Swelling behaviors and pervaporation properties of CA/PAN composite membranes for separation of caprolactam/water mixtures

The composite membranes with cellulose acetate (CA) as the separating layer material and polyacrylonitrile (PAN) as the supporting layer material were prepared for separating caprolactam (CPL) from CPL/water mixtures by pervaporation technique. The swelling experiments were carried out to investigate the effects of swelling time and CPL concentration on the degree of swelling. The results showed that the CA membrane reached swelling equilibrium within 24 h, and the degree of swelling first slightly decreased then increased with the increase of CPL concentration in the feed under the experimental conditions. Respectively comparing flux with permeance, and separation factor with selectivity, we found out that the separation performance of the CA/PAN composite membrane is more strongly dependent on its hydrophilic/hydrophobic nature as well as on the effects of operating parameters, such as feed composition concentration and feed temperature.     

Biomimetic fluorapatite films for conservation of historic calcareous stones

Fluorapatite protective films were prepared on marble substrates using a biomimetic method. By mimicking the mineralization mechanism of enamel, phosphorus and fluorine were introduced on the surface of the marble substrate. In the presence of a biological template, namely collagen, an integrated fluorapatite film was produced and the marble substrate was entirely covered. The prepared fluorapatite films were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy dispersive X-ray (EDX) spectroscopy. The performances of the fluorapatite films were evaluated by color changes, capillary water absorption, and acid resistance tests. The results revealed that the fluorapatite films had good compatibility with the marble substrate; the physical properties such as color and capillary water adsorption of the marble substrates were unchanged. The fluorapatite films also had good acid resistance and were stable even in heavy acid rain.     

Changes in the power spectrum of electrical signals in maize leaf induced by osmotic stress

To quantify the characteristics of the power spectrum of plant electrical signals, we defined the following concepts:spectral edge frequency (SEF), spectral center frequency (SCF), power index (PI) and power spectral entropy (PSE). These parameters were used to examine and quantify changes in the power spectrum of electrical signals in maize leaves under osmotic stress. In the absence of osmotic stress, the SEF of the electrical signal in maize leaves was approx. 0.2 Hz and the SCF was approx. 0.1 Hz. The electrical signal in maize leaves was mainly a slow wave signal with a frequency of 0-0.1 Hz. After 2 h osmotic stress, the SEF and SCF of the electrical signal increased to higher frequencies. The proportion of the fast wave frequency also increased to 0.1-0.2 Hz, resulting in a dramatic increase in PSE. We also found that the changes in PSE and SCF were significantly correlated during osmotic stress. We propose that the changes in the PSE and SCF in maize leaves can be used as a sensitive signal indicating water deficit in leaf cells under osmotic stress. Thus, measurement of SCF or PSE of electrical signals in maize leaves could be used to develop early warning and rapid diagnosis techniques for the water demands of plants.     

A model-based calibration method of automotive electronic control unit

This paper presents a systematic method of designing the calibration toolbox of automotive electronic control unit (ECU) based on real-time workshop (RTW). To break the strong coupling of each functional layer, the hierarchical architecture of the calibration system is divided into the bottom driver layer, the intermediate interface layer and the top application layer. The driver functions meeting the specification of the automotive open system are sent and received in the intermediate interface layer. To reduce the development costs, the portable user codes are generated by RTW which provides a development environment from system simulation to hardware implementation. Specifically, the calibration codes yielded from the controller area network (CAN) calibration protocol (CCP) module are integrated into the control codes, called by a compiler in the daemons to build a corresponding project, and then downloaded into the object board to provide the A2L file. The experiments illustrate that the different drive modules are only needed to be replaced for the implementation of the calibration system applied in different hardware platforms.     

Sequence similarity analysis of non-self CTL epitopes and mouse proteins using sequence alignment

This research analyzed amino acid sequence similarity between non-self T cell epitopes recognized by mouse antibodies and mouse proteins. Using sequence alignment,we found that only 8 of 1 108 epitopes are highly similar to mouse protein sequences. The result shows that non-self T cell epitopes are not similar or have little similarity to mouse protein sequences. Furthermore,reviewing the related literature,we also found that the eight epitopes would trigger immune responses in some particular environment,which are ignored by T cells in normal condition. The result suggests that no or low-similarity peptide vaccines can reduce the chance of collateral cross-reactions and enhance the antigen-specific immune response to vaccine.     

Growth characteristics of directionally solidified Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/YAG/ZrO<Subscript>2</Subscript> ternary hypereutectic <Emphasis Type="Italic">in situ</Emphasis> composites under ultra-high temperature gradient

Oxide eutectic ceramic in situ composites have attracted significant interest in the application of high-temperature structural materials because of their excellent high-temperature strength, oxidation and creep resistance, as well as outstanding microstructural stability. The directionally solidified ternary Al₂O₃/YAG/ZrO₂ hypereutectic in situ composite was successfully prepared by a laser zone remelting method, aiming to investigate the growth characteristic under ultra-high temperature gradient. The microstructures and phase composition of the as-solidified hypereutectic were characterized by using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD). The results show that the composite presents a typical hypereutectic lamellar microstructure consisting of fine Al₂O₃ and YAG phases, and the enriched ZrO₂ phases with smaller sizes are randomly distributed at the Al₂O₃/YAG interface and in Al₂O₃ phases. Laser power and scanning rate strongly affect the sample quality and microstructure characteristic. Additionally, coarse colony microstructures were also observed, and their formation and the effect of temperature gradient on the microstructure were discussed.     

