对微光夜视仪器XX1140级联管的技术特性评估

文章根据实际测试、观察和查阅资料 ,分析国外XXll4 0微光级联管的数据 ,整理、总结了该管在设计及制造工艺方面的一些特点 ,为国内同行设计制造电真空器件特别是同类型微光管提供了方便     

长记忆SV模型的统计性质及其实证分析

给出与证明长记忆随机(LMSV)模型的矩与谱密度。波动替代量的长记忆性，与ARFIMA模型的关系，以及其时间聚合等统计性质；最后利用模型考察了上海股市波动的长记忆特性。     

对数型非线性电介质中低振幅空间明孤子的动态演化特性

研究了对数型非线性电介质中低振幅空间明孤子的动态演化特性．结果表明，在低振幅条件下空间明孤子的解析表达式与数值计算所得到的结果十分吻合．入射波为明孤子波时，能够在对数型非线性电介质中稳定传播．强度包络宽度变化与光源峰值功率成反比。     

防空火力分配对攻击机损失的影响分析

针对编队对地攻击过程中攻击机损失量的计算问题,提出了防空火力不同分配方式下攻击损失的计算方法。该方法利用攻击机和防空火力单元数以及防空火力单元对攻击机的损失概率,在防空火力平均分配和非平均分配情况下计算攻击机的损失量,通过实例对该方法的应用进行了详细说明,并对各种条件下攻击机的损失量进行了比较分析。从理论上证明了防空火力对攻击机平均分配时,攻击机的损失最大     

学龄前和学龄期儿童希氏束以上心动过速性心肌病高危因素分析

目的探讨学龄前和学龄期儿童希氏束以上的心动过速(室上性心动过速)与心动过速性心肌病的相关性及高危因素.方法选取室上性心动过速患儿179例,根据心动过速时心功能状态分为心肌病组23例,非心肌病组156例.分析患儿性别、年龄、发作类型、发作频率、持续时间、心室率与心功能损伤的关系和相关高危因素.结果 179例患儿中心动过速性心肌病23例,其中房室折返性、房室结折返性、无明确分类的心肌病分别为7例、10例、6例.房速所致心动过速性心肌病发生率为25.00%(8/32),明显高于阵发性室上性心动过速所致的心肌病发生率10.20%(15/147),差异具有统计学意义(P0.05).心肌病组患儿中房速所占比例、发作持续时间明显高于非心肌病组患儿,发作频率明显低于非心肌病组患儿,差异均具有统计学意义(P0.05).二元Logistic回归分析显示:发作持续时间是心动过速性心肌病的独立影响因素.结论学龄前和学龄期儿童室上性心动过速所致心动过速性心肌病的发生率为12.85%,其中房速所致的心肌病发生率明显高于阵发性室上性心动过速,发作持续时间是唯一高危因素.     

黑果腺肋花楸组培繁殖培养基筛选

以黑果腺肋花楸茎尖和嫩叶为外植体,在MS培养基中加入不同种类与用量的生长调节剂,筛选黑果腺肋花楸组织培养繁殖培养基.结果表明:黑果腺肋花楸愈伤组织诱导效果较好的培养基为MS+6-BA 3.0 mg/L+NAA 0.5 mg/L;不定芽诱导效果较好的培养基为MS+6-BA 1.0 mg/L+NAA 0.1 mg/L;不定根诱导效果较好的培养基为1/2 MS+IBA 0.05 mg/L;以泥炭土、松针、砂砾(2∶1∶1)为基质时,组培苗移栽成活率较高(成活率96%).     

Preparation and performance of a cold gas dynamic sprayed high-aluminum bronze coating

By mixing preheated high-aluminum bronze powders with different amounts of Al₂O₃ powder, a low-pressure cold-sprayed coating was prepared and sprayed onto a Cr12MoV steel substrate. The hardness of the coating and the bonding strength between the coating and the substrate were tested with a HV-1000 microhardness tester and a mechanical universal testing machine. The surface microstructure, cross-section and tensile fracture surface of the coating were observed with a scanning electron microscope (SEM). Correspondingly, the influences of the preheat treatment temperature of the bronze powder and the Al₂O₃ content on the coating performance were investigated. The results indicate that the hardness of bronze powders decreased and the coating deposition rate increased after the preheating treatment of the bronze powder. The Al₂O₃ content in the mixed powders contributed to the deformation of bronze powders during the spraying process. This trend resulted in varied performance of the coating.     

略论江西红色文化与高校学生党建工作

江西红色文化是中国共产党领导新民主主义革命在江西区域留下的丰硕成果,在物质和非物质两个层面展示出中华文明璀灿的光辉。高校是培养建成社会主义全面小康社会人才和接班人的重要阵地,学生党建工作更是事关实现中华民族伟大复兴。本文比较全面和深刻地分析了江西红色文化的载体、内涵和特征,就新时期高校学生党建工作面临挑战条件下,如何运用这一宝贵文化资源,创新学生党建的质量和水平,提出了理念思路和方式方法。     

Privacy Quantification Model Based on the Bayes Conditional Risk in Location-Based Services

The widespread use of Location-Based Services(LBSs),which allows untrusted service providers to collect large quantities of information regarding users’locations,has raised serious privacy concerns.In response to these issues,a variety of LBS Privacy Protection Mechanisms(LPPMs)have been recently proposed.However,evaluating these LPPMs remains problematic because of the absence of a generic adversarial model for most existing privacy metrics.In particular,the relationships between these metrics have not been examined in depth under a common adversarial model,leading to a possible selection of the inappropriate metric,which runs the risk of wrongly evaluating LPPMs.In this paper,we address these issues by proposing a privacy quantification model,which is based on Bayes conditional privacy,to specify a general adversarial model.This model employs a general definition of conditional privacy regarding the adversary’s estimation error to compare the different LBS privacy metrics.Moreover,we present a theoretical analysis for specifying how to connect our metric with other popular LBS privacy metrics.We show that our privacy quantification model permits interpretation and comparison of various popular LBS privacy metrics under a common perspective.Our results contribute to a better understanding of how privacy properties can be measured,as well as to the better selection of the most appropriate metric for any given LBS application.     

用于虚拟化环境的进程隔离方法研究与实现

针对虚拟化环境中用户进程运行安全问题,提出一种适用于虚拟化环境的进程隔离方法.该方法引入安全域作为进程隔离保护的基本单元,安全域是进程以及进程运行过程中依赖的环境构成的整体,通过建立安全域之间的依赖关系和安全域之间信息的交换规则,确保进程初始安全和运行过程中的隔离性.给出了安全域的相关概念和形式化描述,以及安全域之间信息流交换和依赖关系的建立方法和相关证明.以Xen虚拟化系统为基础,给出了该保护方法的具体实现以及实验结果,实验结果分析表明:该方法在虚拟化环境中能够抵御多种攻击手段,额外执行开销不超过10%.