A novel method for improving cerussite sulfidization

Evaluation of flotation behavior, solution measurements, and surface analyses were performed to investigate the effects of chloride ion addition on the sulfidization of cerussite in this study. Micro-flotation tests indicate that the addition of chloride ions prior to sulfidization can significantly increase the flotation recovery of cerussite, which is attributed to the formation of more lead sulfide species on the mineral surface. Solution measurement results suggest that the addition of chloride ions prior to sulfidization induces the transformation of more sulfide ions from pulp solution onto the mineral surface by the formation of more lead sulfide species. X-ray diffraction and energy-dispersive spectroscopy indicate that more lead sulfide species form on the mineral surface when chloride ions are added prior to sulfidization. These results demonstrate that the addition of chloride ions prior to sulfidization can significantly improve the sulfidization of cerussite, thereby enhancing the flotation performance.     

Primary Sn-rich titianite in the Qitianling granite, Hunan Province, southern China: An important type of tin-bearing mineral and its implications for tin exploration

The Qitianling calc-alkaline granite in Hunan Province (South China) has attracted much attention since the discovery of the Furong super-large tin deposit. The present study provides new mineralogical data to address their implications for exploration of tin deposits. In the Taoxiwo granite in the southeastern part of the Qitianling granite body, Sn-rich titanite was identified as an important type of Sn-bearing mineral. The titanite commonly occurs with biotite as euhedral crystals, exhibiting typical envelope-like shape and sector-zoning texture. These indicate that the titanite most likely crystallized in the magmatic stage. Electron-microprobe analyses show that the titanite is enriched in tin up to 1.12 wt% SnO₂, with an average of 0.43 wt%. With the crystallization of the granite, primary minerals undertook hydrothermal alteration by magma-derived fluids. Subsequently, in the hydrothermal stage, the primary Sn-bearing titanite was altered (at least partially), but still preserved its typical envelope-shaped outline. Micro-scale cassiterite is a representative product of such alteration; other secondary minerals include fluorite, ilmenite, Sn-bearing rutile and quartz. Therefore, the titanite, commonly present in the calcalkaline granites, can be treated as an important Sn-carrying mineral in the Qitianling granite, reflecting the primary magmatic environment with tin enrichment. The hydrothermal alteration of the primary titanite and subsequent crystallization of cassiterite recorded a process of leaching and accumulation of tin in magmatic-hydrothermal evolution of the Sn-bearing granite. Thus, this titanite has important implications for tin exploration. Supported by National Natural Science Foundation of China (Grant Nos. 40730423 and 40221301) and Project of China Geological Survey (Grant No. 1212010632100)     

Development of a middle and low latitude theoretical ionospheric model and an observation system data assimilation experiment

On the basis of previous work, we develop a middle and low latitude theoretical ionospheric model in this paper, named Theoretical Ionospheric Model of the Earth in the Institute of Geology and Geophysics, Chinese Academy of Sciences （TIME-IGGCAS）. TIME-IGGCAS solves the equations of mass continuity, motion and energy of electron and ions self-consistently and uses an eccentric dipole field approximation to the Earth＇s magnetic field. We combine the Eulerian and Lagrangian approaches in the model and take account of the plasma ExB drift velocity. Calculation results reveal that the model is steady and credible and can reproduce most large-scale features of ionosphere. By using TIME-IGGCAS, we carried out an observation system data assimilation experiment. Assimilation results show that the ExB drift velocity can be accurately estimated by ingesting the observed foF2 and hmF2 into the model applying nonlinear least-square fit method. We suggest that this work is of great significance in the development of ionospheric data assimilation model to give better nowcast and forecast of ionosphere.     

Variable diffusion boundary layer and diffusion flux at sediment-water interface in response to dynamic forcing over an intertidal mudflat

The diffusion boundary layer (DBL) significantly limits the exchange between sediment and overlying water and therefore becomes a bottleneck of diffusive vertical flux at the sediment-water interface (SWI). Variable DBL thickness and diffusion flux in response to dynamic forcing may influence replenishment of nutrients and secondary pollution in coastal waters. In situ measurements of velocity in the bottom boundary layer (BBL) and oxygen concentration in the DBL were made over an intertidal mudflat, using an acoustic Doppler current and mini profiler. A linear distributed zone in the oxygen profile, the profile slope discontinuity and variance of concentration can be used to derive accurate DBL thickness. Diffusion fluxes calculated from the water column and sediment are identical, and their bias is less than 6%. A numerical model PROFILE is used to simulate the in situ dissolved oxygen profile, and layered dissolved oxygen consumption rates in the sediment are calculated. The DBL thickness (0.10-0.35 mm) and diffusion flux (15.4-53.6 mmol m 2 d 1) vary with a factor of 3.5 during a tidal period. Over an intertidal mudflat, DBL thickness is controlled by flow speed U in the BBL, according to δDBL=1686.1DU 1+0.1 (D is the molecular diffusion coefficient). That is, the DBL thickness δDBL increases with decreasing flow speed U. Changes of diffusion flux at the SWI are caused by variations in the water above the sediment and the turbulent mixing intensity. The diffusion flux is positively related to the turbulent dissipation rate, friction velocity and turbulent energy. Under the influence of dynamics in the BBL, DBL thickness and flux vary significantly.     

