Kinetics and formation mechanisms of intragranular ferrite in V-N microalloyed 600 MPa high strength rebar steel

To systematically investigate the kinetics and formation mechanisms of intragranular ferrite (IGF), isothermal heat treatment in the temperature range of 450℃ to 600℃ with holding for 30 s to 300 s, analysis of the corresponding microstructures, and observation of the precipitated particles were conducted in V-N microalloyed 600 MPa high strength rebar steel. The potency of V(C,N) for IGF nucleation was also analyzed statistically. The results show that the dominant microstructure transforms from bainite (B) and acicular ferrite (AF) to grain boundary ferrite (GBF), intragranular polygonal ferrite (IPF), and pearlite (P) as the isothermal temperature increases from 450℃ to 600℃. When the holding time at 600℃ is extended from 30 s to 60 s, 120 s, and 300 s, the GBF content ranges from 6.0vol% to 6.5vol% and the IPF content increases from 0.5vol% to 2.8vol%, 13.1vol%, and 13.5vol%, respectively, because the ferrite transformation preferentially occurs at the grain boundaries and then occurs at the austenite grains. Notably, V(C,N) particles are the most effective nucleation site for the formation of IPF, accounting for 51% of the said formation.     

Effect of shot peening on hydrogen embrittlement of high strength steel

The effect of shot peening (SP) on hydrogen embrittlement of high strength steel was investigated by electrochemical hydrogen charging, slow strain rate tensile tests, and hydrogen permeation tests. Microstructure observation, microhardness, and X-ray diffraction residual stress studies were also conducted on the steel. The results show that the shot peening specimens exhibit a higher resistance to hydrogen embrittlement in comparison with the no shot peening (NSP) specimens under the same hydrogen-charging current density. In addition, SP treatment sharply decreases the apparent hydrogen diffusivity and increases the subsurface hydrogen concentration. These findings are attributed to the changes in microstructure and compressive residual stress in the surface layer by SP. Scanning electron microscope fractographs reveal that the fracture surface of the NSP specimen exhibits the intergranular and quasi-cleavage mixed fracture modes, whereas the SP specimen shows only the quasi-cleavage fractures under the same hydrogen charging conditions, implying that the SP treatment delays the onset of intergranular fracture.     

Effects of sphere size on the microstructure and mechanical properties of ductile iron–steel hollow sphere syntactic foams

The effects of sphere size on the microstructural and mechanical properties of ductile iron–steel hollow sphere (DI–SHS) syntactic foams were investigated in this study. The SHSs were manufactured by fluidized-bed coating via the Fe-based commercial powder–binder suspension onto expanded polystyrene spheres (EPSs). Afterwards, the DI–SHS syntactic foams were produced via a sand-mold casting process. The microstructures of specimens were investigated by optical microscopy, scanning electron microscopy (SEM), and energy- dispersive X-ray spectroscopy (EDS). The microscopic evaluations of specimens reveal distinct regions composed of the DI matrix, SHS shells, and compatible interface. As a result, the microstructures and graphite morphologies of the DI matrix depend on sphere size. When the sphere size decreases, the area fractions of cementite and graphite phases are observed to increase and decrease, respectively. Compression tests were subsequently conducted at ambient temperature on the DI–SHS syntactic foams. The results reveal that the compression behavior of the syntactic foams is enhanced with increasing sphere size. Furthermore, the compressed specimens demonstrate that microcracks start and grow from the interface region.     

Preparation of Al<Subscript>72</Subscript>Ni<Subscript>8</Subscript>Ti<Subscript>8</Subscript>Zr<Subscript>6</Subscript>Nb<Subscript>3</Subscript>Y<Subscript>3</Subscript> amorphous powders and bulk materials

Amorphous Al₇₂Ni₈Ti₈Zr₆Nb₃Y₃ powders were successfully fabricated by mechanical alloying. The microstructure, glass-forming ability, and crystallization behavior of amorphous Al₇₂Ni₈Ti₈Zr₆Nb₃Y₃ powders were investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), and differential scanning calorimetry (DSC). The isothermal crystallization kinetics was analyzed by the Johnson–Mehl–Avrami equation. In the results, the supercooled liquid region of the amorphous alloy is as high as 81 K, as determined by non-isothermal DSC curves. The activation energy for crystallization is as high as 312.6 kJ·mol?1 obtained by Kissinger and Ozawa analyses. The values of Avrami exponent (n) imply that the crystallization is dominated by interface-controlled three-dimensional growth in the early stage and the end stage and by diffusion-controlled two- or three-dimensional growth in the middle stage. In addition, the amorphous Al₇₂Ni₈Ti₈Zr₆Nb₃Y₃ powders were sintered under 2 GPa at temperatures of 673 K and 723 K. The results show that the Vickers hardness of the compacted powders is as high as Hv 1215.     

