长征精神对实现中国梦的启示

在新时代,长征精神启示我们,实现中华民族伟大复兴的中国梦,必须有坚定的理想信念,坚持党的绝对领导,坚持独立自主、实事求是、一切从实际出发的思想路线和群众路线,弘扬团结友爱协作和艰苦奋斗精神,只有继承和弘扬长征精神,我们的事业才会更加兴旺,我们的社会才会更加和谐,伟大的民族精神才能世代相传,发扬光大,实现中华民族伟大复兴的中国梦。     

Constructal entransy optimizations for insulation layer of steel rolling reheating furnace wall with convective and radiative boundary conditions

Based on the entransy dissipation extremum principle for thermal insulation process, the constructal optimizations for a plane insulation layer of the steel rolling reheating furnace wall with convective and radiative boundary conditions are carried out by taking the minimization of entransy dissipation rate as optimization objective. The optimal construct of the plane insulation layer is obtained. The results show that for the convective heat transfer boundary condition, the optimal constructs of the insulation layer obtained based on the minimizations of the entransy dissipation rate and heat loss rate are obvi- ously different. Comparing the optimal construct obtained based on the minimization of the entransy dissipation rate with that based on the minimization of the heat loss rate, the entransy dissipation rate is reduced by 5.98 %, which makes the global thermal insulation performance of the insulation layer improve. For the combined convective and radiative heat transfer boundary condition, compared the insulation layer having an increasing thickness with that having constant thickness and a decreasing thickness, the entransy dissipation rates are reduced by 16.59 % and 39.72 %, respectively, and the global thermal insulation performance of the insulation layer is greatly improved.There exits an optimal constant coefficient α2,opt which leads to the minimum dimensionless entransy dissipation rate of the insulation layer. The difference between the optimal constant coefficients α2,opt obtained based on the minimizations of the entransy dissipation rate and the maximum temperature gradient of the insulation layer is small. This makes the corresponding thermal stress obtained based on the minimum dimensionless entransy dissipation rate also be small, and the global thermal insulation performance and thermal safety of the insulation layer are improved simultaneously. The results obtained can provide some guidelines for the optimal designs of the insulation layers.     

液-质联用测定鱼体内甲基磺草酮的残留量

为了检测鱼体内甲基磺草酮的残留量,建立液相色谱串联质谱的方法测定甲基磺草酮。结果表明:在0.5~100μg/L浓度范围内,线性相关系数(r)为0.998 6。当添加质量分数为0.1~10μg/g时,甲基磺草酮在鱼体内的平均回收率为80.0%~99.3%,RSD为3.4%~8.4%。该方法的最小检出量为5.0×10-12g,鱼体内的最低检测质量分数(LOQ)为0.1μg/g。该方法操作简单可靠,准确度、精密度及其灵敏度均满足农药残留分析的要求,可用于鱼体内甲基磺草酮残留量的测定。     

弘扬大爱精神 端正辅导员价值取向

在当今社会各种思潮的冲击下,大学生群体的特殊性对高校辅导员及其工作带来了更大的挑战,因此如何弘扬大爱精神,端正辅导员价值取向就成为提高辅导员工作水平必须要面对的问题。只有准确认识大爱精神,贯穿到辅导员工作的全过程,努力提升辅导员自身综合素质,发挥辅导员人格魅力,认清辅导员工作价值,找准定位,辅以完善的辅导员发展机制,才能够真正的提高辅导员队伍的整体工作水平。     

湘方言表程度的形容词重叠形式

重叠形式是表达程度的重要手段之一。湘方言表程度的形容词重叠形式结构类型丰富,语义特征鲜明,同时也受到语用、认知等因素影响。     

组培川贝母质量标准研究

参照2010年版《中国药典》相关方法,建立组培川贝母总灰分、酸不溶性灰分、浸出物、薄层色谱等项目的检查方法并规定限度,采用紫外分光光度法建立组培川贝母的总生物碱含量测定方法并规定限度,以此对组培川贝母进行质量标准研究.结果表明：组培川贝母的总灰分不应超过2%,酸不溶性灰分不应超过1%,浸出物不得少于20%,总生物碱含量应在0.2%-0.3%之间;本研究建立的质量标准可以控制组培川贝母的质量.     

基于成本最小的公交人员排班优化模型

为了优化公交人员排班问题,提高公交公司的运营效率和资源利用率,以车辆行车计划为基础、公交公司运营成本最小为目标,构建了公交人员排班问题理论模型,并利用遗传算法和LINGO优化软件分别进行实例求解。算例分析表明,该模型具有可行性和合理性。     

国外社区学院建设的经验及其对我国的启示

社区学院的持续健康发展是全面推进社区教育、提高全民素质的重要基础,也是构建终身教育体系、建设学习型社会的必然要求。国外社区学院建设在立法、管理模式、社区教育工作者专业化、社会资源整合、技术支持等方面积累的成功经验对加强我国社区学院建设具有重要的借鉴意义。对此,我们需要建立健全相关法律法规、赋予社区学院及社区居民一定的自主管理权、加强社区教育工作者的专业化建设,以及充分利用现代信息技术,以促进我国社区教育发展,进而提高全民素质。     

一种超长短信拆分与合并方法

超长短信是影响短信业务使用感受的关键问题,本文对超长短信的基本原理进行分析,设计并实现了超长短信的发送和接收处理系统,通过超长短信进行自动的拆分和合并,实现用户透明的超长短信功能。     

Design and research of torque tube used in HTS motor

In order to improve the overall performance of high temperature superconducting （HTS） motor, a radial connection torque tube with high strength and low thermal leakage has been designed. Firstly, fiberglass epoxy composite is chosen as con- struction material. The structural size of the torque tube is obtained by means of load analysis and theoretical calculation. Secondly, thermal leakage of the torque tube is calculated with both theo- retical method and 3D finite-element analysis （FEA）. According to the result of the thermal analysis and mechanical loads, the struc- tural stresses of the torque tube are also obtained by FEA method. Lastly, a low temperature test platform is developed to verify the strength and the thermal leakage of the torque tube. The results show that the maximal shear stress of the torque tube is 24.3 MPa and thermal leakage of torque tube is 10.5 W, which satisfy the design requirements of the HTS motor. The torque tube also works in good condition at full-power and full-torque testing of the motor. The design method is also applicable for other similar design of torque tube in other applications.