Three-dimensional crustal velocity structure of P-wave in East China from wide-angle reflection and refraction surveys

The 3-D crustal structure of P-wave velocity in East China is studied based on the data obtained by wide-angle seismic reflection and refraction surveys.The results suggest that a deep Moho disconti-nuity exists in the western zone of the study region,being 35―48 thick.High-velocity structure zones exist in the upper crust shallower than 20 km beneath the Sulu and Dabie regions.The cause of high-velocity zones is attributable to high-pressure metamorphic(HPM) and ultra-high-pressure metamorphic(UHPM) terran...     

Lasing on pyroclastic rocks: A case study of <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar dating on Moshishan Group,eastern Zhejiang Province

It is difficult to date pyroclastic rocks, for almost all the dating methods, due to the multiple sources during their formation. ^40Ar/^39gAr incremental heating results on groundmass selected from the samples show that the age spectra are meaningless geologically. However, singe crystal total fusions of CO2 lasing on the sanidine separates could yield rational 4^40Ar/^39Ar results and distinguish their sources in this study. Timing on three formations of the Moshishan Group, after avoiding the exotic and altered grains by lasing on the single sanidine separate, was reported in this paper. The lowermost portion of the Chawan Formation gives an age of 113.7±0.3 Ma; the lower part of the Xishantou Formation was formed 116.4±0.4 Ma ago and the bottom of the Gaowu Formation took its shape at 118.4±0.4 Ma. These new ages are much younger than the previous ones, suggesting that these thick volcanic formations had been formed in very short durations.     

Formal analysis on an extended security model for database systems

In order to develop highly secure database systems to meet the requirements for class B2, the BLP （Bell-LaPudula） model is extended according to the features of database systems. A method for verifying security model for database systems is pro- posed. According to this method, an analysis by using Coq proof assistant to ensure the correctness and security of the extended model is introduced. Our formal security model has been verified secure. This work demonstrates that our verification method is effective and sufficient.     

An Improved Identity-Based Society Oriented Signature Scheme with Anonymous Signers

In this paper, we present an improved identity-based society oriented signature scheme with anonymous signers, which satisfies： （1） when members leave or join an organization, the public verification key and the signature verification procedure are unchanged; （2） a user participates in several organizations at the same time, her secret key is only related with her identity. However, no previous schemes have these two properties.     

Mechanism of brittle-ductile transition of a glass-ceramic rigid substrate

The hardness, elastic modulus, and scratch resistance of a glass-ceramic rigid substrate were measured by nanoindentation and nanoscratch, and the fracture toughness was measured by indentation using a Vickers indenter. The results show that the hardness and elastic modulus at a peak indentation depth of 200 nm are 9.04 and 94.70 GPa, respectively. These values reflect the properties of the glass-ceramic rigid substrate. The fracture toughness value of the glass-ceramic rigid substrate is 2.63 MPa·m1/2. The material removal mechanisms are seen to be directly related to normal force on the tip. The critical load and scratch depth estimated from the scratch depth profile after scratching and the friction profile are 268.60 mN and 335.10 nm, respectively. If the load and scratch depth are under the critical values, the glass-ceramic rigid substrate will undergo plastic flow rather than fracture. The formula of critical depth of cut described by Bifnao et al. is modified based on the difference of critical scratch depth     

Design and fabrication of superconducting HEB mixer

This paper describes the design and fabrication of superconducting hot electron bolometer （HEB） mixer based on ultra-thin superconducting NbN films. The high quality films were epitaxially grown on high resistance Si substrates. The device was fabricated by magnetron sputtering, electron beam lithography （EBL）, reactive ion etching （RIE）, lithography, and so on. The device＇s resistance-temperature （R-T） curves and current-voltage （I-V） curves were studied. The results of THz response of the device are presented. Y-factor technique was used to measure the device＇s noise temperature. When the device was irradiated with a laser radiation of 2.5 THz, the obtained lowest noise temperature of the device was 2213 K.