Fabrication of homogeneously dispersed graphene/Al composites by solution mixing and powder metallurgy

Graphene-reinforced aluminum (Al) matrix composites were successfully prepared via solution mixing and powder metallurgy in this study. The mechanical properties of the composites were studied using microhardness and tensile tests. Compared to the pure Al alloy, the graphene/Al composites showed increased strength and hardness. A tensile strength of 255 MPa was achieved for the graphene/Al composite with only 0.3wt% graphene, which has a 25% increase over the tensile strength of the pure Al matrix. Raman spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy were used to investigate the morphologies, chemical compositions, and microstructures of the graphene and the graphene/Al composites. On the basis of fractographic evidence, a relevant fracture mechanism is proposed.     

高原环境下AMT汽车动力性换挡规律分析

针对内燃机汽车性能受高原地区海拔高度的影响,在分析海拔高度的改变对发动机性能影响的基础上,建立整车动力传动系统仿真模型,分析高原环境下AMT汽车动力性换挡规律。通过对最佳动力性换挡规律控制参数进行修正,提出了基于不同海拔高度的动力换挡规律制定方法,并进行了仿真验证。仿真结果表明:在高原行驶环境下,采用所提出的高原环境动力性换挡规律,明显改善了AMT汽车在高原环境行驶时的动力性能,提高了汽车高原环境适应能力。     

Experimental investigation and thermodynamic assessment of the yttriumhydrogen binary system

A coupled experimental investigation and thermodynamic study of the yttrium-hydrogen(Y-H) binary system were carried out to provide more comprehensive and quantitative insights into the key thermodynamic properties of this system. Y-H system in the full range of H/Y = 0–3.0 was investigated by accurate pressure composition isotherm(PCI) measurement to provide credible phase equilibria information and thermodynamic data.The phase boundaries obtained were in agreement with previous experimental data but with improved accuracy.With the guide of the crystal structures, all the solid phases were modelled using the three sublattice model. The Y-H phase diagram and thermodynamic parameters were calculated and assessed with the CALPHAD technique.The obtained results are in very good agreement with our experimental data and the published data reported in literature. The obtained thermodynamic database of Y-H system can be used to predict the hydrogenation behavior and decomposition temperatures of hydrides.     

房地产建安工程成本控制措施浅谈

房地产建安工程成本是房地产成本管理的重要工作,实现开发利润最大化的主要措施之一。论文根据房地产建安工程成本控制的实际经验,总结了成本控制的具体措施及方法。     

High-performance flexural fatigue of carbon nanotube yarns

Carbon nanotube yarns （CNTY） possess good specific strength and specific conductivity. As such, their potential for commercial applications is significant. Fatigue performance is a significant consideration in yarn/wire applications. In this study, the flexural fatigue performance of CNTY spun from super-aligned carbon nanotube arrays was investigated using a reversed bending test. The results showed that CNTY exhibited excellent resistance to pure flexural fatigue, significantly outperforming stainless steel wire; CNTY failed where a combination of flexural fatigue and tension-tension fatigue had special hollow fracture morphology, and CNTY resistance remained fundamentally unchanged in the combination fatigue process.     

Z-164D溶液对铝土矿强度的影响及其作用机理

以Z-164D为助磨剂，对广西田阳铝土矿进行了邦德球磨功指数试验和单轴抗压强度试验.结果表明:铝土矿经水和Z-164D溶液浸泡后，邦德球磨功指数分别下降了105%和379%，单轴抗压强度分别下降了2684%和4279%.红外光谱分析及X射线能谱微区元素分析表明，Z-164D只能在铝土矿表面发生物理和化学吸附，并不能够渗入铝土矿内部.建立了Z-164D溶液对铝土矿强度影响的作用机理模型，水分子与Z-164D相互促进，共同导致铝土矿缺陷程度增加、强度降低.     

Guaranteed Cost Finite-Time Control of Fractional-Order Nonlinear Positive Switched Systems with D-Perturbations via MDADT

This paper is concerned with the problem of guaranteed cost finite-time control of fractionalorder nonlinear positive switched systems(FONPSS) with D-perturbation. Firstly, the proof of the positivity of FONPSS with D-perturbation is given, the definition of guaranteed cost finite-time stability is firstly given in such systems. Then, by constructing linear copositive Lyapunov functions and using the mode-dependent average dwell time(MDADT) approach, a static output feedback controller is constructed, and sufficient conditions are derived to guarantee that the corresponding closed-loop system is guaranteed cost finite-time stable(GCFTS). Such conditions can be easily solved by linear programming. Finally, an example is provided to illustrate the effectiveness of the proposed method.     

基于双响应曲面的精密产品子集模拟可靠稳健优化设计

针对不确定性场景下小失效概率的精密产品可靠性问题,提出了基于双响应曲面法(dual response surface methodology,DRSM)与子集模拟的可靠稳健优化方法。首先,建立精密产品多失效模式极限状态的RSM模型和以质量特性均值-方差为优化目标的功能函数DRSM模型。其次,在此基础上运用子集模拟法进行可靠性分析,将精密产品小失效概率描述成一系列较大的条件失效概率之积。最后,将极值事件的优化问题视作稀有事件的可靠性问题的特例,基于该转换思想采用子集模拟法将优化问题在可靠性问题的框架内进行求解。案例分析及验证结果表明所提方法的有效性。