RNA interference-mediated inhibition of Hepatitis B Virus replication

Persistent and recurrent infection of hepatitis B virus (HBV) represents one of the most common and severe viral infections of humans, and has caused a formidable health problem in the affected countries. Currently used antiviral drugs have a very limited success on controlling HBV replication and infection. RNA interference (RNAi), a process by which double-stranded RNA (dsRNA) directs sequence-specific degradation of target mRNA in mammalian and plant cells, has recently been used to knockdown gene expression in various species. In this study, we sought to determine whether RNAi-mediated silencing of HBV viral gene expression could lead to the effective inhibition of HBV replication. We first developed RNAi vectors that expressed small interfering RNA (siRNA) and targeted the HBV core or surface gene sequence. Our results demonstrated that these specific siRNAs efficiently reduced the levels of corresponding viral RNAs and proteins, and thus suppressed viral replication. Treatment with siRNA gave the greatest reduction in the levels of HBsAg (92%) and in HBeAg (85%) respectively in the cultured cell medium. Our findings further demonstrated that the RNAi-mediated antiviral effect was sequence-specific and dose-dependent. Therefore, our findings strongly suggest that RNAi-mediated silencing of HBV viral genes could effectively inhibit the replication of HBV, hence RNAi-based strategy should be further explored as a more efficacious antiviral therapy of HBV infection.     

Cupric ion release and cytotoxicity for Yuangong Cu-IUDs and the release behavior of indomethacin for medicated 220 Cu-IUD

These years Yuangong copper-bearing intrauterine devices （Cu-IUDs） have been used because of less side effects in use. The corrosion of copper is essential to the success of contraception, and the release behavior of indomethacin from medicated Cu-IUD is related to its therapeutic effect. In this study, analytical methods were established to investigate the release behavior of cupric ion of three kinds of Yuangong Cu-IUDs and indomethacin of medicated Yuangong 220 Cu-IUD. Cu-IUDs were incubated in simulated uterine solution （SUS）. The concentrations of cupric ion and indomethacin were analyzed by flame atomic absorption spectrometer （FAAS） for 60 days and UV/vis -3310 spectrophotometer for 60 days, respectively. The morphology of copper after corrosion was characterized by SEM. In addition, we detected cytotoxicity by MTT of L929 mouse fibroblasts cells caused by extracts of the three Yuangong Cu-IUDs. The release behavior of cupric ion for three kinds of Yuangong Cu-IUDs was biphasic, which consisted of the initial burst release and then slow and constant release. In vitro release experiment confirmed a biphasic release of indomethacin from Yuangong 220. The copper wire of Yuangong Cu-IUDs showed uneven corrosion. The RGR value of Yuangong 365 Cu-IUD was smaller than that of medicated Yuangong 220 Cu-IUD and RGR value of medicated Yuangong 220 Cu-IUD was smaller than that of Yuangong 300 Cu-IUD. The cupric ion release and indomethacin release showed biphasic. Indomethacin increased the cupric ion release rate and might diminish the adverse effects caused by burst release of cupric ion. The toxicity grade of these three Yuangong Cu-IUDs was 4. We should canvass the adverse events of Cu-lUDs based on practical experiments, and try our best to reduce the toxicity of Cu-lUDs.     

A forensic method for efficient file extraction in HDFS based on three-level mapping

The large scale and distribution of cloud computing storage have become the major challenges in cloud forensics for file extraction. Current disk forensic methods do not adapt to cloud computing well and the forensic research on distributed file system is inadequate. To address the forensic problems, this paper uses the Hadoop distributed file system (HDFS) as a case study and proposes a forensic method for efficient file extraction based on three-level (3L) mapping. First, HDFS is analyzed from overall architecture to local file system. Second, the 3L mapping of an HDFS file from HDFS namespace to data blocks on local file system is established and a recovery method for deleted files based on 3L mapping is presented. Third, a multi-node Hadoop framework via Xen virtualization platform is set up to test the performance of the method. The results indicate that the proposed method could succeed in efficient location of large files stored across data nodes, make selective image of disk data and get high recovery rate of deleted files.     

Microstructural characteristics and mechanical properties of bobbin-tool friction stir welded 2024-T3 aluminum alloy

Cold-rolled 2024-T3 sheet alloy was subjected to bobbin-tool friction stir welding (BTFSW). The microstructural characteristics and mechanical properties of the nugget zone in the as-welded state were investigated. The results show that the equiaxed grain size of BTFSW 2024-T3 alloy decreases from 7.6 to 2.8 μm as the welding speed is increased from 80 to 120 mm/min; in addition, fine grains are generated in the nugget zone and the size distribution is non-uniform. All Al₂CuMg (S') precipitates dissolve into the Al matrix, whereas Mn-rich phases confirmed as T phases (Al₂₀Cu₂Mn₃, Al₆Mn, or Al₃Mn) remain unchanged. The optimized parameters for BTFSW are verified as the rotation speed of 350 r/min and the travel speed of 100 mm/min. The variations in precipitation and dislocation play more important roles than grain size in the nugget zone with respect to influencing the mechanical properties during the BTFSW process. After the BTFSW process, the fracture mode of base material 2024-T3 alloy transforms from ductile rupture to ductile-brittle mixed fracture.     

