Preparation and performance of a cold gas dynamic sprayed high-aluminum bronze coating

By mixing preheated high-aluminum bronze powders with different amounts of Al₂O₃ powder, a low-pressure cold-sprayed coating was prepared and sprayed onto a Cr12MoV steel substrate. The hardness of the coating and the bonding strength between the coating and the substrate were tested with a HV-1000 microhardness tester and a mechanical universal testing machine. The surface microstructure, cross-section and tensile fracture surface of the coating were observed with a scanning electron microscope (SEM). Correspondingly, the influences of the preheat treatment temperature of the bronze powder and the Al₂O₃ content on the coating performance were investigated. The results indicate that the hardness of bronze powders decreased and the coating deposition rate increased after the preheating treatment of the bronze powder. The Al₂O₃ content in the mixed powders contributed to the deformation of bronze powders during the spraying process. This trend resulted in varied performance of the coating.     

制动盘结构参数对温度场和应力场的影响研究

应用ABAQUS有限元分析软件,结合热-力耦合理论和传热学理论,模拟了在紧急制动下制动盘的温度场和热应力场分布,并研究了制动盘结构参数对温度场和应力场的影响.以现有厚度的制动盘为研究对象,运用单因子变量法,研究了制动盘厚度为9,11,12和13mm时对温度和应力的影响以及两种不同结构的通风孔对温度和应力的影响.结果表明:当厚度为13mm时,制动盘的最高温度降低了15.25%,最大应力降低了19.29%,与实心式结构的制动盘相比,夹层式结构通风孔的制动盘可使最高温度降低8.06%,最大应力降低30.67%,增大制动盘厚度可减小最高温度和最大应力;孔板式结构通风孔的制动盘表面温度较夹层式低,但应力较大,故夹层式结构通风孔的制动盘较孔板式结构通风孔的制动盘总体性能更优.     

南方地区局部地面供暖舒适性及节能性研究

采用环境测试、主观问卷和能耗模拟相结合的方式,研究冬季局部地面供暖方式下人体舒适性以及能耗情况.在14、16、18℃背景温度下的人工环境实验室内,测试了20位受试者的热感觉、热舒适、热可接受以及相应的局部地面供暖能耗.实验结果表明:在14℃时,使用局部地面供暖后受试者的舒适性显著提高,在16、18℃时,使用局部地面供暖能满足90%以上受试者舒适性要求且所需能耗很低.模拟结果表明:相比设定温度为20℃的空调系统能耗,采用局部地面供暖对西南、华东与华中地区节能效果明显,在华南地区节能率最高.因此,局部地面供暖可以作为一种适用于南方地区的提高舒适性和节能性的采暖方法.     

郑洛新国家自主创新示范区信息协同研究

在信息生态环境下,信息资源日益成为一种战略性资源。本文在郑洛新国家自主创新示范区背景下,运用信息协同视角分析对示范区发展的影响因素,并最终得出信息协同之于"郑洛新"的有益影响。文章最后以郑洛新示范区如何构建信息协同模式为总结,提出了同构管理信息系统、智能云平台建设、新型数据管理技术应用等相关建议。     

经济学实验课程设计的探索性研究

在经济学教学中引入实验方法是经济学教学手段改革的重要内容,开设经济学实验课程已成为经济学教学改革的必然。文中阐述了经济学实验内涵和意义,对经济学实验课程设计的过程和方法进行了分析。以完全信息静态博弈实验为例,对经济学实验课程的设计进行了探索,并明确指出经济学实验课程设计中应注意的问题。     

Effects of Cr and Mo elements on the microstructures and compressive properties of the in situ (TiC_xN_y–TiB_2)/Ni cermets

In-situ(TiC_xN_y–TiB_2)/Ni cermets with 70 wt%TiC_xN_y–TiB_2 were successfully fabricated by combustion synthesis and hot pressing sintering in Ni-Ti-B_4C-BN powder systems.The microstructures,density,compressive properties,and hardness of the TiC_xN_y–TiB_2/Ni cermets with the addition of 0–8 wt%Cr/Mo to the Ni-Ti-B_4C-BN powder systems were compared and analysed.The results showed that the ceramic particles distributed uniformly in the cermets,and the size of the ceramic particles reduced with the Cr/Mo addition.Both Cr and Mo addition can improve the hardness,compressive properties,and fracture strains of the cermets.The hardness,compressive strength,and fracture strain of the(TiC_xN_y–TiB_2)/(Ni+Cr)cermets increased from 1561 HV,2.94 GPa,and 2.9%to 1864 HV,3.65 GPa,and 3.4%,respectively when the Cr content increased to 5 wt%.The hardness and compressive strength of the(TiC_xN_y–TiB_2)/(Ni+Mo)cermets increased from 1561 HV and 2.94 GPa to 1902 HV and 3.43 GPa,respectively when the Mo content increased to 8 wt%.The cermets with Cr had better compressive properties than the cermets with Mo.     

Systemic Design for Applying the Combined Use of SSM and CDA to Social Practices

In this paper, we propose a framework for applying the combined use of soft systems methodology (SSM) and critical discourse analysis (CDA) based on social semiotic systemic functional linguistics to social practices. In the social practice, ‘participation’ mode of Checkland’s SSM is used for ‘problem-solving’ whilst CDA is used to problematize ‘problem-solving’ processes within the practice. During the meta-process of problematization of our research, we used Churchman’s systems approach and its theory of ‘boundary critique’ in order to explore issues such as governance, inequality of power, and social values within the organization examined for this study. In other words, the process-oriented methodology proposed in this paper consists of two processes: that of ‘problem-solving’ based on SSM and of problematization of naturalized discourse from the perspective of CDA and two phases of boundary critique in social practice. A detailed account of a case study of Korean social enterprise is given to demonstrate how our proposed framework of the combined use of SSM and CDA is applied into practice. Reflecting the outcome of the case study, this paper argues that critical social research from systemic inquiry using what we call ‘process-oriented methodology’ is useful to address some of the social and complex issues related to understanding dynamic relation between power and discourse amongst participants in the social enterprise in Korean contexts.     

三角网格模型五轴加工刀轴矢量调整及优化

为消除全局干涉,提出了一种基于K-D树及刀具离散的高效刀轴矢量调整算法.算法首先以有限个点离散表示刀具,然后利用K-D树快速查找刀具的可能干涉点,并在此基础上计算调整后的刀轴矢量.为避免过大的刀轴矢量突变,提出一种分角度区域方法优化刀轴矢量.实例验证表明:算法能够高效实现全局干涉避免及刀轴矢量优化.