Microbial degradation of bitumen

Summary A blown bitumen Mexphalte R 90/40 with a high content of saturated hydrocarbons was degraded by several microorganisms to the same extent. In batch cultures ofSaccharomycopsis lipolytica, maximal biodegradation was estimated to be about 9% w/w, 3.2·10^–3 g/cm² and 3.1·10^–3 cm of degraded bitumen. The Mexphalte R 90/40 degradation rate was closely coupled to biofilm formation. The microbial activity concerned predominantly the oxidation of saturated hydrocarbons. A direct distillation bitumen 80/100 with a low content of saturated hydrocarbons and a high content of aromatic hydrocarbons and resins was more resistant to biodegradation.     

Statecharts for Distributed Product Data Management System Modelling

Product data management (PDM) has been accepted as an important tool for the manufacturing industries. In recent years, more and mor e researches have been conducted in the development of PDM. Their research area s include system design, integration of object-oriented technology, data distri bution, collaborative and distributed manufacturing working environment, secur ity, and web-based integration. However, there are limitations on their rese arches. In particular, they cannot cater for PDM in dis...     

The detection of structural deformation errors in attitude determination

In the determination of the attitude parameters from a multi-antenna GPS array, one of the major assumptions is that the body frame is rigid at all times. If this assumption is not true then the derived attitude parameters will be in error. It is well known that in airborne platforms the wings often experience some displacement during flight, especially during periods of initializing maneouvres, such as taking off, landing,and banking. Often it is at these points in time that it is most critical to have the most precise attitude parameters.There are a number of techniques available for the detection of modeling errors.The CUSUM algorithm has successfully been implemented in the past to detect small persistent changes. In this paper the authors investigate different methods of generating the residuals, to be tested by the CUSUM algorithm, in an effort to determine which technique is best suited for the detection of structural deformation of an airborne platform. The methods investigated include monitoring the mean of the residuals generated from the difference between the known body frame coordinates, and those calculated from the derived attitude parameters. The generated residuals are then passed to a CUSUM algorithm to detect any small persistent changes. An alternative method involves transforming the generated residuals into the frequency domain through the use of the Fast Fourier Transform. The CUSUM algorithm is then used to detect any frequency changes. The final technique investigated involves transforming the generated residuals using the Haar wavelet. The wavelet coefficients are then monitored by the CUSUM algorithm in order to detect any significant change to the rigidity of the body frame.Detecting structural deformation, and quantifying the degree of deformation, during flight will ensure that these effects can be removed from the system, thus ensuring the most precise and reliable attitude parameter solutions. This paper, through a series ofsimulations, will assess the effectiveness of the above mentioned techniques for detecting structural deformation effects on a GPS multi-antenna array. These principles are then tested with experimental data.     

Effect of 15(R)-15-methyl-prostaglandin E2 on iron absorption in the rat

Summary The administration of 15(R)-15-methyl prostaglandin E₂ (15(R)-15-M-PGE₂) in vivo significantly diminished the uptake of⁵⁹Fe into blood, spleen, liver, femur and dried intestine of rats, whereas acetylsalicylic acid (ASA) increased the counts significantly. This effect of ASA was counteracted by 15(R)-15-M-PGE₂. It is suggested that prostaglandins (PGs) might play an important role in inhibiting iron absorption at the intestinal level.This work was supported by grant No.6638 from CONICET (Argentina). The technical assistance of Mrs María E. Castro and Norma Rizzo is gratefully acknowleged.     

砜基碳负离子的选择性环合反应

比较1，1－双（2－叔丁基砜乙基）十二烷基苯基砜（1）双碳负离子在不同条件下的环合反应结果，控制反应条件，在铁催化下可以生成偶联糁烯化的环烯产物（2）为主要产物；不加催化剂，加热回流反应得到分子内亲核取代反应产物环丙烷化合物（3）。     

The Study of the Grit-blasting Parameters and Their Effects on the Adhesive Strength of the Plasma Sprayed Coatings

Surface Preparation is very important in adhesive b on ding of spray coatings to the surface of a work piece. The common practice is gr it-blasting of the surface before subjecting it to the spray coating process. In this study, grit-blasting of an AISI 4130 steel (of different heat treatmen ts) with Al 2O 3 particles was studied. Various grit-blasting parameters such as blasting particle size, the distance between blasting nozzle and the work pi ece (25, 30 and 40 cm.), blasting pressure (3,4,5,6 and ...     

