准噶尔盆地陆东地区白垩系储层特征及其主控因素

从岩石学特征、成岩作用、孔隙类型、结构特征以及储层性质的主要影响因素等方面 ,对准噶尔盆地陆东地区白垩系储层进行了研究。结果表明 ,储层岩石为长石质岩屑砂岩 ,成岩作用进入早成岩B亚期 ;孔隙类型主要为原生残余粒间孔 ,另有少量的溶蚀孔及微孔隙。该储层孔隙结构非均质性强 ,呼二段中粗孔喉最多 ,呼一段次之 ,连木沁组多为中孔细喉和较细喉 ,清水河组为细孔、细喉。储层性质差别较大 ,呼一段、呼二段为中孔、中渗储层 ,连木沁组为低孔、低渗储层 ,清水河组为低孔、特低渗储层。储层性质主要受沉积相、古气候、压实作用及砂岩粒径等因素的影响。     

水力压裂中多裂缝间相互干扰力学分析

将复变函数理论与位错理论相结合 ,在考虑了裂缝表面有流体压力作用且裂缝间存在相互干扰的情况下 ,建立了无限大介质中裂尖应力强度因子的数学模型 ,利用该模型可对水力压裂中多裂缝间的相互干扰进行力学分析。假设裂缝沿着垂直于局部最大周向拉应力方向扩展 ,应用数值方法对所建立的数学模型求解 ,得到裂尖的应力强度因子及转角。数值计算结果表明 ,裂缝间存在相互干扰时所产生的剪切应力强度因子远远小于法向应力强度因子。当两个裂缝尖端垂向距离为零时 ,法向应力强度因子达到最大值。两个裂缝尖端没交叠之前裂缝基本沿着轴线扩展 ;当尖端交叠面积较小时 ,两裂尖偏离自己的轴线向避开对方的方向扩展 ;当尖端交叠面积较大时 ,两裂缝向靠拢对方的方向扩展 ,最终将贯通在一起     

复杂条件下的低渗透油田生产特征

在考虑了启动压力、毛管力、重力等因素的情况下 ,推导了低渗透油田油水两相渗流时含水率和无因次采油、采液指数的数学模型 ,并分析了上述 3种因素在数学模型中的作用。结果表明 ,对于水湿油藏 ,毛管力和启动压力的存在使含水率和无因次采液指数增加 ,重力则使无因次采液指数降低 ,而对含水率的影响与地层倾角有关。 3种因素均对无因次采油指数无影响。在理论分析的基础上 ,对胜利油区大芦湖低渗透油田的含水率和无因次采油、采液指数进行了实例计算 ,进一步验证了理论分析结果的可靠性     

边水驱油藏调剖技术

针对边水驱油藏的地质及开发特点 ,提出了边水调剖技术 ,同时对调剖井点的选择、调剖剂的筛选、调剖剂用量的确定、调剖施工工艺等配套技术进行了研究。通过向优选的调剖井注入调剖剂 ,可以控制边水的侵入方向和推进速度 ,从而增大波及系数 ,提高最终采收率。 2 0 0 0年 5月到 1 1月 ,对高 1 0 4 5区块 8口井进行了边水调剖试验 ,共注入调剖剂 1 851 6m3。调剖后 ,内部井的含水率下降、产量回升 ,明显提高了区块的采收率。数值模拟预测结果表明 ,调剖增油超过 70 0 0t,投入产出比大于 1∶2。     

边界单元法三维应力分析计算程序

以三维弹性力学问题的基本解 (Kelvin解 )为基础开发了边界单元法三维弹性应力分析计算程序 ,并对其进行了验证。结果表明 ,该程序可用来求解三维弹性应力问题 ,尤其适用于三维应力集中问题。程序中采用动态分配内存 ,自动选点积分 ,并利用分块解法求解方程组 ,有效地节省了计算机资源 ,扩大了求解问题的规模。     

