Physical layer impairments tolerance based lightpath provision in software defined optical network

As all-optical networks grow with ever increasing ultra-high speed, the communication quality suffers seriously from physical layer impairments ( PLIs) .The same problem still exists in software defined optical network ( SDON) controlled by OpenFlow.Aimed to solve this problem, a PLIs tol-erance based lightpath provision scheme is proposed for OpenFlow controlled optical networks.This proposed approach not only takes the OSNR model to represent those linear PLIs factors, but also in-troduces those nonlinear factors into the OSNR model.Thus, the proposed scheme is able to cover most PLIs factors of each optical link and conduct optical lightpath provison with better communica-tion quality.Moreover, PLIs tolerance model is also set up and considered in this work with some necessary extension to OpenFlow protocols to achieve better compatibility between physical layer im-pairments factors and various services connections.Simulation results show that the proposed scheme is able to get better performance in terms of packet loss rate and connection setup time.     

略谈磁性指向器的形制

司南是最早的磁性指向器.北宋时期,磁化技术的突破,导致磁性指向器的形制有了新的演变,其中,用针指向是磁性指向器形制最重要的改进.指南针的出现,极大提高了磁性指向器的指向精度,加快了磁偏现象的发现.之后,指南针的形制仍不断被改进,指南鱼发展成水罗盘,用以指向的木刻鱼被穿上小木条的磁针取代,"指南鱼"的形制消失;指南龟发展成枢轴支承式,成了旱罗盘.本文对磁性指向器的发明和演进过程稍作梳理,希望对帮助广大读者了解这一问题能够有所裨益.     

Discusses the Highway Construction Project Cost Effective Way to Control

成本控制在公路工程施工中非常重要,成本控制得好,对于整个工程项目来说也是质量的一个确保.文章从几个方面论述了成本控制的有效途径.     

走出我国公共部门人力资源绩效考核的困境

文章从我国公共部门人力资源绩效考核面临的现实问题入手，针对现有的考核体系作了比较系统的思考，并给出了相应的建议和措施。     

Optimal multi-asset investment with no-shorting constraint under mean-variance criterion for an insurer

This paper considers the optimal investment strategy for an insurer under the criterion of mean-variance. The risk process is a compound Poisson process and the insurer can invest in a risk-free asset and multiple risky assets. This paper obtains the optimal investment policy using the stochastic linear quadratic (LQ) control theory with no-shorting constraint. Then the efficient strategy (optimal investment strategy) and efficient frontier are derived explicitly by a verification theorem with the viscosity solution of Hamilton-Jacobi-Bellman (HJB) equation.     

Atomic layer deposition on Pd nanocrystals for forming Pd-TiO2 interface toward enhanced CO oxidation

Pd typically exhibits relatively low catalytic activity in CO oxidation, as CO is apt to be adsorbed on Pd to poison the surface for O2 activation. In this Letter, we report that this limitation can be overcome by integrating Pd with TiO2. The TiO2 was coated on Pd nanocubes with a controllable thickness using atomic layer deposition (ALD) method. Given the different work functions of TiO2 and Pd, the electrons in TiO2 semiconductor will flow toward Pd. With the electron density increased on Pd, the adsorption of CO to Pd will be weakened while the oxygen activation can be facilitated. Meanwhile, the interface-confined sites at Pd-TiO2 may further enhance the oxygen activation. As the species adsorption and activation are strongly correlated with electron density, the performance of Pd-TiO2 in CO oxidation turns out to depend on the TiO2 thickness, which determines the number of transferred electrons, within a certain range (<1.8 nm). This work provides a new strategy for enhancing catalytic performance through tailoring charge densities in hybrid catalysts.     

响应面法优化超声波辅助提取红曲米中水溶性色素

研究了红曲米中水溶性色素的超声波辅助提取法的提取工艺.在单因素实验的基础上,采用响应面法研究了超声时间、液料比和超声功率对提取液色价的影响,建立了二次回归模型,得到了提取工艺的最优条件.研究结果表明以上3因素对红曲米中水溶性色素的提取均有显著影响.在提取工艺条件:超声时间为20.6 min,液料比为32.2∶1,超声功率为730 W下提取,红曲米中水溶性色素的色价达到最大值,为570.5 U/g.     

Influence of B,Al and Nb addition on the glass forming ability and stability of mechanically alloyed Zr-Ni amorphous alloys

We investigated the influence of minor additions of B,Al and Nb that have representative atomic sizes on the glass forming ability (GFA) and stability of Zr-Ni amorphous alloys during mechanical alloying. The results show that the minor addition of B,Al or Nb does not shorten the initial time of the full amorphization reaction or improve the glass forming ability of the Zr-Ni alloys at a low rotation speed. However,B addition can effectively improve the mechanical stability of the amorphous phase against me...     

浅谈雷暴天气变化特征与注意事项

雷暴是一种重要的天气现象,也是一种灾害性天气。文章分别阐述了热雷暴、锋雷暴、地形雷暴的形成条件;雷暴来临时气象要素气温、气压、湿度、风、降水、的变化特征;雷暴观测和记录注意事项,以及其他注意事项。     

仿真软件在数控实训中的应用

太原理工大学工程训练中心选定了一种能在计算机上进行三维仿真,相当于真正的CNC机床的操作功能,并能进行手工编程或CAD/CAM自动编程,与国内数控机床有良好的兼容性的基于PC机上操作的英福花数控仿真软件.