Effects of cold rolling on the microstructure and mechanical properties of Fe-Ni-Mn-Mo-Ti-Cr maraging steels

Effects of cold rolling on the microstructure and mechanical properties of Fe-Ni-Mn-Mo-Ti-Cr maraging steels were studied. To investigate the microstructure and mechanical properties, optical microscopy, scanning electron microscopy, X-ray diffraction, tensile test, and hardness test were used. The results show that the solution-annealing treatment in the cold-rolled steel redounds to the formation of submicrocrystalline Fe₂(Mo, Ti) Laves phase particles, which are stable at high temperatures. These secondary Laves phase particles prevent from recrystallization at high temperatures and correspond to semi-brittle fracture in the subsequent aging treatment.     

A time-saving method to assess the efficiency of corrosion inhibitors by electro osmosis

The corrosion inhibitor is one of the most important technologies to enhance the durability of steel-reinforced concrete. A kind of time-saving method was developed to assess the inhibitor efficiency by using a 32 V electric field to accelerate chloride ion migration in concrete. Potentiodynamic polarization scanning test was used to evaluate the corrosion states. The comprehensive efficiency of an inhibitor should be assessed in two aspects: resistance to chloride ion permeability and inhibiting efficiency. The specimens with different mixing amount of sodium nitrite and migration corrosion inhibitors were used to verify the accuracy and reliability of this method. The results show the differences in inhibiting efficiency of the inhibitors clearly, indicating the reliability of this time-saving method.     

Mechanism of brittle-ductile transition of a glass-ceramic rigid substrate

The hardness, elastic modulus, and scratch resistance of a glass-ceramic rigid substrate were measured by nanoindentation and nanoscratch, and the fracture toughness was measured by indentation using a Vickers indenter. The results show that the hardness and elastic modulus at a peak indentation depth of 200 nm are 9.04 and 94.70 GPa, respectively. These values reflect the properties of the glass-ceramic rigid substrate. The fracture toughness value of the glass-ceramic rigid substrate is 2.63 MPa·m1/2. The material removal mechanisms are seen to be directly related to normal force on the tip. The critical load and scratch depth estimated from the scratch depth profile after scratching and the friction profile are 268.60 mN and 335.10 nm, respectively. If the load and scratch depth are under the critical values, the glass-ceramic rigid substrate will undergo plastic flow rather than fracture. The formula of critical depth of cut described by Bifnao et al. is modified based on the difference of critical scratch depth     

Rolling-induced microstructure change in Zr_（65）Al_（7.5）Ni_（10）Cu_（12.5）Ag_5 bulk metallic glass

The microstructures and free-volume evolutions of as-cast and pre-annealed Zr65Al7.5Ni10Cu12.5Ag5 bulk metallic glasses during rolling deformation have been investigated. No phase transformation is detected in the as-cast/rolled specimen. However,the structural stability of the glass against plastic deformation is worse after pre-annealing,indicated by nanocrystallization in preannealed/rolled specimens with large deformation degrees. Moreover,with increasing deformation degree,the free-volume content in a pre-annealed/rolled specimen increases at a lower average rate than that in an as-cast/rolled specimen.     

Cold-state spout-fluidizing characteristics of high-carbon ferromanganese powders

The spout-fluidizing characteristics of high-carbon ferromanganese powders with different sizes and masses were studied via a plexiglass spout-fluidized bed with an inner diameter of 30 mm and a height of 1000 mm. The relationships between bed voidage and such parameters as bed height, particle size, fluidizing air velocity, and air flow were obtained. Experimental results show that the powder material with high density can be fluidized in the spout-fluidized bed where the particle size is a key factor influencing the quality of fluidization.     

Tert-butylhydroquinone-decorated graphene nanosheets and their enhanced capacitive behaviors

In the present work,tert-butylhydroquinone(TBHQ) was used to decorate graphene nanosheets to obtain a novel and environmentally friendly electrode material for supercapacitors.The fast redox reactions between hydroquinone and quinone generate pseudocapacitance.Graphene layers which have adsorbed TBHQ interact with each other to construct a three-dimensional network.Through this network,electrolyte ions can easily access the surface of graphene to generate electric double-layer capacitance.Electrochemical measurements have shown that using TBHQ as a redox modifier of graphene can obtain a maximum value of 302 F g-1 and provide a 51% enhancement in specific capacitance.Furthermore,excellent rate capability and cycling ability are achieved using the TBHQ-decorated graphene nanosheet electrode.     

Electrochemical behavior of different shelled microcapsule composite copper coatings

Copper/liquid microcapsule composite coatings with polyvinyl alcohol (PVA), gelatin or methyl cellulose (MC) as shell materials were prepared by electrodeposition. The influence of shell materials on the corrosion resistance of the composite coatings in 0.1 M H₂SO₄ was investigated by means of electrochemical techniques, scanning electron microscopy (SEM), and energy dispersion spectrometry (EDS). The results show that the participation of microcapsules can enhance the corrosion resistance of the composite coatings compared with the traditional copper layer. Based on the analysis of electrochemical test results, the release ways of microcapsules were deduced. Gelatin and MC as the shell materials of microcapsules are easy to release quickly in the composite coating. On the contrary, the releasing speed of PVA microcapsules is relatively slow due to their characteristics.     

Stress corrosion cracking and its anisotropy of a PZT ferroelectric ceramics

It is known that some types of ceramics, like Al2O3 and ZrO2, undergo stress corrosion cracking (SCC) or static fatigue fracture under static loading, ever in a rela-tively mild environment, such as moist atmosphere or water at room temperature, which leads to a time-dependent fracture[1—4]. For a transmission electron microscopy specimen of YBa2Cu3O7-x ceramics superconductor, SCC induced by residual stress can occur in an atmosphere with low moisture content[5]. For a lead zirconate ti…     

Temperature variations on the Tibetan Plateau over the last two millennia

The paleoclimate data recovered from ice cores,tree rings and lake sediments indicate regional features of cfimatic change on the Tibeta n Plateau (TP) during the last 2000 years. The composite temperature reconstructions in-dicate that several main climatic episodes, such as the “LittleIce Age“ between 1400 and 1900, the “Medieval Warm Pe-riod“ in 1150-1400, a less warm period in 800-1100, and an earlier cold period between the 3rd and 5th centuries,occurred in the TP. In addition, temperature varied from region to region. The period from AD 800 to 1100, which waswarm in northeastern TP, was contemporaneous with cool-ing in the western and southern TP. The southern TP ex-perienced warming between 1150 and 1400. For western TP,the δ^18O records of the Guliya ice core indicate that the pe-Hod 1250-1500 witnessed a clear warming. Large-scaletrends in the temperature history from northeastern TP aremore similar to those in eastern China than are the trendsfrom the Guliya ice cap far to the west and southern TP. The most prominent similarities between the temperature varia-tions of the TP and eastern China are such cold phases as 1100-1150, 1500-1550, 1650-1700 and 1800-1850, andthe latter three cold events match with three widespreadg lacial advances which occurred on the TP during the Little Ice A2e.     

Time-division phase modulated single-photon interference in a Sagnac interferometer

We introduce a stable, long-distance singlephoton Sagnac interferometer, which has a balanced configuration to efficiently compensate phase drift caused by change of the fiber-optic path. By using time-division phase modulation, single-photon interference was realized at 1550nm in a 5-km-long as well as 27-km-long Sagnac fiber loops,with a fringe visibility higher than 90% and long-term stability. The stable performance of the single-photon interference indicated that the time-division phase-modulated Sagnac interferometer might readily lead to practical applications in single-photon routing and quantum cryptography.