基于改进粒子群算法优化的自抗扰控制器（ADRC）及其应用

针对自抗扰控制器参数多,不利于整定的问题,提出了一种基于改进的粒子群算法（PSO）的自抗扰控制器参数整定方法。该方法引入了PSO中各个粒子的惯性权值的自适应调整机制,以此来维持粒子的多样性和加速粒子群算法的收敛性。利用改进粒子群算法优化的二阶自抗扰控制器控制主气温控制系统,仿真结果验证了算法的可行性和有效性。     

ISTC： A New Method for Clustering Search Results

A new common phrase scoring method is proposed according to term frequency-inverse document frequency （TFIDF） and independence of the phrase. Combining the two properties can help identify more reasonable common phrases, which improve the accuracy of clustering. Also, the equation to measure the in-dependence of a phrase is proposed in this paper. The new algorithm which improves suffix tree clustering algorithm （STC） is named as improved suffix tree clustering （ISTC）. To validate the proposed algorithm, a prototype system is implemented and used to cluster several groups of web search results obtained from Google search engine. Experimental results show that the improved algorithm offers higher accuracy than traditional suffix tree clustering.     

基于关系积的属性约简算法

粗糙集的属性约简是一个NP难问题,目前尚无高效的算法.基于集合理论,提出了关系积概念和基于关系积的属性约简算法,把决策表的属性约简过程转化为关系积的运算,减小了对决策表的扫描次数,提高了属性约简的效率;算法采用自底向上和宽度优先的搜索策略,可确保找到最小属性约简集.结合实例,给出了算法的具体实现.     

高压输电线路防鸟设施应用及效果研究

鸟害闪络是引起高压输电线路跳闸的主要原因之一.采用实地抽样调查的方法,对吉林省9个地区1 518基220kV高压杆塔上防鸟害设施的种类、损毁状况、防鸟效果和存在的问题进行了研究.结果表明:吉林省目前主要应用障碍性防鸟设施防止鸟类在输电杆塔上栖落和筑巢,以风力驱鸟器、鸟刺、滚动针式驱鸟器和防鸟罩为主;调查杆塔安装比例为53.6%,各地区存在差异;平均每基杆塔安装的防鸟设施数量为4.8个;不同类型防鸟设施损毁率不同,平均损毁率约为18.0%,其中带鸟刺风力驱鸟器和普通风力驱鸟器损坏率较高,分别为27.5%和27.3%.安装防鸟设施未能完全阻止鸟类在输电杆塔筑巢,但可在一定程度上改变鸟类在输电杆塔上的筑巢位置进而减少鸟害闪络的发生几率.     

Direct detection of more than 50% of the Duchenne muscular dystrophy mutations by field inversion gels

Duchenne muscular dystrophy (DMD) is an X-linked disorder affecting about 1 in 3,500 males. It is allelic with the milder Becker muscular dystrophy. The biochemical basis for both diseases is unknown and no effective treatment is available. Long-range physical mapping has shown that the DMD gene, localized in Xp21, is extremely large, exceeding 2 million base pairs. Until now, carrier detection and prenatal diagnosis has involved the use of linked restriction fragment length polymorphism markers which detect muscular dystrophy-associated deletions in about 10% of the cases. Field inversion gel electrophoresis (FIGE) allows the detection of structural rearrangements in 21 out of 39 of the DMD patients studied (54%), of which 14 (65%) were not detected by conventional methods. Large deletions seem to make up a much higher fraction of the DMD mutations than so far indicated by other methods. A region prone to deletion was located in the distal half of the gene. FIGE analysis could provide a valuable extension of information for carrier detection and prenatal diagnosis. The technique should be generally applicable to the study of diseases involving structural chromosomal rearrangements.     

Effect of slag composition on the cleanliness of 28MnCr5 gear steel in the refining processes

The equilibrium reaction between CaO—Al₂O₃—SiO₂—MgO slag and 28MnCr5 molten steel was calculated to obtain the suitable slag composition which is effective for decreasing the oxygen content in molten steel. The dissolved oxygen content [O] in molten steel under different top slag conditions was calculated using a thermodynamic model and was measured using an electromotive force method in slag–steel equilibrium experiments at 1873 K. The relations among [O], the total oxygen content (T.O), and the composition of the slag were investigated. The experimental results show that both [O] and T.O decrease with decreasing SiO₂ content of the slag and exhibit different trends with the changes in the CaO/Al₂O₃ mass ratio of the slag. Increasing the CaO/Al₂O₃ mass ratio results in a decrease in [O] and an increase in T.O. To ensure that T.O ≤ 20 ppm and [O] ≤ 10 ppm, the SiO₂ content should be controlled to <5wt%, and the CaO/Al₂O₃ mass ratio should be in the range from 1.2 to 1.6.     

