小卫星分布式雷达

小卫星分布式雷达是一种新概念雷达系统 ,具有重要的应用前景。本文讨论了小卫星分布式雷达的基本概念 ,探讨了其在未来航天装备中的作用和地位 ,阐明了小卫星分布式雷达技术的科技内涵 ,最后提出了对我国发展天基雷达的几点思考     

Nuclear Technique and Agriculture in China

Nuclear technique is a powerful scientific tool in agricultural research, an area with fruitful achievements in China. Application of nuclear technique in agriculture (Nuclear Agricultural Sciences) based on the development of related science and technology is a high-tech area, and also a significant aspect of non-electrical power application of nuclear technique. As an important component of agricultural science and technology, Nuclear technique application in agricultural field has achieved a lot and made remarkable contributions to the economic, social and ecological development of China. The current paper reviews the achievements, and presents the situation of the application of nuclear technique in the Chinese a-griculture briefly. The author strongly suggests that Chinese     

Research Frontiers of Agricultural Economics and Management

The focus of research on Agricultural Economics and Management (AEM) has been switching from de-veloped countries to developing countries. In important international journals on AEM such as ““American Jour-nal of Agricultural Economics““ and ““Agricultural Eco-nomics““, the research objectives mainly focus on AEM problems in developing countries, e.g. the effects ofglobalization and liberalization on agricultural produc-tion in developing countries, and problems in agricul-tural resources and environmental protections in devel-oping countries.     

Fabrication and Properties of CoSm-Based Multilayer Thin Films

In recent years, SmCo series thin films have been found to be good candidates for fabricating integrated electromagnetic components and ultrahigh density magnetic recording media[1,2]. Up to now,intensive studies of such films have been carried out in order to obtain appropriate microstructure, crystallographic orientation and other properties. Substitution of Cu or Ni for Co in SmCo/Cr series films leads to a decrease of the saturation magnetization, magnetic switching volume, and to an increase of uniaxial anisotropy and coercivity[3-5].Various deposition conditions have also been investigated[6]. The large increase in coercivity for the annealed SmCo/Cr films is due to the growth of crystallitest[7,8]. In this article, we report a study of the deposition process,structure, and magnetic behavior of sputtered Sm (Co,Cu, Ti)/Cr series thin films.     

Growth of Magnetite Nanoparticles under Magnetic Fields

1 Introduction Over the past several years, the preparation and characterization ofnanoscale magnetic materials, especially one-dimensional (1D) nanostructure, have attracted much attention as the nanomaterials would allow investigating the fundamental aspects of magnetic-ordering phenomena in magnetic materials with reduced dimensions and could lead to new potential applications such as data storage technology[1-6].     

IPv6与移动互联网

IPv6为适应未来网络基础设施的数量和质量的需求设计,是新一代移动互联网的核心技术.在分析了IPv6在移动通信方面的技术优势的同时,详细讨论了IPv6给中国互联网带来的商业机遇.     

机械合金化工艺对Fe-Ni合金显微结构的影响

对机械合金化制备的Fe-Ni粉体利用X射线衍射(XRD)进行分析，得到了不同Ni含量和不同球磨时间Fe-Ni纳米晶的XRD谱．实验表明，w(Ni)=10％和20％时，Ni溶入Fe晶格，分别在球磨20h和50h后形成单一的a(bcc)相；w(Ni)=50％时，其先后经历了γ(fcc)→←a(bcc)正逆转变，在球磨120h后最终形成单一γ(fcc)相．无论是a(bcc)相还是γ(fcc)相．它们的固溶度均比块体Fe-Ni合金显著提高．w(Ni)=35％时，则始终是两相共存．对试样的XRD谱采用3种不同的方法测定了Fe-Ni粉体的晶粒尺寸和显微畸变，发现经球磨20h后，不同Ni含量的粉体均呈纳米结构，并随球磨时间延长，Fe-Ni纳米晶的晶粒尺寸下降而显微畸变上升．     

土体注浆后的性能分析

应用Mohr-Coulomb屈服准则,推导了注浆后岩土体的屈服函数.根据位于205国道上某土质边坡的实际情况,利用现场实测数据和实验数据,分别对注浆前后坡体的破坏状态、不同位置位移的变化情况以及坡体的整体稳定性等方面进行了模拟计算.结果表明,注浆后岩土体的弹性区域显著增大,侧向位移明显减小,而岩土体的剪应力屈服区域则由集中趋于分散.     

连铸板坯凝固过程的应变分析

通过建立连铸板坯凝固过程的传热模型和采用实测温度数据进行检验,获得了铸坯温度及坯壳厚度的数据.在此基础上建立了凝固过程的应变分析模型,得到了实际工况条件下坯壳所受的拉应变.结果表明,在正常工况下,连铸坯凝固前沿所受的应变很小,铸坯不会产生内部裂纹;当导辊开口度的偏差大于2mm时,其引起的应变大于鼓肚应变,且凝固前沿所受的应变大于临界应变,内部裂纹发生的可能性很大.支撑辊对中精度是产生内部裂纹的重要影响因素.     

控制冷却对CSP低碳锰钢组织和性能的影响

利用Gleeble1500热模拟机测定了薄板坯连铸连轧EAF-CSP工艺生产的低碳含锰钢经奥氏体区二次变形后的CCT曲线.实验钢含有0.17%C,1.21%Mn和0.28%Si(质量分数).研究表明:提高热轧后的冷却速度使Ar3温度降低,导致试验钢的晶粒进一步细化;冷速大于20℃/s时,出现贝氏体和铁素体的混合组织,可降低钢的屈强比;790℃终轧,550℃卷曲时出现铁素体/珠光体带状组织,提高冷速使溶质(如Mn和C)富集区在形成珠光体之前完成奥氏体-铁素体相变是避免生成铁素体/珠光体带状组织的有效方法.