺｒＯ２管头壁厚为０．６０－０．８０ｍｍ，Ｃｒ／Ｃｒ２Ｏ３参比电极加入量为４０－６０ｍｇ所组成的定氧测头响应速度最快，同时采用了“双偶法”对定氧测头在工作过程中的热平衡态进行了研究。结果表明：氧浓差电池中的传热是响应过程的控速步骤，氧电势曲线上峰值的产生是起源于电池中的热平衡态。