Microstructure evolution and thixoforming behavior of 7075 aluminum alloy in the semi-solid state prepared by RAP method

The effects of isothermal treatments on the microstructural evolution and coarsening rate of semi-solid 7075 aluminum alloy produced via the recrystallization and partial remelting (RAP) process were investigated. Samples of 7075 aluminum alloy were subjected to cold extrusion, and semi-solid treatment was carried out for 5–30 min at temperatures ranging from 580 to 605°C. A backward-extrusion experiment was conducted to investigate liquid segregation during the thixoforming process. The results revealed that obvious grain coarsening and spheroidization occurred during prolonged isothermal treatments. In addition, higher soaking temperatures promoted the spheroidization and coarsening process because of the increased liquid fraction and the melting of second phases. Segregation of the liquid phase caused by the difference in fluidity between the liquid and the solid phases was observed in different regions of the thixoformed specimens.     

Stability Analysis of Stochastic Swarm Systems

In this paper,we present a model of stochastic swarm system and prove the stability of this kind of systems. We establish the stable aggregating behavior for the group using a coordination control scheme. This individual-based control scheme is a combination of attractive and repulsive interactions among the individuals in the group,which ensures the cohesion of the group and collision avoidance among the individuals. The dynamics of each individual depends on the relative positions between the individuals and the influences of the random disturbances. Under the influences of the noises,this position-based control strategy still generates the stable aggregating behavior harmoniously for the group and the self-organized swarm pattern is formed.     

Soil Organic Carbon Loss under Different Slope Gradients in Loess Hilly Region

Based on field runoff plots observation and sample analysis, the effect of slope gradient on soil organic carbon loss was studied under natural rainfall conditions in loess hilly region. The results showed that with slope gradient increasing （from10° to 30°）, the changing trend of soil erosion intensity （A） was A20°〉A30°〉A15°〉A10°〉A25°, suggesting that slope gradient between 20° and 25° was a critical degree ranger to exist. Soil organic carbon loss was mainly influenced by soil erosion intensity, appearing the same trend as did soil erosion intensity with increasing slope gradient. Soil erosion results in organic carbon enrichment in sediment. Average enrichment ratios of five runoff plots varied from 2.27 to 3.74, and decreased with increasing erosion intensity and slope gradient. The decrease of surface runoff and soil erosion is the key to reduce soil organic carbon loss.     

A New Generalized Similarity-Based Topic Distillation Algorithm

The procedure of hypertext induced topic search based on a semantic relation model is analyzed, and the reason for the topic drift of HITS algorithm was found to prove that Web pages are projected to a wrong latent semantic basis. A new concept-generalized similarity is introduced and, based on this, a new topic distillation algorithm GSTDA（generalized similarity based topic distillation algorithm） was presented to improve the quality of topic distillation. GSTDA was applied not only to avoid the topic drift, but also to explore relative topics to user query. The experimental results on 10 queries show that GSTDA reduces topic drift rate by 10% to 58% compared to that of HITS（hypertext induced topic search） algorithm, and discovers several relative topics to queries that have multiple meanings.     

Analysis of Conditional Value-at-Risk for Newsvendor with Holding and Backorder Cost under Market Search

We consider a distribution system with one supplier and two retailers. For the two retailers, they face different demand and are both risk averse. We study a single period model which the supplier has ample goods and the retailers order goods separately. Market search is measured as the fraction of customers who unsatisfied with their ＂local＂ retailer due to stock-out, and search for the goods at the other retailer before leaving the system. We investigate how the retailers game for order quantity in a Conditional Value-at-Risk framework and study how risk averse degree, market search level, holding cost and backorder cost influence the optimal order strategies. Furthermore, we use uniform distribution to illustrate these results and obtain Nash equilibrium of order strategies.     

Synthesis of CaCO3 crystals using hydroxypropylmethyl cellulose hydrogel as template

Calcium carbonate crystallization was performed in hydrogel of hydroxypropylmethyl cellulose (HPMC). Results showed that the polyhydroxy functionalities in HPMC gel network facilitated the nucleation of aragonite which was not found in experiment without HPMC hydrogel and in experiment using methylcellulose (MC) hydrogel as template. On the other hand, due to the unique assembly of the macromolecules in HPMC hydrogel network, which was different from other hydrogels used in some previous reports, particular crystal morphology, corncob-like CaCO_3, was obtained for the first time.