Uncertainty in crossing time of 2 °C warming threshold over China

The 2 °C warming target has been used widely in global and regional climate change research. Previous studies have shown large uncertainties in the time when surface air temperature (SAT) change over China will reach 2 °C relative to the pre-industrial era. To understand the uncertainties, we analyzed the projected SAT in the twenty-first century using 40 state-of-the-art climate models under two Representative Concentration Pathways (RCP4.5 and RCP8.5) from the Coupled Model Intercomparison Project Phase 5. The 2 °C threshold-crossing time (TCT) of SAT averaged across China was around 2033 and 2029 for RCP4.5 and RCP8.5, respectively. Considering a ±1σ range of intermodel SAT change, the upper and lower bounds of the 2 °C TCT could differ by about 25 years or even more. Uncertainty in the projected SAT and the warming rate around the TCT are the two main factors responsible for the TCT uncertainty. The former is determined by the climate sensitivity represented by the global mean surface temperature response. About 45 % of the intermodel variance of the projected 2 °C TCT for averaged SAT over China can be explained by climate sensitivity across the models, which is contributed mainly by central and southern China. In a climate more sensitive to CO₂ forcing, stronger greenhouse effect, less stratus cloud over the East Asian monsoon region, and less snow cover on the Tibetan Plateau result in increased downward longwave radiation, increased shortwave radiation, and decreased shortwave radiation reflected by the surface, respectively, all of which may advance the TCT.     

Effect of Y_2O_3 content in the pack mixtures on microstructure and oxidation resistance of B–Y modified silicide coating

B–Y modified silicide coatings were prepared on Nb–Si based alloy by pack cementation at 1300 ℃ for 10 h. The effect of Y_2O_3 content in the pack mixtures on microstructure and oxidation resistance of the coatings was investigated. The results show that the four coatings have similar structures, which possess a(Nb,X)Si_2 outer layer and a(Nb,X)_5Si_3 transitional layer. Y_2O_3 content in the pack mixtures has an obvious effect on the Si content in the coating. The mass gains of the coatings prepared with 0.5, 1, 2 and 3 wt% Y_2O_3 in pack mixtures are 2.33, 1.96, 2.05 and 2.86 mg/cm~2 after oxidation at 1250 ℃ for 100 h, respectively. The coating prepared with 1 wt% Y_2O_3 exhibits the best oxidation resistance due to the formation of a dense glass-like borosilicate scale.     

Giant magneto resistance and temperature coefficient of resistance in Sm0.55Sr0.30Ag0.15MnO3 perovskite

Silver ions substituted samarium strontium manganite (Sm0.55Sr0.30Ag0.15MnO3) pervoskite was synthesized by using respective oxides in stoichiometric ratio through solid state reaction. The as-prepared sample was characterized by various analytical techniques to confirm its formation and understand the effect of monovalent silver ions in pervoskite lattice. X-ray diffraction pattern confirms the single phase formation while grain morphology in SEM image indicates good connectivity among the grains. The enhancement in metal to insulator transition temperature shows quenched disorder and magnetoresistance phenomena. The magnetoresistance (MR) and temperature coefficient of resistance (TCR) emerge from grain growth factor and homogeneity induced by Ag+ ions in the lattice. The reduction in hysteresis loss resulted from antiferromagnetic - ferromagnetic (TN) and ferromagnetic - paramagnetic (Tc) transitions reveals the removal of disorder in perovskite lattice by Ag+ ions substitution. This increases the magnetic moment across distinct ions on the applying magnetic field. The rise in MR% (~99%) with silver doping emerging from smooth spin tunneling of the grains across the boundary and suppression of the disordered magnetic fluctuations with increase in magnetic field has been reported. The present compound exhibits the first order nature of magnetism and observed first time the highest value of TCR ~ 95%.     

The origin of spontaneous activity in the developing auditory system

Spontaneous activity in the developing auditory system is required for neuronal survival as well as the refinement and maintenance of tonotopic maps in the brain. However, the mechanisms responsible for initiating auditory nerve firing in the absence of sound have not been determined. Here we show that supporting cells in the developing rat cochlea spontaneously release ATP, which causes nearby inner hair cells to depolarize and release glutamate, triggering discrete bursts of action potentials in primary auditory neurons. This endogenous, ATP-mediated signalling synchronizes the output of neighbouring inner hair cells, which may help refine tonotopic maps in the brain. Spontaneous ATP-dependent signalling rapidly subsides after the onset of hearing, thereby preventing this experience-independent activity from interfering with accurate encoding of sound. These data indicate that supporting cells in the organ of Corti initiate electrical activity in auditory nerves before hearing, pointing to an essential role for peripheral, non-sensory cells in the development of central auditory pathways.     

