Effects of welding wire composition and welding process on the weld metal toughness of submerged arc welded pipeline steel

The effects of alloying elements in welding wires and submerged arc welding process on the microstructures and low-temperature impact toughness of weld metals have been investigated. The results indicate that the optimal contents of alloying elements in welding wires can improve the low-temperature impact toughness of weld metals because the proeutectoid ferrite and bainite formations can be suppressed, and the fraction of acicular ferrite increases. However, the contents of alloying elements need to vary along with the welding heat input. With the increase in welding heat input, the contents of alloying elements in welding wires need to be increased accordingly. The microstructures mainly consisting of acicular ferrite can be obtained in weld metals after four-wire submerged arc welding using the wires with a low carbon content and appropriate contents of Mn, Mo, Ti-B, Cu, Ni, and RE, resulting in the high low-temperature impact toughness of weld metals.     

Right prefrontal laterality of Chinese boys during a Chinese high conflict Stroop task measured by multi-channel near-infrared spectroscopy imaging

Some studies have shown that native Chinese speakers have different laterality in matched Stroop tasks from native English speakers. Recently, many imaging data, which show left laterality of English-matched Stroop interference, have been reported. And a few functional imaging studies have been conducted to investigate the phenomenon of the Chinese version of Stroop task. In this study, functional activity in the lateral prefrontal cortex of a group of normal Chinese boys with functional near-infrared imaging during a Stroop color-word task was measured to show different Stroop interferences in the prefrontal cortex. The results show obvious fluctuation of the cerebral blood volume in the right prefrontal cortex in all boys, which agrees with the finding of previous studies, that is, Chinese native boys have right laterality in their brain when the Chinese version of Stroop color-word task is applied.     

Retrospect to Human Deep Space Exploration History and Its Prospect in China

1The Goals of Deep Space ExplorationThe deep space exploration is relative to nearearth space exploration.According to theWhitePaper on China’s Space Activities in2000[1],theexploration of space other than earth is presentcalled“Deep Space Exploration”in China.Thisconception is not unchangeable.It will evolvewith improvement of space technologies andcapabilities of mankind.Generally activities of human space can becategorized into three fields:Earth ApplicationSatellite,Manned Space…     

Alkaline digestion behavior and alumina extraction from sodium aluminosilicate generated in pyrometallurgical process

In pyrometallurgical process, Al-and Si-bearing minerals in iron and aluminum ores are easily transformed into sodium aluminosilicates in the presence of Na₂O constituents, which alters the leaching behaviors of Al₂O₃ and SiO₂. It was confirmed that sodium aluminosilicates with different phase compositions synthesized at various roasting conditions were effectively digested in the alkaline digestion process. Under the optimum conditions at temperature of 100-120℃, liquid-to-solid ratio (L/S) of 10:2 mL/g, caustic ratio of 4, and Na₂O concentration of 240 g/L, the actual and relative digestion ratio of Al₂O₃ from the synthesized sodium aluminosilicates reached maximums of about 65% and 95%, respectively, while SiO₂ was barely leached out. To validate the superior digestion property of sodium aluminosilicate generated via an actual process, the Bayer digestion of an Al₂O₃-rich material derived from reductive roasting of bauxite and comprising Na_1.75Al_1.75Si_0.25O₄ was conducted; the relative digestion ratio of Al₂O₃ attained 90% at 200℃.     

A new synthetic route to MgO-MgAl2O4-ZrO2 highly dispersed composite material through formation of Mg5Al2.4Zr1.7O12 metastable phase:synthesis and physical properties

Mg₅Al_2.4Zr_1.7O₁₂ metastable phase was successfully synthesized from analytical-grade MgO, α-Al₂O₃, MgAl₂O₄, and ZrO₂ under an N₂ atmosphere. The sintering temperature was varied from 1650 to 1780℃, and the highest amount of Mg₅Al_2.4Zr_1.7O₁₂ appeared in the composite material when the sintering temperature was 1760℃. According to our research of the formation mechanism of Mg₅Al_2.4Zr_1.7O₁₂, the formation and growth of MgAl₂O₄ dominated when the temperature was not higher than 1650℃. When the temperature was higher than 1650℃, MgO and ZrO₂ tended to diffuse into MgAl₂O₄ and the Mg₅Al_2.4Zr_1.7O₁₂ solid solution was formed. When the temperature reached 1760℃, the formation of Mg₅Al_2.4Zr_1.7O₁₂ was completed. The effect of MgAl₂O₄ spinel crystals was also studied, and their introduction into the composite material promoted the formation and growth of Mg₅Al_2.4Zr_1.7O₁₂. A highly dispersed MgO-MgAl₂O₄-ZrO₂ composite material was prepared through the decomposition of the Mg₅Al_2.4Zr_1.7O₁₂ metastable phase. The as-prepared composite material showed improved overall physical properties because of the good dispersion of MgO, MgAl₂O₄, and ZrO₂ phases.     

