莠去津在填充土柱中的运移

用土柱实验模拟莠去津在土壤中的运移、实验结果表明相当浓度的莠去津被淋溶到土柱的底部，说明莠去津对地下水存在很大威胁、应用CXTFIT的平衡与非平衡模型模拟莠去津在土柱中的运移，模拟结果表明CXTFIT的非平衡模型能很好地模拟莠去津的穿透曲线．由CXTFIT率定得到的莠去津在土柱实验中的吸附和降解参数和从批次实验得到的吸附和降解参数有较好的一致性．     

曝气生物流化床处理炼油厂含硫和高氨氮污水的研究

炼油厂含硫污水因含高浓度的油、COD、硫化物及挥发酚而难于生化降解，催化剂生产中排放的污水因含高浓度的氨氮、盐类、悬浮物质以及低浓度的有机物而成为水处理的难题．本文采用一种曝气生物流化床（ABFT）工艺，对含硫污水和催化剂高氨氮污水的混合污水进行了现场连续试验，结果表明：在混合污水COD为2090mg／L、氨氮为600mg／L、挥发酚为27mg／L和硫化物为154mg／L的情况下，ABFT系统出水COD为95mg／L、氨氮为4．0mg／L、挥发酚为0．30mg／L和硫化物为0．0067mg／L，出水达到了国家污水排放标准一级标准．在处理工艺中，动态氧化和混凝沉淀作为预处理，ABFT反应器采用了合成高分子载体固定化微生物技术，该载体具有大孔网状以及优良的机械强度和化学性能，高效微生物B350通过化学键固定在载体上．克氏定氮法表明，ABFT中生物负载量为32mg／L．试验结果显示：在处理高氨氮污水方面，ABFT工艺比SBR工艺具有更强的优势，同时，ABFT系统具有较高的处理效率和耐冲击负荷能力．     

Fe/Cr(001)超晶格层间耦合和自旋极化的第一性原理计算

采用基于密度泛函理论的平面波赝势法对Fe／Cr（001）起晶格的层间耦合和自旋极化进行了系统地研究．结果表明：理想Fe／Cr超晶格的层间耦合随反铁磁Cr层层数的增加呈短周期性振荡；在较稳定的结构中，整个Cr层都以较大的磁矩被极化，且极化程度受铁磁层原子数的影响较大．     

变更图的边添加

证明了:对任何整数t≥6和d≥2,从一条长为d的简单路通过添加t条边后得到的图的最小直径上界为[d-2/t 1] 2,如果d∈J'(t,k)={2k(t 1) 1,2k(t 1) 2,2k(t 1)-t 1}∪{2k(t 1)-t h:h=6,7,…,t};其他情形为[d-2/t 1] 1.这个证明改进了已知结果,而且[d-2/t 1] 1是最好的上界.     

The fate of injectant coal in blast furnaces: The origin of extractable materials of high molecular mass in blast furnace carryover dusts

The aim of the work was to investigate the fate of injectant coal in blast furnaces and the origin of extractable materials in blast furnace carryover dusts. Two sets of samples including injectant coal and the corresponding carryover dusts from a full sized blast furnace and a pilot scale rig have been examined. The samples were extracted using 1-methyl-2-pyrrolidinone (NMP) solvent and the extracts studied by size exclusion chromatography (SEC). The blast furnace carryover dust extracts contained high molecular weight carbonaceous material, of apparent mass corresponding to 10⁷?10⁸ u, by polystyrene calibration. In contrast, the feed coke and char prepared in a wire mesh reactor under high temperature conditions did not give any extractable material. Meanwhile, controlled combustion experiments in a high-pressure wire mesh reactor suggest that the extent of combustion of injectant coal in the blast furnace tuyeres and raceways is limited by time of exposure and very low oxygen concentration. It is thus likely that the extractable, soot-like material in the blast furnace dust originated in tars is released by the injectant coal. Our results suggest that the unburned tars were thermally altered during the upward path within the furnace, giving rise to the formation of heavy molecular weight (soot-like) materials.