电弧喷涂铝及铝-锌涂层在动态腐蚀介质中的耐蚀性研究

对钢铁基体表面电弧喷涂铝及铝锌涂层进行了动态腐蚀实验 ,以失质量法计算了腐蚀速度 ,并探讨了腐蚀机理。采用SEM对铝及铝锌涂层腐蚀前后的外表形貌进行了观察 ,并对铝及铝锌涂层表面进行了能谱分析 ,采用电化学系统测试了涂层的自腐蚀电位。实验结果表明 ,在 3 %NaCl水溶液中铝涂层的耐蚀性优于铝锌涂层 ;其原因是铝涂层表面上氧化膜的自愈能力及自腐蚀电位高于铝锌涂层。研究还表明 ,铝及铝锌这些阳极涂层不仅能有效地保护它所覆盖的钢铁表面 ,还能保护暴露于腐蚀介质中的钢铁基体表面。在铝、铝锌涂层上刷涂有机涂料 ,有机涂料能渗透到金属涂层的孔隙中 ,将孔隙封闭。同时 ,有机涂层和金属涂层能构成复合涂层 ,其防腐效果更佳     

PI/TiO2纳米复合膜的H2/CH4和H2/N2分离性能

以可溶性聚酰亚胺为基质 ,经乙酸修饰后的钛酸丁酯为TiO2 溶胶前体 ,NMP为共溶剂 ,采用溶胶凝胶法可制得PI/TiO2 纳米复合膜。采用XPS、TEM和气体透气性能测试等手段 ,对复合膜的结构和H2 分离性能进行了表征。结果表明 ,复合膜中钛酸丁酯已转化为TiO2 ,PI与TiO2 两相结合完好。TiO2 以颗粒状均匀分布在PI基质中 ,其颗粒粒径约为 1 0nm。复合膜的H2 ,N2 和CH4 透气系数随着TiO2 含量的增加而明显增加。当TiO2 含量为2 2 3 %时 ,对H2 的透气系数为 1 4 .1Barrer,对H2 /N2 和H2 /CH4 的分离系数分别为 1 87.5和 1 4 3 .2 ,因此 ,该复合膜是一种较为理想的H2 分离和回收膜材料     

Land vehicle positioning using GPS and dead reckoning

To ensure reliable land vehicle positioning, the Global Positioning System (GPS) is one of the best techniques commonly used in present-day positioning systems. However, GPS signals are not available if line of sight with the satellites is lost. In this respect, the addition of the Dead Reckoning (DR) method to complement the GPS unit would enhance the reliability of land vehicle positioning system. For implementing the DR method, the magnetic sensor and accelerometer are used for obtaining heading and velocity or distance information. Calibration of two sensors' dynamic model and DR algorithm are also introduced in this paper. The test result utilizing the GPS and DR methods is analyzed in this paper. It utilize spositioning information from GPS receiver when GPSsignal is available, otherwise DR is started to compensate GPS outage with the GPS output as the original point. The results showed that the error in east and north produced by the DR algorithm for a short time interval can be limitedwithin an acceptable range.     

In-vehicle GPS/DR navigation system development and test results in Singapore

This paper introduces the in-car navigation system prototype development and test results under the context of Singapore. In the system, integrated GPS/DR is used for continuous vehicle positioning. A digital road network map database is built for the whole Singapore. The database is designed to support map matching, route determination, and route guidance functions. The prototype system demonstrates GPS positioning of the vehicle in real-time, tracking the vehicle onto a digital map with fix updates every one or two seconds.With the map matched vehicle location on the map, voice and/or text guidance is provide to the driver. The vehicle position can also be transferred to control centre through communication data link for the purpose of fleet management.     

A preliminary study of crassulacean acid metabolism (CAM) in the endangered aquatic quillwortIsoetes sinensis Palmer in China

Isoetes sinensis Palmer (Isoetaceae) is an aquatic or amphibious plant that is critically endangered in China. Previous studies have revealed the crassulacean acid metabolism (CAM)-like photosynthetic pathway occurs commonly in submerged leaves in genusIsoetes. Water chemistry parameters and the titratable acidity content of the plant extract were measured from samples obtained in the early morning (7∶00) and late afternoon (15∶00) from twoI. sinensis populations in China. One population occurs in the eulittoral zone of a freshwater tidal river at low elevation (134 m) and another occurs in a densely vegetated, high elevation (1 100 m) alpine shallow pool. Significant differences in pH and titratable acidity of the plant extract were detected between the morning and afternoon samples. These changes are associated with diurnal changes in water chemistry. Our results provide the first evidence for the existence of the CAM pathway in the East Asian endemicIsoetes sinensis Palmer. The magnitude of fluctuations in the titratable acidity of the plant extract may be correlated with the severe carbon limitation imposed on the plants by its aquatic habitat. Foundation item: Supported by the State Key Basic Research and Development Plan (G2000046805) Biography:Pang Xin-an (1974-), male, Master candidate, research direction: conservation biology.