具有两个称量台面的动态轨道衡的软件

本文介绍了一种双台面微机动态轨道衡的新型软件。当油罐车通过秤台时,计算机能自动地以整车计量方式计算出车重,从而消除罐中液体晃动对计量精确度的影响。当固态货车通过秤台时,计算机自动地以转向架计量方式计算出车重。因为有两个秤台,每个转向架被计量两次,这样,称量精确度比单秤台高。     

几种桥环化合物Retro-Diels-Aleder反应的活化熵及A因子估算

用简化的过渡态理论(STST),按协同机制,对几种桥环化合物裂解反应的活化熵、A因子作了首次估算.并和实验结果作比较讨论了反应可能进行的机理:解释了反应的A因子递变现象.     

湿热预处理对餐厨垃圾高温干式厌氧消化的影响

为探索湿热预处理对餐厨垃圾高温干式厌氧消化的影响,在含固率为20％、发酵温度55℃的条件下进行厌氧发酵试验。采用L9（33）正交试验设计,研究湿热预处理的加水率、温度、时间对餐厨垃圾干式厌氧消化产沼气的影响。结果表明：湿热处理后餐厨垃圾的理化性质有明显变化,日产气量、累积产气量以及TS和VS的去除率明显升高。当湿热预处理条件为加水率50％、温度120℃、时间80 min时,SCOD值最高,为101050 mg／L,比未处理时提高了5．6倍。同样,该条件下日产气量出现的两个产气峰值最高,累积产气量也最高,为269．10 ml／gVS,与未处理相比累积产气量提高49．4％。各因素对餐厨垃圾厌氧发酵产气量影响的主次关系为：温度＞时间＞加水率,处理温度和处理时间对产气量有显著性影响,加水率对产气量影响较弱。     

基于纤维模型的钢混组合柱滞回性能模拟

采用纤维模型对一个钢管混凝土组合柱进行了极限承载力分析,计算并比较了各种轴压比下钢混组合柱的滞回性能,得到了抗震较为理想的轴压比.结果表明,纤维截面单元能用较小的计算代价获得与规范相近的计算结果.     

The effect of metal electron cloud on the luminescence characteristics of organic ligands: An experimental and theoretical investigation

The luminescence processes of metal complexes are complicated by intramolecular charge (energy) transfer from the metal to the ligand or from the ligand to the metal. The charge transfer strongly influences the excited state of the ligand and its luminescence characteristics. The luminescence characteristics of tris(8-hydroxyquinoline) aluminum (Alq3) and tris(8-hydroxyquinoline) gallium (Gaq3) are investigated to reveal the effect of the metal ion on the ligand. Emission from the complexes shows a signific...     

A high-performance narrowband high temperature superconducting filter

Recent development of a high-performance narrowband high-temperature superconducting (HTS) filter is presented. A 10-pole quasi-elliptic function response filter with two pairs of transmission zeros (for high selectivity), which has a center frequency of 2.185 GHz and a 3 dB bandwidth of 10 MHz (a fractional bandwidth of 0.45%), is introduced. The filter was fabricated on a 40 mm×16 mm×0.5 mm MgO wafer with double-sided YBCO films. The measured results show that the filter has 0.15 dB insertion loss at the ...     

谈现代城市轨道交通的设备管理分类及编码

结合资产密集型的城市轨道交通的行业特点,以设备的全寿命周期管理为线索,对为设备管理服务的几种设备分类方式与编码方式进行尝试性分析,并为信息化管理提供参考思路。     

Synthesis of Mg2B2O5 whiskers via coprecipitation and sintering process

Mg₂B₂O₅ whiskers with high aspect ratio were synthesized by coprecipitation and sintering process using MgCl₂·6H₂O, H₃BO₃, and NaOH as raw materials and KCl as a flux. Their formation process was investigated by thermogravimetry and differential scanning calorimetry (TG-DSC), X-ray diffraction (XRD), and scanning electron microcopy (SEM). It is found that the products synthesized at 832°C are monoclinic Mg₂B₂O₅ whiskers with a diameter of 200?C400 nm and a length of 50?C80 ??m. Transmission electron microscopy (TEM) and selected area electron diffraction (SAED) analyses show that the whiskers obtained at 832°C are single crystalline and grow along with the [010] direction. The growth mechanism of Mg₂B₂O₅ whiskers was also presented.     

慈善与中小学慈善教育——以温州为例

在现代文明的社会里,慈善作为社会美德和公民素质被广泛认同和崇尚.在“爱心温州·善行天下”成为品牌的背景下对温州青少年对慈善的认知水平和学校慈善教育的效果进行研究.发现学校的慈善教育在一定程度上滞后于社会的慈善发展.借鉴温州人新慈善模式中建设平台起点高、慈善体制和机制新以及慈善理念独特的特征,结合温州中小学慈善教育的现状,提出慈善教育社会化、慈善教育生活化、学生慈善习惯化的青少年慈善教育架构.     

Effect of TMGa flux on GaN films deposited on Ti coated on glass substrates at low temperature

Highly c-axis-oriented GaN films were deposited on Ti coated glass substrates using low temperature electron cyclotron resonance plasma enhanced metal organic chemical vapor deposition system(ECR-PEMOCVD)with trimethyl gallium(TMGa)as gallium source.The influence of TMGa flux on the properties of GaN films were systematically investigated by reflection high energy electron diffraction(RHEED),X-ray diffraction analysis(XRD),atomic force microscopy(AFM)and Raman scattering.The GaN film with small surface roughness and high c-axis preferred orientation was successfully achieved at the optimized TMGa flux of 1.0 sccm.The ohmic contact characteristic between GaN and Ti layer was clearly demonstrated by the near-linear current-voltage(I-V)curve.The GaN/Ti/glass structure has great potential to dramatically improve the scalability and reduce the cost of solid-state lighting light emitting diodes.