Dialdehyde starch nanoparticles： Preparation and application in drub carrier

Dialdehyde starch nanoparticles (DASNP) were prepared by the redox reaction of NaIO4 and starch in water-in-oil microemulsion. IR spectrum showed that DASNP had aldehyde groups, and quantitative alkali consumption showed that its dialdehyde content was about (50±5)%. The average diameter of DASNP determined by SEM was about 100 nm. TGA-DTA showed that its thermal stability was better than starch nanoparticle (StNP) and dialdehyde starch (DAS). Its low biological toxicity was detected by cell experiment. Also the best mass ratio of doxorubicin (DOX) to combined DASNP detected by UV-VIS was 15 : 1, and the product was effective for controlled release of DOX. The cell experiment showed that the drug-carrier particle (DOX-DASNP) can release DOX for a long time and strengthened the effect of the anticancer drug. This work demonstrates that the DASNP, which has good thermal stability, small particle size, low biological toxicity, and slowly anticancer drug-releasing to strengthen drug effect, is a potentially useful carrier for anticancer drug.     

Variations in equilibrium line altitude of the Qiyi Glacier,Qilian Mountains,over the past 50 years

Based on observations of the equilibrium line altitude (ELA) of the Qiyi Glacier in the Qilian Mountain, we established a statistical model between ELA and its major influencing factors, warm season air temperature (air temperature averages for September, July and August) and cold season precipitation (total precipitation in the period January through March). Warm season air temperature was the leading climatic factor influencing ELA variations. The glacier ELA ascends (descends) 172 m when warm season air temperature increases (decreases) by 1°C, and ascends (descends) 62 m when cold season precipitation decreases (increases) by 10%. In the period 1958–2008, the glacier ELA showed a general increasing trend, ascending 230 m and reaching its highest altitude in 2006 at 5131 m a.s.l., close to the glacier summit. If future climate is similar to that in the period 2001–2008, the Qiyi Glacier will not stabilize until it retreats by 2.08 km.     

Formation mechanism of the graphite-rich protective layer in blast furnace hearths

A long campaign life of blast furnaces is heavily linked to the existence of a protective layer in their hearths. In this work, we conducted dissection studies and investigated damage in blast furnace hearths to estimate the formation mechanism of the protective layer. The results illustrate that a significant amount of graphite phase was trapped within the hearth protective layer. Furthermore, on the basis of the thermodynamic and kinetic calculations of the graphite precipitation process, a precipitation potential index related to the formation of the graphite-rich protective layer was proposed to characterize the formation ability of this layer. We determined that, under normal operating conditions, the precipitation of graphite phase from hot metal was thermodynamically possible. Among elements that exist in hot metal, C, Si, and P favor graphite precipitation, whereas Mn and Cr inhibit this process. Moreover, at the same hot-face temperature, an increase of carbon concentration in hot metal can shorten the precipitation time. Finally, the results suggest that measures such as reducing the hot-face temperature and increasing the degree of carbon saturation in hot metal are critically important to improve the precipitation potential index.     

Effect of slag composition on the cleanliness of 28MnCr5 gear steel in the refining processes

The equilibrium reaction between CaO—Al₂O₃—SiO₂—MgO slag and 28MnCr5 molten steel was calculated to obtain the suitable slag composition which is effective for decreasing the oxygen content in molten steel. The dissolved oxygen content [O] in molten steel under different top slag conditions was calculated using a thermodynamic model and was measured using an electromotive force method in slag–steel equilibrium experiments at 1873 K. The relations among [O], the total oxygen content (T.O), and the composition of the slag were investigated. The experimental results show that both [O] and T.O decrease with decreasing SiO₂ content of the slag and exhibit different trends with the changes in the CaO/Al₂O₃ mass ratio of the slag. Increasing the CaO/Al₂O₃ mass ratio results in a decrease in [O] and an increase in T.O. To ensure that T.O ≤ 20 ppm and [O] ≤ 10 ppm, the SiO₂ content should be controlled to <5wt%, and the CaO/Al₂O₃ mass ratio should be in the range from 1.2 to 1.6.     

