低捻转杯纺纱实验与理论分析--提高低捻转杯纱强力探索

研究在转杯纺加捻区中加装阻扭件,然后选用相同的棉条纺制不同捻系数的转杯纱(加装阻扭件和不加装阻扭件)和环锭纱,并测试其成纱的强伸性能、表面形态和扭转性能.测试结果表明,加装阻扭件的转杯纱可以适当改善转杯纺的加捻效果,进而适当提高了转杯纱的成纱强力.     

Treatment of PC-3 cells with ultrasound combined with microbubbles induces distinct alterations in the expression of Bcl-2 and Bax

The objective of the present study was to investigate whether ultrasound combined with microbubbles induces apoptotic cell death in androgen-independent prostate cancer cells and to identify the probable mechanism. We used ultrasound in continuous wave mode with a frequency of 21 kHz and a spatial-average temporal-average intensity of 46 mW/cm². Ultrasound combined with microbubbles (200 μL SonoVue?) was used to treat androgen-independent human prostate cancer PC-3 cells for 30 s. PC-3 cells were divided into three groups: the control group, the ultrasound group and the ultrasound combined with microbubbles group. Immediately after treatment, trypan blue exclusion was used to assess cell viability. Cell apoptosis at 24 h after treatment was measured using transmission electron microscopy and flow cytometry. Western blotting was used to evaluate the expression of the apoptosis-related proteins, Bcl-2 and Bax. Ultrasound combined with microbubbles had a minimal effect on the viability of PC-3 cells and induced minimal levels of cell lysis. The level of apoptosis in PC-3 cells induced by this modality was significantly higher than in controls (12.77 ± 0.31% vs. 2.56 ± 0.22%, P<0.01). Treatment with ultrasound combined with microbubbles increased the expression of Bax, a pro-apoptotic protein, and decreased the expression of Bcl-2, an anti-apoptotic protein. It was concluded that ultrasound combined with microbubbles induces apoptotic cell death in human prostate cancer PC-3 cells through down-regulation of Bcl-2 and up-regulation of Bax.     

基于坐标逻辑的形态图像处理器的硬件实现

在阐述坐标逻辑运算的基础上,论述了基于坐标逻辑形态学硬件实现的图像处理系统,该系统采用DSP FPGA的框架结构,利用FPGA的可重构特性将其中一片FPGA作为协处理器可以实现不同的图像处理功能,将坐标逻辑和传统形态学硬件实现的形态图像处理器在处理效果和速度两个方面作了比较,算法在FPGA芯片上的高速实现特征使数学形态学在图像实时处理领域的应用成为可能。     

求解最小覆盖问题的快速近似算法的进一步研究

分析了已有求覆盖平面上给定的若干个点的尽可能小的圆的问题的算法。给出了一个新的求解最小覆盖问题的算法，其计算时间复杂度为平面上给定的点数量的线性函数，该算法已编程实现，通过几万例随机算例的实际计算比较，表明算法所得结果的平均精度比已有的各种快速近似算法所得的精度要高，而且具体每例所需的计算时间均比已有快速近似算法对应的计算时间要短。     

同轴式水下局部干法TIG电弧焊接

本文主要介绍同轴式水下局部干法TIG电弧焊工艺及装置。其装置特点是能够轴向直接观察电弧和熔池状态,从而便于控制焊接过程,保证焊缝的对中性。试验结果表明:采用此装置能较好地解决湿法焊接时可见度差。焊缝含氢量高,冷却速度快等问题。焊缝的机械性能指标达到有关海上结构规程所提出的要求。     

Si基片各向异性腐蚀特性研究

为了制备高性能铁电薄膜红外探测器 ,对Si微桥的湿化学腐蚀工艺进行了研究 .利用Si基片各向异性腐蚀特性 ,在四甲基氢氧化铵 (简称TMAH )水溶液中加入氢氧化钾 (KOH)作为各向异性腐蚀液 (简称KTMAH) ,研究了TMAH与KOH摩尔比、腐蚀浓度、腐蚀温度对Si基片腐蚀特性的影响 .结果表明 :Si(1 0 0 )面的腐蚀速度随着腐蚀液浓度和温度的升高而增大 ,随着TMAH与KOH摩尔比的降低 ,KTMAH腐蚀液对掩膜层的腐蚀程度加剧 .选用 5 g/L的过硫酸盐 (PDS)与TMAH质量分数为 2 5 %、TMAH与KOH摩尔比为2的KTMAH混合液作为腐蚀液 ,并在 80℃× 2 .5h的腐蚀条件下能得到平整的腐蚀面 ,可以制备质量较好的微桥结构     

报高率确定决策事例的检索、匹配与调整

分析报高率决策事件的特征，提出了报高率确定决策事例的层次结构表示方法，研究了事例的组织与管理模式；对报高率确定决策事例的相似性进行了研究，提出了用贴近度表示报高率确定决策事例的相似度，利用灰色系统的预测理论，提出了一种报高率确定决策事例的调整模型。     

基于单调链的平面型腔行切加工轨迹生成算法

针对平面型腔行切加工刀具轨迹生成中如何合理而最大程度地减少在加工刀具轨迹中产生的跳刀动作的次数，提出了一种基于单调链技术的行切刀具轨迹生成算法，从而使对给定平面型腔而产生的行切刀具轨迹最大程度地减少了跳刀动作的次数，而且针对给定的复杂平面型腔，该算法可以预先分析出可能产生的最大跳刀次数，这一算法已在实际开发的CAM系统中成功实现。     

标量FDTD法分析渐变折射率光波导模场分布

用标量时域有限差分法（Finite-differece Time-domain Method,FDTD法）分析了渐变折射率平面光波导中基模的模场分布情况，采用平面光波、球面光波、高斯光波等5种不同形态的光波激励同一波导，借助计算机进行数值求解，得到的光场分布图在光场传播达到稳定后完全相同，说明波导的模式与光波形态无关，只与波导结构和光波波长有关，结果表明该方法直观、精确、快速，并与解析法分析的结果一致。     

Observation of rare-earth segregation in silicon nitride ceramics at subnanometre dimensions

Silicon nitride (Si3N4) ceramics are used in numerous applications because of their superior mechanical properties. Their intrinsically brittle nature is a critical issue, but can be overcome by introducing whisker-like microstructural features. However, the formation of such anisotropic grains is very sensitive to the type of cations used as the sintering additives. Understanding the origin of dopant effects, central to the design of high-performance Si3N4 ceramics, has been sought for many years. Here we show direct images of dopant atoms (La) within the nanometre-scale intergranular amorphous films typically found at grain boundaries, using aberration corrected Z-contrast scanning transmission electron microscopy. It is clearly shown that the La atoms preferentially segregate to the amorphous/crystal interfaces. First-principles calculations confirm the strong preference of La for the crystalline surfaces, which is essential for forming elongated grains and a toughened microstructure. Whereas principles of micrometre-scale structural design are currently used to improve the mechanical properties of ceramics, this work represents a step towards the atomic-level structural engineering required for the next generation of ceramics.