多缸柴油机冷起动过程的模型研究

为了研究多缸柴油机冷起动瞬态过程的特点和影响因素，在原有的包括准维燃烧模型的单缸直喷式柴油机冷起动过程预测模型基础上，分析多缸机冷起动过程特点，建立了多缸直喷式柴油机冷起动过程的瞬态模型，在详细分析多缸柴油机冷起动特点的基础上，介绍了冷起动模型的主要构成和计算公式．     

异步轧制取向硅钢织构的模拟研究

本文系统地阐述了异步轧制剪切变形条件下板材冷轧织构的模拟计算理论;采用矢量法根据实测的ＯＤＦ构造板材的原始组织、在假设临界滑移系开动几率均等的条件下,运用Ｔａｙｌｏｒ模型对取向硅钢的亚表层和中心层的冷轧织构进行电算模拟;在此基础上,对剪切变形条件一些轧制因素的影响进行了讨论。     

GFC-空间中的参数型KKM定理及其应用

首先证明了GFC-空间的一个特征性质,然后通过引进线性序空间,在非紧的GFC-空间中证明了一个参数型KKM定理.应用参数型KKM定理得到了一些新的非紧的极大极小不等式.     

函数再现机构的可靠性综合

以曲柄滑块机构为例，提出了函数再现机构的可靠性综合方法．首先由机构的允许输出误差应用可靠性概念确定各构件尺寸，然后用概率法分配各构件的尺寸公差．从而使机构具有预定的可靠度．     

初始排污权拍卖的博弈分析

基于一级密封价格拍卖方式,建立了排污权交易制度中初始排污权分配的不完全信息静态博弈模型,对模型进行了分析,认为况标拍卖方式是初始排污权的一种合理的分配方式,并得到投标人越多,政府管理机构所得收益越高的结论。     

Undoped semi-insulating indium phosphide (InP) and its applications

During the past several years, the research and development of InP material has made great progress due to serving as the substrate for most optoelectronic devices operating at the communications wavelength of 1.31 and 1.55 μm. At present, InP has become an important semiconductor material together with Si and GaAs. When compared to GaAs, InP has higher electron velocity, higher radiation hardness and better heat-conducting property. The advantage of InP crystal material allows higher frequency operation and lower power requirements. Therefore, InP is widely being used for the manufacture of microwave devices, high-frequency devices and optoelectronic integrated circuits (OEICs) which are indispensable for wireless technology, satellite communications^[1—3]. Although n-type and p-type InP can meet actual needs, semi-insulating InP substrates remain to be improved due to their poor uniformity and consistency. For this reason, several possible approaches have been reported to the preparation of SI InP by wafer annealing under different conditions^[4—9].     

A study on nano-sized NiO electrodes doping with C and Co prepared by electrochemical deposition-sintering processes and their capacitance performance

In the present work, it was studied that nanoosized NiO electrodes doping with C and Co were prepared by electrochemical deposition in an ethanol solution containing nickel nitrate and cobalt nitrate and sintering processes. The capacitance performance of such electrodes was also studied. The results reveal that samples obtained by electrochemical deposition first on a porous nickel cathode in an ethanol solution contain 0.5 mol/L nitrates, in which Ni(NO3)2 and Co(NO3)2 were mixed in a molar proportion of 8 : 2. After sintering at 300℃ for 2 h, they exhibited the best performance. XRD analysis illustrates that the essential phase of the product is NiO doping with certain content of C and Co. The particles of product imaged a spherical morphology with sizes of 20---30 nm in diameter, and with an average crystal size of 4--5 nm. The capacitance measurement of the simulating C/NiO capacitors indicates that a single electrode can reach as high as 410.0 F/g, and still maintain the value of 323 F/g after 30 recycles showed as a stabilized value with increasing recycles, when it was discharged at a current of 5 mA.     

基于J2EE构架的药物与靶点综合数据库及其查询系统（DTDB）的设计与实现

本文扼要介绍了作者收集、整理目前已发现的所有药物及其作用靶点的相关信息,并整合现代分子生物、药物、化学等的最新进展,采用业界领先的Java的j2ee框架,建立一个综合的数据库系统的过程。同时在该综合数据库系统的基础上,嵌入药物分子和靶点的对接技术,使得我们的系统除用于一般的药物分子和靶点查询之外,还能实现基于分子反向对接的虚拟筛选和通过药物分子寻找其作用的潜在蛋白靶点。本数据库暂时只能本机访问,对外访问地址尚在建设中。     

真菌诱导物对丹参毛状根氧化酶活性的影响

从一种广谱病原真菌－大丽轮枝菌的菌丝体中制备激发子,用该激发子和商品生物制剂－酵母提取物分别诱导对数生长期的丹参毛状根,发现丹参毛状根过氧化物酶（POD）,过氧化氢酶（CAT）和多酚氧化酶（PPO）活性在诱导后均显著增加,三种酶的活性并随诱导时间和诱导剂的浓度的增加而改变,大丽轮枝菌激发子的作用强于酵母提取物,表现为诱导酶活性峰值较高和峰值时间提前。     

新型电致发光材料聚对苯乙炔的制备

报道了新型电致发光材料聚对苯乙炔的制备过程和有关测试结果。发现恒重后的双锍盐含有二个结晶水这一新现象，并确认最终产物为聚对苯乙炔。