Superior machinability of steel enhanced with BN and MnS particles

The strategy that replacing part of MnS with BN was proposed in order to decrease the sulfur content in sulfur based free-cutting steel. The effects of BN and MnS inclusions on the microstructure and machinability of the steel were systematically investigated. The results show that most of the BN and MnS inclusions exist individually in the steel and only a small amount of them are in a composite state forming either isolated particles or clusters of particles. In the case of multi-phased steel, the theoretical calculation predicts that the volume of large BN particles should be 0.7 times of the volume of large MnS particles. The machinability of this type of BN and MnS alloy steel over a wide range of cutting speeds ranging from a low speed appropriate for drilling to a high speed appropriate for turning is confirmed as being equal to or superior to that of an MnS reference steel, even though the sulfur content in the composite steel is only half that of the MnS steel. The aptitude for cutting effect of 240 ppm nitrogen and 115 ppm boron in the composite steel is demonstrated to be equivalent or even better than 1000 ppm sulfur in MnS free-cutting steel.     

Optimization of strand and final electromagnetic stirrers of round bloom casters with multiple sections

Strand electromagnetic stirring (S-EMS) and final electromagnetic stirring (F-EMS) are the main methods used to improve the center porosity and segregation for round blooms. To optimize the stirring conditions, nail shooting tests were conducted for three sections of large round blooms with diameters of ?380 mm, ?450 mm, and ?600 mm. Acid leaching and sulfur print tests were used to investigate the shell thickness. Based on the results of nail shooting tests, a mathematical model of solidification was established, and the variation of shell thickness and the central solid fraction were exactly calculated by the model. By taking all sections into account, the locations of S-EMS and F-EMS were optimized for each section. In the results, the macro-segregation of various sections is improved after the locations of S-EMS and F-EMS systems are changed.     

An anonymous authentication scheme withstanding the conspiracy attack

A novel anonymous authentication scheme is proposed based on the ring signature. In the scheme, the private key and the the freely chosen anonymity set are used to achieve anonymous authentication. In terms of the threshold sharing, a group of t members jointly implement threshold tracking. In order to improve the security of tracking, message recovery equation is used to verify and recover data leaked by the user. Compared with Liu et al’s scheme, the proposed scheme can resist conspiracy tracking and has less computational cost. On the premise of the discrete-logarithm-based assumption put forth by Lysyanskaya, Rivest, Sahai, and Wolf (LRSW) and Diffie-Hellman (DDH) assumption, the scheme is proved to meet the demands of anonymous authentication. The scheme has broad application prospects in many fields such as ad hoc network, electronic voting, and so on.     

Particle simulation of the failure process of brittle rock under triaxial compression

In order to investigate the failure process of brittle rock under triaxial compression through both experimental and numerical approaches, the particle simulation method was used in numerical simulations and the simulated results were compared with those of the experiment. The numerical simulation results, such as fracture propagation, microcrack distribution, stress-strain response, and damage patterns, were discussed in detail. The simulated results under various confining pressures (0–60 MPa) are in good agreement with the experimental results. The simulated results reveal that rock failure is caused by axial splitting under uniaxial compression. As the confining pressure increases, rock failure occurs in a few localized shear planes and the rock mechanical behavior is changed from brittle to ductile. Consequently, the peak failure strength, microcrack numbers, and the shear plane angle increase, but the ratio of tensile to shear microcracks decreases. The damage formation during the compression simulations indicates that the particle simulation method can produce similar behaviors as those observed through laboratory compression tests.     

Hydrogen-induced cracking behaviors of Incoloy alloy 825

The effect of hydrogen on the fracture behaviors of Incoloy alloy 825 was investigated by means of slow strain rate testing (SSRT). Hydrogen was introduced into the sample by electrochemical charging. The results show that surface microcracks form gradually during aging at room temperature when desorption of hydrogen takes place after hydrogen charging at a current density of 5 mA/cm2 for 24 h. SSRT shows that the increase of ductility loss is significantly obvious as the hydrogen charging current density increases. Scanning electron microscopy (SEM) images reveal ductile fracture in the pre-charged sample with low current densities, while the fracture includes small quasi-cleavage regions and tends to be brittle fracture as the hydrogen charging current density increases to 5 mA/cm2.     

Precipitation and stability of reversed austenite in 9Ni steel

A new method was used to analyze the factors affecting the precipitation of reversed austenite during tempering. The samples were kept at various tempering temperatures for 10 min and their length changes were recorded. Then, the precipitation of reversed austenite which led to the length reduction was shown by thermal expansion curves. The results show that the effects of process parameters on the precipitation of reversed austenite can be determined more accurately by this method than by X-ray diffraction. When the quenching and tempering process is adopted, both the lower quenching temperature and higher tempering temperature can promote the precipitation of reversed austenite during tempering; and when the quenching, lamellarizing, and tempering process is used, intercritical quenching is considered beneficial to the precipitation of reversed austenite in the subsequent tempering because of Ni segregation during holding at the intercritical temperature.