Biodegradation of dissolved organic carbon in soil extracts and leachates from a temperate forest stand and its relationship to ultraviolet absorbance

The amount and biodegradability of dissolved organic carbon (DOC) in forest floors can contribute to carbon sequestration in soils and the release of CO 2-C from soil to the atmosphere.There is only limited knowledge about the biodegradation of DOC in soil extracts and leachates due to the limitations inherent in degradation experiments.Differences in the biodegradation of DOC were studied in forest soil extracts using cold and hot water and 4 mmol/L CaCl 2 solution and in soil leachates sampled under different conditions over a wide range of DOC concentrations.From these results,we developed a simple and rapid method for determining the biodegradable organic C in forest floors.The hot water extracts and CaCl 2 extracts after CH 3 Cl fumigation contained higher concentrations of biodegradable organic C than the cold water extracts and CaCl 2 extracts before fumigation,with rapid DOC degradation occurring 24-48 h after incubation with an inoculum,followed by slow DOC degradation till 120-168 h into the incubation.During a 7-d incubation with an inoculum,the variation in DOC degradation in the different soil extracts was consistent with the change in special UV absorbance at 254 nm.Relatively higher levels of biodegradable organic C were detected in soil leachates from the forest canopy than in forest gaps between April and October 2008 (P <0.05).Relatively lower concentrations of DOC and biodegradable organic C were observed in soil leachates from N-fertilized plots during the growing season compared with the control,with the exception of the plot treated with KNO 3 at a rate of 45 kg N ha 1 a 1.Around 77.4% to 96.3% of the variability in the biodegradable organic C concentrations in the forest floors could be accounted for by the initial DOC concentration and UV absorbance at 254 nm.Compared with the conventional inoculum incubation method,the method of analyzing UV absorbance at 254 nm is less time consuming and requires a much smaller sample volume.The results suggest that the regression models obtained using the initial DOC concentration and UV absorbance can provide a rapid,simple and reliable method for determining the biodegradable organic C content,especially in field studies involving relatively large numbers of samples.     

Study on pitting process of 316L stainless steel by means of staircase potential electrochemical impedance spectroscopy

Pitting corrosion of 316L stainless steel in NaCl solution was investigated by means of staircase potential electrochemical impedance spectroscopy (SPEIS). The investigation focused on the transition of stainless steel from the passive state to pitting corrosion. Based on the evolution of electrical parameters of the equivalent electrical circuit, it is suggested that the most probable mechanism of pit creation is the film breaking model. The result demonstrates that staircase potential electrochemical impedance spectroscopy is an effective method for the investigation of pitting corrosion.     

Simulation of wind gust structure in the atmospheric boundary layer with Lattice Boltzmann Method

Cold fronts occur in northern East Asia during winter and spring.After cold frontal passage,airflow is downward and accompa-nying strong winds fluctuate significantly;this is termed wind gusts.Analysis of observation data shows that wind gust structure has coherent characteristics.This is important for entrainment of spring dust storms into the upper boundary layer,where they are transported great distances.The Lattice Boltzmann Method(LBM) is a computational fluid technique based on the Boltzmann transport equation.The LBM has been used to study complex motion such as turbulence,because it describes motion at the micro level.In this paper,Large eddy simulation is introduced in the LBM,enabling simulation of turbulent flow in the atmospheric boundary layer.The formation and development of wind gusts are simulated,and a coherent structure with a combination of wave and vortex is obtained.This explains the mechanism of soil erosion and sand entrainment by the coherent structure of wind gusts.     

Cluster Synchronization in a Complex Dynamical Network with Two Nonidentical Clusters

This paper further investigates cluster synchronization in a complex dynamical network with two-cluster. Each cluster contains a number of identical dynamical systems, however, the subsystems composing the two clusters can be different, i.e., the individual dynamical system in one cluster can differ from that in the other cluster. Complete synchronization within each cluster is possible only if each node from one cluster receives the same input from nodes in other cluster. In this case, the stability condition of one-cluster synchronization is known to contain two terms： the first accounts for the contribution of the inner-cluster coupling structure while the second is simply an extra linear term, which can be deduced by the ＂same-input＂ condition. Applying the connection graph stability method, the authors obtain an upper bound of input strength for one cluster if the first account is known, by which the synchronizability of cluster can be scaled. For different clusters, there are different upper bound of input strength by virtue of different dynamics and the corresponding cluster structure. Moreover, two illustrative examples are presented and the numerical simulations coincide with the theoretical analysis.     

