Ion-solvent interaction from viscosity,apparent molar volume and conductivity data of bromates,iodates and sulphates of potassium and sodium in dioxane-water mixtures at different temperatures

Summary The viscosity, apparent molar volume and conductivity of KBrO₃, NaBrO₃, KIO₃, NaIO₃, K₂SO₄ and Na₂SO₄ at mass fraction of dioxane (10, 20 and 30%) — water mixtures at 30–45°C±0.01°C have been measured. The ions appear to interact and the ion-solvent interaction is of the order BrO ₃ ^– >IO ₃ ^– >SO ₄ ^2– .     

In vitro modulation of rat adipocyte ghost membrane fluidity by cholesterol oxysterols

The effects of cholesterol and cholesterol-derived oxysterols (cholestanone, cholestenone, coprostanone and epicoprostanol) on adipocyte ghost membrane fluidity were studied using a fluorescence depolarization method. The fluorescence anisotropy of the treated membranes was determined using 1,6-diphenyl-1,3,5-hexatriene (DPH) and 1-(4-trimethylammoniumphenyl)-6-phenyl-1,3,5-hexatriene (TMA-DPH). Cholestanone and cholesterol decreased membranes fluidity at both the concentrations tested (10 & 50 M) while the rest of the sterols did not exert any significant effect on membrane fluidity. In the presence of epinephrine, cholestanone partitioned more towards the lipid core but cholesterol partitioning was not affected. The fusion activation energies (E) obtained for membranes preincubated with cholestanone (8.6 kcal/mol) and cholesterol (8.2 kcal/mol) were not significantly different from that of untreated membranes (8.3 kcal/mol). Membranes preincubated with cholestanone and cholesterol did not exhibit any change in lipid phase throughout the temperature range (10–45°C) tested. The sterols were found to inhibit fisetin-induced phospholipid methylation in isolated rat adipocytes in the rank order of cholesterol > epicoprostanol > cholestanone=cholestenone=coprostanone, while basal methylations was unaffected. When adipocytes were preincubated with the sterols before the addition of fisetin, cholestanone and cholestenone showed 74% and 66% inhibition of maximal methylation respectively. These results indicated that cholesterol oxysterols interact differently with rat adipocyte membranes, with cholestanone interacting more with phospholipids located at the inner lipid bilayer (e.g. phosphatidylethanolamine) while cholesterol interacts more with phosphatidylcholine located at the outer lipid bilayer. This differential interaction may cause selective changes in membrane fluidity at different depths of the bilayer and thus may modulate the activities of membrane-bound proteins such as enzymes and receptors.     

Microstructure studies of air-plasma-spray-deposited CoNiCrAlY coatings before and after thermal cyclic loading for high-temperature application

In the present study, bond-coats for thermal barrier coatings were deposited via air plasma spraying (APS) techniques onto Inconel 800 and Hastelloy C-276 alloy substrates. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and atomic force microscopy (AFM) were used to investigate the phases and microstructure of the as-sprayed, APS-deposited CoNiCrAlY bond-coatings. The aim of this work was to study the suitability of the bond-coat materials for high temperature applications. Confirmation of nanoscale grains of the γ/γ′-phase was obtained by TEM, high-resolution TEM, and AFM. We concluded that these changes result from the plastic deformation of the bond-coat during the deposition, resulting in CoNiCrAlY bond-coatings with excellent thermal cyclic resistance suitable for use in high-temperature applications. Cyclic oxidative stability was observed to also depend on the underlying metallic alloy substrate.     

Effects of doping in 25-atom bimetallic nanocluster catalysts for carbon–carbon coupling reaction of iodoanisole and phenylacetylene

A trio of thiolate-protected atomically precise gold nanoclusters, [Au_(23)(S-c-C_6H_(11))_(16)]~–, Au24(SCH_2pH~tBu)_(20)and [Au_(25)(SCH_2CH_2pH)_~(18)]~–, are utilized as catalysts for 4-nitrophenol(4-NP) reduction to 4-aminophenol(4-AP).Despite nearly identical sizes(~1 nm), the three nanoclusters possess distinctly different atomic packing structures and surface ligand binding modes, which contribute to different catalytic performance. The [Au_(23)(Sc-C_6H_(11))_(16)]~–nanocluster shows the highest activity with a kinetic rate constant of 0.0370 s~(-1), which is higher than those of Au24(SCH_2pH~tBu)_(20)(0.0090 s~(-1)) and [Au_(25)(SCH_2CH_2pH)_~(18)]~–(0.0242 s~(-1)). Such a trio of gold nanoclusters indicate that the atomic packing mode and electronic structure play a crucial role in determining their catalytic performance.     