Analysis of the formation conditions and characteristics of interphase and random vanadium precipitation in a low-carbon steel during isothermal heat treatment

The characteristics of nanosized precipitates in steels depend on the heat-treatment parameters. The effects of characteristics of vanadium precipitates formed during isothermal heat treatment on the hardness of the ferrite matrix in low-carbon vanadium-alloyed steel were investigated through analysis of transmission electron microscopy images and microhardness measurements. The results show that, during isothermal holding in the temperature range from 675 to 750℃, only interphase precipitation occurs, whereas only random precipitation occurs in the ferrite matrix during holding at 600℃. Furthermore, during isothermal heat treatment between 600 and 675℃, both random and interphase precipitates occurred in the ferrite. Nanoscale vanadium carbides with different atomic ratios of vanadium (V) and carbon (C) were the dominant precipitates in the random and interphase precipitates. The sizes of random precipitation carbides were smaller than those of interphase ones. Also, the sample isothermally heat treated at 650℃ for 900 s exhibited a higher hardness with a narrower hardness distribution.     

Isothermal reduction kinetics and mineral phase of chromium-bearing vanadium-titanium sinter reduced with CO gas at 873-1273 K

Reduction of chromium-bearing vanadium-titanium sinter (CVTS) was studied under simulated conditions of a blast furnace, and thermodynamics and kinetics were theoretically analyzed. Reduction kinetics of CVTS at different temperatures was evaluated using a shrinking unreacted core model. The microstructure, mineral phase, and variation of the sinter during reduction were observed by X-ray diffraction, scanning electron microscopy, and metallographic microscopy. Results indicate that porosity of CVTS increased with temperature. Meanwhile, the reduction degree of the sinter improved with the reduction rate. Reduction of the sinter was controlled by a chemical reaction at the initial stage and inner diffusion at the final stage. Activation energies measured 29.22-99.69 kJ/mol. Phase transformations in CVTS reduction are as follows:Fe₂O₃→Fe₃O₄→FeO→Fe; Fe₂TiO₅→Fe₂TiO₄→FeTiO₃; FeO·V₂O₃→V₂O₃; FeO·Cr₂O₃→Cr₂O₃.     

Measurement of laminar burning velocities of iso-butanol-air mixtures

The laminar burning velocity of iso-butanol-air mixtures was measured under different initial pressures, initial temperatures and equivalence ratios using high-speed schlieren photography and outwardly propagation flame in a constant volume combustion bomb. Based on the analysis of stretched flame propagation speed and stretch rate, the laminar burning velocities and Markstein lengths of iso-butanol-air flames are obtained. In accordance, with photos of flame, an analysis of flame stability and the influencing factors is carried out. The results show that the laminar burning velocity is decreased with the increase of initial pressure and is increased with the increase of initial temperature. The maximum value of laminar burning velocity is presented at the equivalence ratio of 1.2. The Markstein length is decreased with the increase of equivalence ratio. For specified equivalence ratio, the Markstein length is decreased with the increase of initial temperature and initial pressure. Thus, the flame instability is increased with the increase of equivalence ratio, initial temperature and initial pressure.     

两种前处理方法测定菜籽油中6种金属元素含量的比较

目的:比较不同前处理方法对菜籽油中6种金属元素含量测定的影响.方法:分别使用干灰化法和湿消化法进行前处理,并用火焰原子吸收分光光度法分别测定15个菜籽油样品中铅、镉、铜、铁等6种金属元素的含量.结果:干灰化法和湿消化法处理后所测菜籽油样品中Pb、Cu含量差异无统计学意义(P>0.05),Fe、Mn含量差异有统计学意义(P<0.05).各元素的R2均大于0.99,干灰化法的加标回收率81.90%~107.45%,湿消化法的加标回收率99.90%~108.05%.均满足痕量分析要求,相比之下,干灰化法与湿消化法的加标回收率比较差异有统计学意义(P<0.05),且湿消化法-火焰原子吸收分光光度法测定油样的回收率相对干灰化法的要高.结论:两种方法都能获得准确的测定结果;湿消化法要优于干灰化法.