ORGANIZATIONAL LEARNING AND VENDOR SUPPORT QUALITY BY THE USAGE OF APPLICATION SOFTWARE PACKAGES： A STUDY OF ASIAN ENTREPRENEURS

In this paper we study how organizational learning impacts organizational behavior, and howvendor support quality enhances product adoption and usage behavior.These constructs were verifiedusing Application Software Packages(ASP)-a prewritten, precoded, commercially available set ofprograms that eliminates the need for individuals or organizations to write their own softwareprograms for certain functions. The relationship between ASP usage, usage outcomes and useprocesses were also investigated. Two hundred and ninety-five Chinese, Indian, and Malayentrepreneurships were studied. It was found that usage outcome strongly determines usage, while useprocess has only an indirect relationship (via outcome) on usage. The impact of organizational learningand vendor service quality on usage, usage outcome, and use process were robust. Theoretical andpractical implications of the research are discussed.     

Structural characterization of AA 2024-MoSi2 nanocomposite powders produced by mechanical milling

Nano-sized MoSi₂ powder was produced successfully from commercially available MoSi₂ by a mechanical milling process carried out for 100 h, and mechanical alloying was employed to synthesize AA 2024-MoSi₂ nanocomposites. The effects of MoSi2 reinforcement and mechanical milling on the structure, morphology, and iron contamination of the produced materials were investigated using X-ray diffraction, scanning electron microscopy, and atomic absorption spectrometry. It is revealed that the morphology of the aluminum alloy changes continuously during milling from spherical to plate-like, irregular, and finally equiaxed. The presence of MoSi₂ reinforcement accelerates the milling process and results in a smaller average particle size. The Williamson-Hall method determined that the crystallite size of the aluminum alloy in the composite powder is smaller than that of the unreinforced alloy at the same milling time and this size reaches 45 nm after 16 h milling time. The Fe contamination content is higher for the nanocomposite in comparison with the unreinforced alloy because of the wearing role of MoSi₂ hard particles.     

Mechanical and wear properties of Al-Al3Mg2 nanocomposites prepared by mechanical milling and hot pressing

β-Al₃Mg₂ intermetallic was used as a reinforcing agent to improve the mechanical properties of an aluminum matrix. Different amounts of Al₃Mg₂ nanoparticles (ranging from 0wt% to 20wt%) were milled with aluminum powders in a planetary ball mill for 10 h. Consolidation was conducted by uniaxial pressing at 400°C under a pressure of 600 MPa for 2 h. Microstructural characterization confirms the uniform distribution of Al₃Mg₂ nanoparticles within the matrix. The effects of nano-sized Al₃Mg₂ content on the wear and mechanical properties of the composites were also investigated. The results show that as the Al₃Mg₂ content increases to higher levels, the hardness, compressive strength, and wear resistance of the nanocomposites increase significantly, whereas the relative density and ductility decrease. Scanning electron microscopy (SEM) analysis of worn surfaces reveals that a transition in wear mechanisms occurs from delamination to abrasive wear by the addition of Al₃Mg₂ nanoparticles to the matrix.     

Synergistic effect of Al and Gd on enhancement of mechanical properties of magnesium alloys

The effect of Gd/Al ratio on the properties of as-cast Mg-Gd-Al-Zn alloys was investigated by changing the chemical composition from that of AZ61 to GZ61. At the ratio of 1, the Al2Gd phase becomes predominant and Mg17Al12 is hardly seen in the microstructure. As a potent inoculant, the Al2Gd phase resulted in intense grain refinement and enhancement of strength, ductility and toughness. For instance, the tensile strength and elongation to failure of Mg-3Gd-3Al-1Zn alloy were enhanced by ~4% and 180% compared with those of AZ61 alloy, respectively. However, at high Gd/Al ratios, the Al2Gd phase was replaced by (Mg,Al)3Gd and Mg5Gd phases and very large grain sizes were achieved, which led to poor tensile properties and the appearance of cleavage facets on the fracture surfaces. Therefore, it can be deduced that the presence of Gd and Al, in appropriate amounts to reach Gd/Al ratio of ~ 1, is required for the achievement of grain refinement, good ductility, high strength, and the appearance of ductile fracture surfaces in the Mg-Gd-Al-Zn system. Conclusively, the Mg-Gd-Al-Zn alloys can be considered as a new class of structural magnesium alloy and it is superior to both AZ (Mg-Al-Zn) and GZ (Mg-Gd-Zn) series of alloys.     

Corrosion behavior of Ni–P/nano-TiC composite coating prepared in electroless baths containing different types of surfactant

In current research, in order to enhance the incorporation of nano-sized TiC particles into electroless Ni–P (EN) coating, different types of surfactant (cationic, anionic, and polymeric) were added to the plating bath. The effects of addition of the surfactants on surface morphology, deposition rate, TiC and P contents of the prepared coatings were investigated. The surface morphology was evaluated by scanning electron microscopy (SEM). It was demonstrated that in the presence of the anionic, polymeric and somehow cationic surfactants, TiC nano-particles were embedded in the matrix which influenced the surface morphology. The effect of surfactant types on the corrosion properties of Ni–P/TiC coated steel was also studied. Corrosion behavior of the coated steel was evaluated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) which affected by the incorporation of TiC particles into the Ni–P matrix. The level of corrosion resistance improvement depended largely on the phosphorous and TiC concentration of the applied coating.     

Preparation of electroless Ni–P composite coatings containing nano-scattered alumina in presence of polymeric surfactant

Ni–P electroless coating was applied on low carbon steel with the incorporation of different amounts of nano Al2O3 powder (ranging from 3 g/l to 30 g/l) in electroless bath. Corrosion properties and microstructures of the coating were studied. The dispersion stability of alumina colloidal particles stabilized by polymeric (non-ionic) surfactants in an electroless bath was also investigated. The surface morphology and the relevant structure were evaluated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). Corrosion behavior of the coated steel was evaluated by electrochemical impedance spectroscopy (EIS) and polarization techniques. The results showed that increasing alumina concentration not only changed the surface morphology, but also promoted the corrosion resistance. Addition of surfactants has an indirect effect on the amount of the incorporated particles. Meanwhile, in the presence of surfactant, corrosion resistance of Ni–P coating containing even a small quantity of alumina was improved since a stabilized bath was obtained.     

Influence of shielding gas on the mechanical and metallurgical properties of DP-GMA-welded 5083-H321 aluminum alloy

In the present research, 6-mm-thick 5083-H321 aluminum alloy was joined by the double-pulsed gas metal arc welding (DP-GMAW) process. The objective was to investigate the influence of the shielding gas composition on the microstructure and properties of GMA welds. A macrostructural study indicated that the addition of nitrogen and oxygen to the argon shielding gas resulted in better weld penetration. Furthermore, the tensile strength and bending strength of the welds were improved when oxygen and nitrogen (at concentrations as high as approximately 0.1vol%) were added to the shielding gas; however, these properties were adversely affected when the oxygen and nitrogen contents were increased further. This behavior was attributed to the formation of excessive brown and black oxide films on the bead surface, the formation of intermetallic compounds in the weld metal, and the formation of thicker oxide layers on the bead surface with increasing nitrogen and oxygen contents in the argon-based shielding gas. Analysis by energy-dispersive X-ray spectroscopy revealed that most of these compounds are nitrides or oxides.