采用交流能源的低功耗DCVSL电路研究

从改变CMOS电路中能量转换模式的观点出发，研究利用渐变功率时钟的低功耗CMOS电路设计. 首先讨论钟控功率信号的代数表示及有关性质，然后归纳采用直流能源的互补CMOS逻辑门转化为采用交流能源的钟控CMOS门电路的设计过程. 在此基础上进一步提出采用交流能源的DCVSL电路设计. 采用正弦功率时钟的PSPICE模拟证实了钟控DCVSL电路具有正确的逻辑功能及低功耗工作的特点. 最后提出了一种将钟控信号转换为标准CMOS逻辑电平的接口电路并用计算机模拟验证了它的有效性.     

A study of macromolecular diffusion through native porcine mucus.

A diffusion chamber technique based on time-lag analysis for the estimation of effective diffusion coefficients of radiolabelled macromolecules of varying molecular weights through native mucus gel is reported. For all solutes studied, a reduction in effective diffusion coefficients was observed with a retardation of solute flux in both aqueous and mucus layers. Over the molecular weight range of solutes investigated (126-186,000 Daltons), a consistent effect of molecular weight was evident with regard to the retarding effect of mucus. No apparent or absolute molecular weight cut-off for macromolecular transfer was exhibited. However, at high molecular weights (greater than 30,000 Daltons) the retardation was greatly enhanced. The results confirm that mucus can be regarded as a gel with finite pores, but that it does not constitute an absolute barrier to even high molecular weight solutes.     

Ruin Probability with Variable Premium Rate and Disturbed by Diffusion in a Markovian Environment

We consider a risk model with a premium rate which varies with the level of free reserves. In this model, the occurrence of claims is described by a Cox process with Markov intensity process, and the influence of stochastic factors is considered by adding a diffusion process. The integro-differential equation for the ruin probability is derived by a infinitesimal method.     

Newton's Easy Quadratures ``Omitted for the Sake of Brevity'

In the 1687 Principia, Newton gave a solution to the direct problem (given the orbit and center of force, find the central force) for a conic-section with a focal center of force (answer: a reciprocal square force) and for a spiral orbit with a polar center of force (answer: a reciprocal cube force). He did not, however, give solutions for the two corresponding inverse problems (given the force and center of force, find the orbit). He gave a cryptic solution to the inverse problem of a reciprocal cube force, but offered no solution for the reciprocal square force. Some take this omission as an indication that Newton could not solve the reciprocal square, for, they ask, why else would he not select this important problem? Others claim that ``it is child's play' for him, as evidenced by his 1671 catalogue of quadratures (tables of integrals). The answer to that question is obscured for all who attempt to work through Newton's published solution of the reciprocal cube force because it is done in the synthetic geometric style of the 1687 Principia rather than in the analytic algebraic style that Newton employed until 1671. In response to a request from David Gregory in 1694, however, Newton produced an analytic version of the body of the proof, but one which still had a geometric conclusion. Newton's charge is to find both ``the orbit' and ``the time in orbit.' In the determination of the dependence of the time on orbital position, t(r), Newton evaluated an integral of the form ∫dx/x <sup>n</sup> to calculate a finite algebraic equation for the area swept out as a function of the radius, but he did not write out the analytic expression for time t = t(r), even though he knew that the time t is proportional to that area. In the determination of the orbit, θ (r), Newton obtained an integral of the form ∫dx/√(1−x<sup>2</sup>) for the area that is proportional to the angle θ, an integral he had shown in his 1669 On Analysis by Infinite Equations to be equal to the arcsin(x). Since the solution must therefore contain a transcendental function, he knew that a finite algebraic solution for θ=θ(r) did not exist for ``the orbit' as it had for ``the time in orbit.' In contrast to these two solutions for the inverse cube force, however, it is not possible in the inverse square solution to generate a finite algebraic expression for either ``the orbit' or ``the time in orbit.' In fact, in Lemma 28, Newton offers a demonstration that the area of an ellipse cannot be given by a finite equation. I claim that the limitation of Lemma 28 forces Newton to reject the inverse square force as an example and to choose instead the reciprocal cube force as his example in Proposition 41. (Received August 14, 2002) Published online March 26, 2003 Communicated by G. Smith