Spheroidization of silica powders by radio frequency inductively coupled plasma with Ar-H2 and Ar-N2 as the sheath gases at atmospheric pressu

Amorphous spherical silica powders were prepared by inductively coupled thermal plasma treatment at a radio frequency of 36.2 MHz. The effects of the added content of hydrogen and nitrogen into argon (serving as the sheath gas), as well as the carrier gas flow rate, on the spheroidization rate of silica powders, were investigated. The prepared silica powders before and after plasma treatment were examined by scanning electron microscopy, X-ray diffraction, and laser granulometric analysis. Results indicated that the average size of the silica particles increased, and the transformation of crystals into the amorphous state occurred after plasma treatment. Discharge image processing was employed to analyze the effect of the plasma temperature field on the spheroidization rate. The spheroidization rate of the silica powder increased with the increase of the hydrogen content in the sheath gas. On the other hand, the spheroidization rate of the silica power first increased and then decreased with the increase of the nitrogen content in the sheath gas. Moreover, the amorphous content increased with the increase of the spheroidization rate of the silica powder.     

Ultrafastly activated needle coke as electrode material for supercapacitors

The uniform porous structure makes activated porous carbons(APCs) superior electrode material.Traditionally,APCs are produced by a combination of time-consuming high-temperature heat treatment and activation,with a production time of up to several hours.The produced APCs have relatively low specific surface area(SSA) and porosity.Therefore,the electrochemical performance is poor,which limits its application in high-power energy storage devices.Here,APCs materials are directly synthesized by a hi...     

Research on C3N4 Superhard Compound Thin Film and Its Application

By combination of DC reactive magnetron sputtering with multiple arcplating, the alternating C3N4/TiN compound film is deposited onto HSS. The core level binding energy and contents of carbon and nitrogen are characterized by X-ray photoelectron spectrum. X-ray diffraction (XRD) shows that compound thin film contains hard crystalline phases of α-C3N4 and β-C3N4.The Knoop microhardness in the load range of 50.5-54.1GPa is measured. According to acoustic emission scratch test, the critical load values for the coating on HSS substrates are in the range of 40-80N. The metal coated with C3N4/TiN compound films has a great improvement in the resistance against corrosion. Many tests show that such a coating has a very high wearability. Compared with the uncoated and TiN coated tools, the C3N4/TiN coated tools have a much longer sutting life.     

Identification and characterization of two novel box HACA snoRNAs from Schizosaccharomyces pombe

Through constructing a specialized cDNA library based on small RNAs isolated from partial purified nuclei of Schizosaccharomyces pombe, two novel noncoding RNAs, termed Sp15-70 and Sp18-61, have been identified. Bioinformatics analysis reveals that both the novel RNAs possess a typical secondary structure of box HACA snoRNA and antisense elements to rRNAs. According to the relationship between the structure and function of box HACA snoRNA, Sp15-70 was predicted to direct pseudouridylation in 25S rRNA at U2401 and U2298; Sp18-61 was predicted to direct pseudouridylation in 18S rRNA at U208 and 25S rRNA at U2341. The four predicted pseudouridylation sites were all verified experimentally by the CMC-primer extension analysis. Both Sp15-70 and Sp18-61 were encoded by single copies which were located in the intergenic regions between the CDS of two protein-coding genes on chromosome Ⅰ and Ⅲ of S. pombe, respectively. Putative TATA-like elements can be found upstream from the 5′ end of these snoRNA genes, suggesting that they could be transcribed from their own promoters. Comparison of the two snoRNAs and their functional homologues in diverse organisms reveals that extensive recombinations among different snoRNAs have occurred during the evolution from their primitive progenitors.     

一种自适应的复合多路flash存储结构

提出一种复合多路的flash存储结构CMFSA，在此基础上研究了系统故障失败后flash文件系统的快速恢复机制以及自适应多路并行存储问题．实验结果表明，CMFSA在系统故障后可实现快速启动，与其他算法相比，自适应算法在减少写等待的同时保证了多芯片间的损耗均衡性．