水斗数对转轮性能影响的实验研究

研究了水斗数对冲击式水轮机性能的影响．对水斗数不等的几个转轮进行了能量试验，发现水斗数与转轮性能密切相关，进而探讨了水斗数对转轮性能影响的原因，为选型时正确确定水斗数提供帮助．     

油菜花序轴组织培养中愈伤组织同工酶和可溶性蛋白质变化的研究

本文报道了在愈伤组织形成过程中,酯酶、过氧化物酶同工酶及可溶性蛋白质含量的变化,并讨论了愈伤组织形成与这些大分子变化之间的关系。     

φ混合序列的完全矩收敛性

主要利用φ混合序列的矩不等式和随机变量的截尾技术,在适当的矩条件下,研究了φ混合序列的完全矩收敛性。本文的结果推广了独立序列和已有文献关于φ混合序列的相应结果,同时也将φ混合序列的完全收敛性改进到完全矩收敛性。     

Experimental and numerical study on plasma nitriding of AISI P20 mold steel

In this study, plasma nitriding was used to fabricate a hard protective layer on AISI P20 steel, at three process temperatures (450°C, 500°C, and 550°C) and over a range of time periods (2.5, 5, 7.5, and 10 h), and at a fixed gas N₂:H₂ ratio of 75vol%:25vol%. The morphology of samples was studied using optical microscopy and scanning electron microscopy, and the formed phase of each sample was determined by X-ray diffraction. The elemental depth profile was measured by energy dispersive X-ray spectroscopy, wavelength dispersive spectroscopy, and glow dispersive spectroscopy. The hardness profile of the samples was identified, and the microhardness profile from the surface to the sample center was recorded. The results show that ε-nitride is the dominant species after carrying out plasma nitriding in all strategies and that the plasma nitriding process improves the hardness up to more than three times. It is found that as the time and temperature of the process increase, the hardness and hardness depth of the diffusion zone considerably increase. Furthermore, artificial neural networks were used to predict the effects of operational parameters on the mechanical properties of plastic mold steel. The plasma temperature, running time of imposition, and target distance to the sample surface were all used as network inputs; Vickers hardness measurements were given as the output of the model. The model accurately reproduced the experimental outcomes under different operational conditions; therefore, it can be used in the effective simulation of the plasma nitriding process in AISI P20 steel.     

Early Cambrian phosphatized blastula- and gastrula-stage animal fossils from southern Shaanxi

Marine invertebrate animal embryos and their early developmental products are of great significance to the study of taxonomy and phylogeny of early animals. A great number of phosphatized globular fossils were collected fromthe early Cambrian Kuanchuanpu Member (upper Dengying Formation), southern Shaanxi, and a nearly complete develo-pmental sequence—from a fertilized egg, via blastodisc formation, blastula development, blastodisc enlargement toward gastrulae, to tissue differentiation—can be discerned in this collection. This discovery provides unmatchable material for studies on the origin, taxonomy, radiation, and ontogeny of early metazoans.     

原油沥青质吸附与沉积对储层岩石润湿性和渗透率的影响

原油沥青质吸附引起的油藏岩石润湿性改变和沥青质沉积对储层孔喉的堵塞是造成储层损害、导致油井产能下降的重要机理之一。首先 ,采用改进的自吸速率法和分光光度法 ,研究了原油沥青质吸附所引起的砂岩岩样润湿指数的变化 ;然后 ,利用岩心流动实验方法 ,定量评价了稠油沥青质沉积对储层岩石渗透率的影响。实验结果表明 ,岩心润湿指数随沥青质吸附量的增加而减小 ,从而导致油相的相对渗透率降低。地层水的离子组成是影响水湿性的主要因素之一。地层水所含无机阳离子的化合价价数越高 ,它与沥青质的协同作用所引起的润湿指数下降的程度越大。储层岩心油相渗透率下降的程度与沥青质沉积量和储层岩心的原始渗透率有关 ,沉积量越大或原始渗透率越低 ,则油相渗透率下降幅度越大。因此 ,对于原油中富含沥青质的油藏 ,特别是稠油油藏 ,尽可能抑制沥青质的吸附和沉积是保护储层的一项重要措施。     

The Balang Fauna―A new early Cambrian Fauna from Kaili City, Guizhou Province

In April 2004, Wu Yishan, a teacher from Kaili No. 4 Middle School, took his students to Wenglingtang to conduct popular science activities. They found fossils of trilobites and eocrinoids in gray and gray-greenish silty shale, and calcareous, silty mudrock in the upper part of the lower Cambrian Balang Formation. In May 2004, we were invited to investigate the new discovery.     

Early Cambrian protoconodonts and conodont-like fossils from China: Taxonomic revisions and stratigraphic implications

Tooth likephosphaticprotoconodontsand“con odont likefossils”arecharacteristiccomponentsoftheEarlyCambriansmallshellyfossils (SSF )withaworldwidedistribution .Theyarerepresentedexclu sivelybyisolatedscleritesandareoften presentinaceticacid etchedresiduesfromLowerCambriancar bonates .SincethefirstreportofProtohertzinaMis sarzhevsky 1973fromthebasalCambrianoftheYangtzePlatformin 1977[1] ,andalongwithenthusi asticresearchactivitiesonthesmallshellyfossilsandcandidatesectionsforaglobalPrecamb…     

Nanostructured TiO2（B）:the effect of size and shape on anode properties for Li-ion batteries

Reducing the dimensions of electrode materials from the micron to the nanoscale can have a profound influence on their properties and hence on the performance of electrochemical devices,e.g.Li-ion batteries,that employ such electrodes.TiO2(B) has received growing interest as a possible anode for Li-ion batteries in recent years.It offers the possibility of higher energy storage compared with the commercialized Li4Ti5O12.Bulk,nanowire,nanotube,and nanoparticle morphologies have been prepared and studied.However,to date these materials have not be compared in one article.In the current review we first summarize the different synthesis methods for the preparation of nanostructured TiO2(B);then present the effects of size and shape on the electrochemical properties.Finally TiO2(B) with nanometer dimensions exhibit a higher capacity to store Li,regardless of rate,due to structural distortions inherent at the nanoscale.     

十次幂和问题的解

给出不定方程１０＝ ｙ１０的一组正整数解