A STAGE-STRUCTURED SI ECO-EPIDEMIOLOGICAL MODEL WITH TIME DELAY AND IMPULSIVE CONTROLLING*

This paper formulates a robust stage-structured SI eco-epidemiological model with periodic constant pulse releasing of infectious pests with pathogens. The authors show that the conditions for global attractivity of the ＇pest-eradication＇ periodic solution and permanence of the system depend on time delay, hence, the authors call it ＂profitless＂. Further, the authors present a pest management strategy in which the pest population is kept under the economic threshold level （ETL） when the pest population is uniformly persistent. By numerical analysis, the authors also show that constant maturation time delay for the susceptible pests and pulse releasing of the infectious pests can bring obvious effects on the dynamics of system.     

Robust model predictive control of continuous uncertain systems*

The authors concern robust model predictive control for linear continuous systems with polytopic uncertainties and input constraints. At each sampling time, a piecewise constant control sequence is obtained by solving a set of linear matrix inequalities. The sufficient conditions on the existence of the model predictive control are given, and the robust stability of the closed-loop systems is guaranteed. A simulation example illustrates the efficiency of the proposed method.     

Participatory Sustainability Impact Assessment: Scientific Policy Advice as a Social Learning Process

This paper deals with the development of scientific policy advice by providing a methodology to foster a social learning process. The methodology, called participatory Sustainability Impact Assessment (pSIA), aims to structure complex problem situations, to clarify interests and basic assumptions, to interpret scientific studies, to develop impact assessment, and to explore sensitivity of uncertainty and lack of information. In pSIA workshops the participants are supposed to build conceptual models with different modelling methods, like System Dynamics, Value Chain Analysis, and Morphological Analysis. A case study is presented that describes a workshop series with political as well as academic actors, applying the pSIA approach to an impact assessment of Economic Partnership Agreements between the European Union and the Eastern and Southern Africa Region.

Improving moving average trading rules with boosting and statistical learning methods

We present a system for combining the different types of predictions given by a wide category of mechanical trading rules through statistical learning methods (boosting, and several model averaging methods like Bayesian or simple averaging methods). Statistical learning methods supply better out‐of‐sample results than most of the single moving average rules in the NYSE Composite Index from January 1993 to December 2002. Moreover, using a filter to reduce trading frequency, the filtered boosting model produces a technical strategy which, although it is not able to overcome the returns of the buy‐and‐hold (B&H) strategy during rising periods, it does overcome the B&H during falling periods and is able to absorb a considerable part of falls in the market. Copyright © 2008 John Wiley & Sons, Ltd.     

Suan Shu Shu A Book on Numbers and Computations

In December and January of 1983–1984, archaeologists excavating the tomb of an ancient Chinese provincial bureaucrat at a Western Han Dynasty site near Zhangjiashan, in Jiangling county, Hubei Province, discovered a number of books on bamboo strips, including inter alia works on legal statutes, military practice, and medicine. Among these was a previously unknown mathematical work on some 200 bamboo strips, the Suan shu shu, or Book of Numbers and Computations. Based upon other works found in the tomb, especially a copy of the Er nian lü ling (Laws and Decrees of the Second Year (of the reign of empress Lü, i.e. Lü Hou)), archaeologists have dated the tomb to ca. 186 BCE (Lü Hou’s regency lasted from 188 to 180 BCE). The Suan shu shu, as the earliest yet discovered work devoted specifically to mathematics from ancient China, has stirred considerable interest among Chinese historians of science. The translation and commentary offered here draw extensively on the works cited in Sect. 3 below. Several appendixes devoted to specific issues related to translating the Suan shu shu, including its title and the problem of determining English equivalents for various commodities that arise in the text, may be found in Appendix II. An erratum to this article can be found at     

COMPARISON OF TWO METHODS OF OPERATING THEATRE PLANNING： APPLICATION IN BELGIAN HOSPITAL

Operating Theatre is the centre of the hospital management＇s efforts. It constitutes the most expensive sector with more than 10% of the intended operating budget of the hospital. To reduce the costs while maintaining a good quality of care, one of the solutions is to improve the existent planning and scheduling methods by improving the services and surgical specialty coordination or finding the best estimation of surgical case durations. The other solution is to construct an effective surgical case plan and schedule. The operating theatre planning and scheduling is the two important steps, which aim to make a surgical case programming with an objective of obtaining a realizable and efficient surgical case schedule. This paper focuses on the first step, the operating theatre planning problem. Two planning methods are introduced and compared. Real data of a Belgian university hospital ＂Tivoli＂ are used for the experiments.