原油沥青质吸附与沉积对储层岩石润湿性和渗透率的影响

原油沥青质吸附引起的油藏岩石润湿性改变和沥青质沉积对储层孔喉的堵塞是造成储层损害、导致油井产能下降的重要机理之一。首先 ,采用改进的自吸速率法和分光光度法 ,研究了原油沥青质吸附所引起的砂岩岩样润湿指数的变化 ;然后 ,利用岩心流动实验方法 ,定量评价了稠油沥青质沉积对储层岩石渗透率的影响。实验结果表明 ,岩心润湿指数随沥青质吸附量的增加而减小 ,从而导致油相的相对渗透率降低。地层水的离子组成是影响水湿性的主要因素之一。地层水所含无机阳离子的化合价价数越高 ,它与沥青质的协同作用所引起的润湿指数下降的程度越大。储层岩心油相渗透率下降的程度与沥青质沉积量和储层岩心的原始渗透率有关 ,沉积量越大或原始渗透率越低 ,则油相渗透率下降幅度越大。因此 ,对于原油中富含沥青质的油藏 ,特别是稠油油藏 ,尽可能抑制沥青质的吸附和沉积是保护储层的一项重要措施。     

The Balang Fauna―A new early Cambrian Fauna from Kaili City, Guizhou Province

In April 2004, Wu Yishan, a teacher from Kaili No. 4 Middle School, took his students to Wenglingtang to conduct popular science activities. They found fossils of trilobites and eocrinoids in gray and gray-greenish silty shale, and calcareous, silty mudrock in the upper part of the lower Cambrian Balang Formation. In May 2004, we were invited to investigate the new discovery.     

Effect of slag composition on the cleanliness of 28MnCr5 gear steel in the refining processes

The equilibrium reaction between CaO—Al₂O₃—SiO₂—MgO slag and 28MnCr5 molten steel was calculated to obtain the suitable slag composition which is effective for decreasing the oxygen content in molten steel. The dissolved oxygen content [O] in molten steel under different top slag conditions was calculated using a thermodynamic model and was measured using an electromotive force method in slag–steel equilibrium experiments at 1873 K. The relations among [O], the total oxygen content (T.O), and the composition of the slag were investigated. The experimental results show that both [O] and T.O decrease with decreasing SiO₂ content of the slag and exhibit different trends with the changes in the CaO/Al₂O₃ mass ratio of the slag. Increasing the CaO/Al₂O₃ mass ratio results in a decrease in [O] and an increase in T.O. To ensure that T.O ≤ 20 ppm and [O] ≤ 10 ppm, the SiO₂ content should be controlled to <5wt%, and the CaO/Al₂O₃ mass ratio should be in the range from 1.2 to 1.6.     

Analysis of the formation conditions and characteristics of interphase and random vanadium precipitation in a low-carbon steel during isothermal heat treatment

The characteristics of nanosized precipitates in steels depend on the heat-treatment parameters. The effects of characteristics of vanadium precipitates formed during isothermal heat treatment on the hardness of the ferrite matrix in low-carbon vanadium-alloyed steel were investigated through analysis of transmission electron microscopy images and microhardness measurements. The results show that, during isothermal holding in the temperature range from 675 to 750℃, only interphase precipitation occurs, whereas only random precipitation occurs in the ferrite matrix during holding at 600℃. Furthermore, during isothermal heat treatment between 600 and 675℃, both random and interphase precipitates occurred in the ferrite. Nanoscale vanadium carbides with different atomic ratios of vanadium (V) and carbon (C) were the dominant precipitates in the random and interphase precipitates. The sizes of random precipitation carbides were smaller than those of interphase ones. Also, the sample isothermally heat treated at 650℃ for 900 s exhibited a higher hardness with a narrower hardness distribution.     

Early Cambrian protoconodonts and conodont-like fossils from China: Taxonomic revisions and stratigraphic implications

Tooth likephosphaticprotoconodontsand“con odont likefossils”arecharacteristiccomponentsoftheEarlyCambriansmallshellyfossils (SSF )withaworldwidedistribution .Theyarerepresentedexclu sivelybyisolatedscleritesandareoften presentinaceticacid etchedresiduesfromLowerCambriancar bonates .SincethefirstreportofProtohertzinaMis sarzhevsky 1973fromthebasalCambrianoftheYangtzePlatformin 1977[1] ,andalongwithenthusi asticresearchactivitiesonthesmallshellyfossilsandcandidatesectionsforaglobalPrecamb…     

Nanostructured TiO2（B）:the effect of size and shape on anode properties for Li-ion batteries

Reducing the dimensions of electrode materials from the micron to the nanoscale can have a profound influence on their properties and hence on the performance of electrochemical devices,e.g.Li-ion batteries,that employ such electrodes.TiO2(B) has received growing interest as a possible anode for Li-ion batteries in recent years.It offers the possibility of higher energy storage compared with the commercialized Li4Ti5O12.Bulk,nanowire,nanotube,and nanoparticle morphologies have been prepared and studied.However,to date these materials have not be compared in one article.In the current review we first summarize the different synthesis methods for the preparation of nanostructured TiO2(B);then present the effects of size and shape on the electrochemical properties.Finally TiO2(B) with nanometer dimensions exhibit a higher capacity to store Li,regardless of rate,due to structural distortions inherent at the nanoscale.     

十次幂和问题的解

给出不定方程１０＝ ｙ１０的一组正整数解     

利用模板实现持久类

介绍了利用模板技术在母语中定义持久类的实现方法．该方法通过抽象持久类的一般特性定义出持久类的共同的类模板，定义持久类的过程就是由类模板生成模板类的过程．该方法完全区分持久语义和挥发语义，能很好地处理属性的多态性，易于管理持久对象，为最终实现面向对象数据库和持久性程序设计语言提供了很好的基础     

单模激光线性模型瞬态的随机共振

根据线性化的单模激光输出光强方程,运用计算光强的相关函数,得到光强的功率谱及信噪比的方法,计算了在δ函数形式关联的两白噪声驱动下单模激光线性模型瞬态的功率谱及信噪比,发现了瞬态的随机共振,研究了信噪比随时间的演化及到达定态的时间,分析了参数对随机共振的影响。     

唇鱼骨基因组DNA提取与ISSR-PCR的优化

以唇鱼骨为材料,分别采用4种不同方法(CTAB法、SDS法、ROSE法及试剂盒)提取基因组DNA,并对影响PCR反应的模板DNA、引物、dNTPs、Mg2+、Taq酶浓度等主要因子进行了优化,建立了适合唇鱼骨基因组DNA的ISSR-PCR反应体系.25μL的PCR反应液含有的组分和终浓度分别为:约60 ng模板DNA,1.2 U Taq酶,0.4 μrnol/L引物,2.0 mmol/L MgCl2,0.2 mmol/L dNTPs,2%甲酰胺.结果表明,利用优化反应体系对4种不同方法提取的DNA进行PCR扩增,均能得到较好的PCR扩增条带,以试剂盒法最佳,为淡水溪流性同属鱼类遗传多样性分析奠定了技术基础.