TPP1 is a homologue of ciliate TEBP-beta and interacts with POT1 to recruit telomerase

Telomere dysfunction may result in chromosomal abnormalities, DNA damage responses, and even cancer. Early studies in lower organisms have helped to establish the crucial role of telomerase and telomeric proteins in maintaining telomere length and protecting telomere ends. In Oxytricha nova, telomere G-overhangs are protected by the TEBP-alpha/beta heterodimer. Human telomeres contain duplex telomeric repeats with 3' single-stranded G-overhangs, and may fold into a t-loop structure that helps to shield them from being recognized as DNA breaks. Additionally, the TEBP-alpha homologue, POT1, which binds telomeric single-stranded DNA (ssDNA), associates with multiple telomeric proteins (for example, TPP1, TIN2, TRF1, TRF2 and RAP1) to form the six-protein telosome/shelterin and other subcomplexes. These telomeric protein complexes in turn interact with diverse pathways to form the telomere interactome for telomere maintenance. However, the mechanisms by which the POT1-containing telosome communicates with telomerase to regulate telomeres remain to be elucidated. Here we demonstrate that TPP1 is a putative mammalian homologue of TEBP-beta and contains a predicted amino-terminal oligonucleotide/oligosaccharide binding (OB) fold. TPP1-POT1 association enhanced POT1 affinity for telomeric ssDNA. In addition, the TPP1 OB fold, as well as POT1-TPP1 binding, seemed critical for POT1-mediated telomere-length control and telomere-end protection in human cells. Disruption of POT1-TPP1 interaction by dominant negative TPP1 expression or RNA interference (RNAi) resulted in telomere-length alteration and DNA damage responses. Furthermore, we offer evidence that TPP1 associates with the telomerase in a TPP1-OB-fold-dependent manner, providing a physical link between telomerase and the telosome/shelterin complex. Our findings highlight the critical role of TPP1 in telomere maintenance, and support a yin-yang model in which TPP1 and POT1 function as a unit to protect human telomeres, by both positively and negatively regulating telomerase access to telomere DNA.     

供热设计方案综合评价与优选研究

多目标综合效果测度法是一种非常有效的系统优化评价方法。从方案的经济性、技术性及对环境的影响等角度,对5种供热方案进行分析,运用多目标综合效果测度法对备选方案进行评价,确定污水源热泵系统为最佳方案。     

电磁阻尼器性能参数试验研究

电磁阻尼器性能与多种因素有关,在电磁阻尼器基本性能试验研究基础上,制作了一个电磁阻尼器模型,进行了涡流板厚度参数影响的试验研究:做了3种厚度涡流板在不同频率、不同位移情况下的试验,得到了涡流板厚度对阻尼器性能影响的定性结论。     

粘土基防渗浆材的实验研究

针对目前常用浆材的局限性和工程应用的需要,采用正交优化的实验方法研究一种以粘土为主的粘土基防渗浆材,浆材具有良好的稳定性和可灌性,其结石体具有低渗透性和较低强度,适用于非加固型的防渗注浆工程。     

QY25起重机行星变速箱优化设计

根据产品要求,对起重机起升机构中的行星变速箱进行优化设计,主要对变速箱中的齿轮进行高度变位计算,从而达到减轻整机的重量和体积,合理地确定已有参数,以期达到最佳设计的目的。     

锂硫聚合物二次电池关键材料研究进展

报告了在复合型纳米硫正极材料、纳米储锂合金负极材料和用原位合成工艺掺入纳米二氧化硅的凝 胶型聚合物电解质的研制方面所取得的进展;所研制的复合型纳米硫正极材料与凝胶电解质及锂金属负极配合 制成扣式实验电池进行测试,容量已达到７００mAh桙g,发现该材料放电电压是现有锂钴氧材料放电电压的一半, 双电池串联可以与现有锂钴氧材料电池互换;采用微乳液新工艺合成的Cu－Sn纳米合金材料,以石墨与金属锡 复合的材料,以及以金属氧化物作为原料,采用乳液法制备碳微球镶嵌金属锡的球形复合材料等高容量负极材 料取得了较大的进展