均匀棒纯纵向运动初值问题混合有限元方法的H(div)模误差估计

笔者继续考虑均匀棒纯纵向运动初值问题的混合有限元方法[1],利用广义混合椭圆投影的误差估计,给出了H(div)模最优误差估计,使得该问题得到进一步的解决.     

Rolling-induced microstructure change in Zr_（65）Al_（7.5）Ni_（10）Cu_（12.5）Ag_5 bulk metallic glass

The microstructures and free-volume evolutions of as-cast and pre-annealed Zr65Al7.5Ni10Cu12.5Ag5 bulk metallic glasses during rolling deformation have been investigated. No phase transformation is detected in the as-cast/rolled specimen. However,the structural stability of the glass against plastic deformation is worse after pre-annealing,indicated by nanocrystallization in preannealed/rolled specimens with large deformation degrees. Moreover,with increasing deformation degree,the free-volume content in a pre-annealed/rolled specimen increases at a lower average rate than that in an as-cast/rolled specimen.     

Structures of APC/C(Cdh1) with substrates identify Cdh1 and Apc10 as the D-box co-receptor

The ubiquitylation of cell-cycle regulatory proteins by the large multimeric anaphase-promoting complex (APC/C) controls sister chromatid segregation and the exit from mitosis. Selection of APC/C targets is achieved through recognition of destruction motifs, predominantly the destruction (D)-box and KEN (Lys-Glu-Asn)-box. Although this process is known to involve a co-activator protein (either Cdc20 or Cdh1) together with core APC/C subunits, the structural basis for substrate recognition and ubiquitylation is not understood. Here we investigate budding yeast APC/C using single-particle electron microscopy and determine a cryo-electron microscopy map of APC/C in complex with the Cdh1 co-activator protein (APC/C(Cdh1)) bound to a D-box peptide at ～10 ? resolution. We find that a combined catalytic and substrate-recognition module is located within the central cavity of the APC/C assembled from Cdh1, Apc10--a core APC/C subunit previously implicated in substrate recognition--and the cullin domain of Apc2. Cdh1 and Apc10, identified from difference maps, create a co-receptor for the D-box following repositioning of Cdh1 towards Apc10. Using NMR spectroscopy we demonstrate specific D-box-Apc10 interactions, consistent with a role for Apc10 in directly contributing towards D-box recognition by the APC/C(Cdh1) complex. Our results rationalize the contribution of both co-activator and core APC/C subunits to D-box recognition and provide a structural framework for understanding mechanisms of substrate recognition and catalysis by the APC/C.     

模糊综合评判高等职业院校师资队伍建设研究—以宁夏职业技术学院为例

运用模糊综合评判法和相关理论,对宁夏职业院校师资队伍现状进行了定性和定量分析,采用Delphi法及AHP法确立指标体系,进行了实证研究,以期为高等职业院校师资队伍建设提供参考.     

等离子熔积成形混相瞬态场的Level-Set方法模拟

提出了一种二维等离子熔积成形瞬态模型,该模型描述了液／气界面的自由表面发展,并模拟了熔池内流体流动和传热．采用Level—Set方法处理液／气界面边界条件,考虑了熔体流动的主要驱动力——表面张力梯度、表面曲率、浮力以及工件表面的对流散热等因素．用固液相统一模型来描述固／液界面处的熔融和凝固过程,并开发了相应的软件．对高温合金K163在不同扫描速度下的熔积层表面形貌、温度场以及熔池内流场进行了模拟分析．     

基于神经网络的图像描述方法研究

自动识别和描述图像的内容是人工智能中一个重要的研究方向,它涉及计算机视觉和自然语言处理技术。针对这一难题,提出了一种由深层神经网络模型生成自然语言句子来描述图像内容的方法。该方法提出的模型由卷积神经网络(Convolution Neural Network,CNN)和循环神经网络(Recurrent Neural Network,RNN)组成,其中,CNN用来提取输入图像的特征生成固定长度的特征向量,该特征向量初始化RNN来生成句子。在MSCOCO图像描述数据集上的实验结果表明了该模型所生成句子的语法准确性和语义准确性,且优于先前的基线模型。     

自调式镦压挤胀复合液压机的研制

从力学原理、设计原理、整机结构、关键零部件的设计和工作程序,系统地介绍了自调式镦压挤胀复合液压机．由于压机设计了顶出缸对下活动横梁调节限位结构,回程拉杆对上镦压横梁的复位结构及镦压缸和气液储能器之间的连通协调结构,这不仅使该液压机结构紧凑,同时节省了上镦压横梁的回程液压缸、下活动横梁的镦压缸,并简化了上凸模与上镦压模分设的液压系统,而且解决了直齿圆柱齿轮在塑性成形过程中齿顶难以充满、齿根易出现微裂纹,以及成形压力过大和模具寿命过低的问题．