Effect of slag composition on the cleanliness of 28MnCr5 gear steel in the refining processes

The equilibrium reaction between CaO—Al₂O₃—SiO₂—MgO slag and 28MnCr5 molten steel was calculated to obtain the suitable slag composition which is effective for decreasing the oxygen content in molten steel. The dissolved oxygen content [O] in molten steel under different top slag conditions was calculated using a thermodynamic model and was measured using an electromotive force method in slag–steel equilibrium experiments at 1873 K. The relations among [O], the total oxygen content (T.O), and the composition of the slag were investigated. The experimental results show that both [O] and T.O decrease with decreasing SiO₂ content of the slag and exhibit different trends with the changes in the CaO/Al₂O₃ mass ratio of the slag. Increasing the CaO/Al₂O₃ mass ratio results in a decrease in [O] and an increase in T.O. To ensure that T.O ≤ 20 ppm and [O] ≤ 10 ppm, the SiO₂ content should be controlled to <5wt%, and the CaO/Al₂O₃ mass ratio should be in the range from 1.2 to 1.6.     

Analysis of the formation conditions and characteristics of interphase and random vanadium precipitation in a low-carbon steel during isothermal heat treatment

The characteristics of nanosized precipitates in steels depend on the heat-treatment parameters. The effects of characteristics of vanadium precipitates formed during isothermal heat treatment on the hardness of the ferrite matrix in low-carbon vanadium-alloyed steel were investigated through analysis of transmission electron microscopy images and microhardness measurements. The results show that, during isothermal holding in the temperature range from 675 to 750℃, only interphase precipitation occurs, whereas only random precipitation occurs in the ferrite matrix during holding at 600℃. Furthermore, during isothermal heat treatment between 600 and 675℃, both random and interphase precipitates occurred in the ferrite. Nanoscale vanadium carbides with different atomic ratios of vanadium (V) and carbon (C) were the dominant precipitates in the random and interphase precipitates. The sizes of random precipitation carbides were smaller than those of interphase ones. Also, the sample isothermally heat treated at 650℃ for 900 s exhibited a higher hardness with a narrower hardness distribution.     

The quest for the size of the universe in early relativistic cosmology (1917–1930)

Before the discovery of the expanding universe, one of the challenges faced in early relativistic cosmology was the determination of the finite and constant curvature radius of space-time by using astronomical observations. Great interest in this specific question was shown by de Sitter, Silberstein, and Lundmark. Their ideas and methods for measuring the cosmic curvature radius, at that time interpreted as equivalent to the size of the universe, contributed to the development of the empirical approach to relativistic cosmology. Their works are a noteworthy example of the efforts made by modern cosmologists toward the understanding of the universe as a whole, its properties, and its content.     

Protein arginine deiminase 4: a target for an epigenetic cancer therapy

The recent approvals of anticancer therapeutic agents targeting the histone deacetylases and DNA methyltransferases have highlighted the important role that epigenetics plays in human diseases, and suggested that the factors controlling gene expression are novel drug targets. Protein arginine deiminase 4 (PAD4) is one such target because its effects on gene expression parallel those observed for the histone deacetylases. We demonstrated that F- and Cl-amidine, two potent PAD4 inhibitors, display micromolar cytotoxic effects towards several cancerous cell lines (HL-60, MCF7 and HT-29); no effect was observed in noncancerous lines (NIH 3T3 and HL-60 granulocytes). These compounds also induced the differentiation of HL-60 and HT29 cells. Finally, these compounds synergistically potentiated the cell killing effects of doxorubicin. Taken together, these findings suggest PAD4 inhibition as a novel epigenetic approach for the treatment of cancer, and suggest that F- and Cl-amidine are candidate therapeutic agents for this disease.     

Identification of a bacterial inhibitor against g-type lysozyme

Lysozymes are antibacterial effectors of the innate immune system in animals that hydrolyze peptidoglycan. Bacteria have evolved protective mechanisms that contribute to lysozyme tolerance such as the production of lysozyme inhibitors, but only inhibitors of chicken (c-) and invertebrate (i-) type lysozyme have been identified. We here report the discovery of a novel Escherichia coli inhibitor specific for goose (g-) type lysozymes, which we designate PliG (periplasmic lysozyme inhibitor of g-type lysozyme). Although it does not inhibit c- or i-type lysozymes, PliG shares a structural sequence motif with the previously described PliI and MliC/PliC lysozyme inhibitor families, suggesting a common ancestry and mode of action. Deletion of pliG increased the sensitivity of E. coli to g-type lysozyme. The existence of inhibitors against all major types of animal lysozyme and their contribution to lysozyme tolerance suggest that lysozyme inhibitors may play a role in bacterial interactions with animal hosts.     

Kinetic and structural evidence of the alkenal/one reductase specificity of human ζ-crystallin

Human ζ-crystallin is a Zn²⁺-lacking medium-chain dehydrogenase/reductase (MDR) included in the quinone oxidoreductase (QOR) family because of its activity with quinones. In the present work a novel enzymatic activity was characterized: the double bond α,β-hydrogenation of medium-chain 2-alkenals and 3-alkenones. The enzyme is especially active with lipid peroxidation products such as 4-hydroxyhexenal, and a role in their detoxification is discussed. This specificity is novel in the QOR family, and it is similar to that described in the distantly related alkenal/one reductase family. Moreover, we report the X-ray structure of ζ-crystallin, which represents the first structure solved for a tetrameric Zn²⁺-lacking MDR, and which allowed the identification of the active-site lining residues. Docking simulations suggest a role for Tyr53 and Tyr59 in catalysis. The kinetics of Tyr53Phe and Tyr59Phe mutants support the implication of Tyr53 in binding/catalysis of alkenal/one substrates, while Tyr59 is involved in the recognition of 4-OH-alkenals.