Improved molecular replacement by density- and energy-guided protein structure optimization

Molecular replacement procedures, which search for placements of a starting model within the crystallographic unit cell that best account for the measured diffraction amplitudes, followed by automatic chain tracing methods, have allowed the rapid solution of large numbers of protein crystal structures. Despite extensive work, molecular replacement or the subsequent rebuilding usually fail with more divergent starting models based on remote homologues with less than 30% sequence identity. Here we show that this limitation can be substantially reduced by combining algorithms for protein structure modelling with those developed for crystallographic structure determination. An approach integrating Rosetta structure modelling with Autobuild chain tracing yielded high-resolution structures for 8 of 13 X-ray diffraction data sets that could not be solved in the laboratories of expert crystallographers and that remained unsolved after application of an extensive array of alternative approaches. We estimate that the new method should allow rapid structure determination without experimental phase information for over half the cases where current methods fail, given diffraction data sets of better than 3.2?? resolution, four or fewer copies in the asymmetric unit, and the availability of structures of homologous proteins with >20% sequence identity.     

Programmable nanowire circuits for nanoprocessors

A nanoprocessor constructed from intrinsically nanometre-scale building blocks is an essential component for controlling memory, nanosensors and other functions proposed for nanosystems assembled from the bottom up. Important steps towards this goal over the past fifteen years include the realization of simple logic gates with individually assembled semiconductor nanowires and carbon nanotubes, but with only 16 devices or fewer and a single function for each circuit. Recently, logic circuits also have been demonstrated that use two or three elements of a one-dimensional memristor array, although such passive devices without gain are difficult to cascade. These circuits fall short of the requirements for a scalable, multifunctional nanoprocessor owing to challenges in materials, assembly and architecture on the nanoscale. Here we describe the design, fabrication and use of programmable and scalable logic tiles for nanoprocessors that surmount these hurdles. The tiles were built from programmable, non-volatile nanowire transistor arrays. Ge/Si core/shell nanowires coupled to designed dielectric shells yielded single-nanowire, non-volatile field-effect transistors (FETs) with uniform, programmable threshold voltages and the capability to drive cascaded elements. We developed an architecture to integrate the programmable nanowire FETs and define a logic tile consisting of two interconnected arrays with 496 functional configurable FET nodes in an area of ～960 μm(2). The logic tile was programmed and operated first as a full adder with a maximal voltage gain of ten and input-output voltage matching. Then we showed that the same logic tile can be reprogrammed and used to demonstrate full-subtractor, multiplexer, demultiplexer and clocked D-latch functions. These results represent a significant advance in the complexity and functionality of nanoelectronic circuits built from the bottom up with a tiled architecture that could be cascaded to realize fully integrated nanoprocessors with computing, memory and addressing capabilities.     

Corrosion behavior of ultrafine-grained AA2024 aluminum alloy produced by cryorolling

The objectives of this study were to produce ultrafine-grained (UFG) AA2024 aluminum alloy by cryorolling followed by aging and to evaluate its corrosion behavior. Solutionized samples were cryorolled to ~85% reduction in thickness. Subsequent aging resulted in a UFG structure with finer precipitates of Al₂CuMg in the cryorolled alloy. The (1) solutionized and (2) solutionized and cryorolled samples were uniformly aged at 160℃/24 h and were designated as CGPA and CRPA, respectively; these samples were subsequently subjected to corrosion studies. Potentiodynamic polarization studies in 3.5wt% NaCl solution indicated an increase in corrosion potential and a decrease in corrosion current density for CRPA compared to CGPA. In the case of CRPA, electrochemical impedance spectroscopic studies indicated the presence of two complex passive oxide layers with a higher charge transfer resistance and lower mass loss during intergranular corrosion tests. The improved corrosion resistance of CRPA was mainly attributed to its UFG structure, uniform distribution of fine precipitates, and absence of coarse grain-boundary precipitation and associated precipitate-free zones as compared with the CGPA alloy.     

基于循环血微小RNA预测心脏再同步化治疗疗效

心力衰竭是一类严重危害人类健康的重大疾病, 心脏再同步化是一种治疗心室收缩不同步的心力衰竭患者的疗法, 但并不是所有的患者都可以获益. 因此, 发掘可以预测心脏再同步化治疗反应性的生物标记物具有重大意义. 微小RNA 可以稳定地存在于循环血中, 反映各种疾病状态, 而本研究组的研究发现通过循环血微小RNA-30d 的高表达可以预测心脏再同步化治疗的反应性, 具有一定的应用前景.     

Optimization of flotation variables for the recovery of hematite particles from BHQ ore

The technology for beneficiation of banded iron ores containing low iron value is a challenging task due to increasing demand of quality iron ore in India. A flotation process has been developed to treat one such ore, namely banded hematite quartzite (BHQ) containing 41.8wt% Fe and 41.5wt% SiO₂, by using oleic acid, methyl isobutyl carbinol (MIBC), and sodium silicate as the collector, frother, and dispersant, respectively. The relative effects of these variables have been evaluated in half-normal plots and Pareto charts using central composite rotatable design. A quadratic response model has been developed for both Fe grade and recovery and optimized within the experimental range. The optimum reagent dosages are found to be as follows: collector concentration of 243.58 g/t, dispersant concentration of 195.67 g/t, pH 8.69, and conditioning time of 4.8 min to achieve the maximum Fe grade of 64.25% with 67.33% recovery. The predictions of the model with regard to iron grade and recovery are in good agreement with the experimental results.