Electrochemical performance of high purity zinc and Zn-Al-Cd alloy as reference electrodes

The effects of Cl-concentration,temperature,pH,flow velocity,soluble oxygen content of seawater and anodic current on the potential of high purity zinc and Zn-Al-Cd reference electrodes were investigated. The results show that the investigated metal materials are liable to establish stable potential and act as reference electrodes in seawater,diluted seawater and urban tap water. Cl-concentration,temperature,seawater flow velocity and anodic current have an obvious effect on zinc potentials. However,seawate...     

Sedimentation processes and sedimentary characteristics of tidal bores along the north bank of the Qiantang Estuary

A tidal bore is a unique Earth surface process, characterized by its highly destructive energy, predictable periodicities and magni-tudes, and the production of characteristic sedimentary features. Tidal bores and associated rapid flood flows are highly turbulent flows of the upper-flow regime with a velocity over several meters per second. Reynolds (Re) and Froude (Fr) numbers, respectively, are larger than 104 and 1.0, making them significantly different from regular tidal flows but analogous to turbidity currents. Until now, understanding of tidal-bore depositional processes and products has been limited because of the difficulty and hazards involved with gauging tidal bores directly. The Qiantang bore is known as the largest breaking bore in the world. Field surveys were carried out in May 2010, along the north bank of the Qiantang Estuary to observe the occurrence of peak bores, including regular observations of current, water level and turbidity at the main channel. Several short cores were sampled on the intertidal flats to study the characteristic sedimentary features of tidal bores. Hydrodynamic and sedimentological studies show that the processes of sediment resuspension, transport and deposition are controlled primarily by the tidal bores, and the subsequent abruptly accelerated and decelerated flood flows, which only account for one tenth of each semidiurnal tidal cycle in the estuary. Tidal-bore deposits are generally poorly sorted because of rapid sedimentation after highly mixed suspension by intense turbulence. This behavior is characteristic of the absence of tractive-current depositional components in a C-M diagram. It also goes along with well-developed massive bedding, graded bedding, basal erosion structures, convolute bedding and dewatering structures. Together, these sedimentary features can constitute fingerprinting of turbidites, widely distributed in the deep-water environment. However, a tidal bore is triggered by intensely deformed tidal waves propagating into a shallow-water environment, which returns to regular tidal flows rapidly after the passage of the bore head. The tidal-bore deposits are usually bounded by the intertidal-flat deposits with typical tidal beddings at the top and on both flanks. The difference between tidal-bore deposits (TBD) and tidal sandy/muddy deposits (TSD/TMD) is evident not only in sedimentary structures, but also in the grain-size composition. They can be clearly distinguished in grain-size bivariate plots, typically the plot of mean grain size vs. standard deviation (or sorting). Some trend variations generally exist in mean grain size with TBD>TSD>TMD, sorting with TMD>TBD>TSD (larger value indicating poorer sorting), and both skewness and kurtosis with TSD>TBD>TMD. These findings will undoubtedly shed new light on our understanding of tidal-bore sedimentology, ancient tidal-bore sedimentary facies and environments, and related oil-and-gas field prospecting.     

<Emphasis Type="Italic">In situ</Emphasis> measurement of PM<Subscript>1</Subscript> organic aerosol in Beijing winter using a high-resolution aerosol mass spectrometer

Organic aerosol (OA) is a crucial component of atmospheric fine particles. To achieve a better understanding of the chemical characteristics and sources of OA in Beijing, the size-resolved chemical composition of submicron aerosols were measured in-situ using a High-Resolution Time-of-Flight Aerosol Mass Spectrometer in the winter of 2010, with a high time resolution of 5 min. During this study, the mean OA mass concentration was 20.9±25.3 μg/m3, varying between 1.9 and 284.6 μg/m3. Elemental analysis showed that the average H/C, O/C and N/C (molar ratio) were 1.70, 0.17, and 0.005, respectively, corresponding to an OM/OC ratio (mass ratio of organic matter to organic carbon) of 1.37. The average mass-based size distributions of OA present a promi- nent accumulation mode peaking at approximately 450 nm. The prominent presence of ultrafine particles (Dva < 100 nm) was mainly from the fresh emissions of combustion sources. A Positive Matrix Factorisation (PMF) analysis of the organic mass spectral dataset differentiated the OA into three components, including hydrocarbon-like (HOA), cooking-related (COA), and oxygenated (OOA) organic aerosols, which, on average, accounted for 26.9%, 49.7% and 23.4%, respectively, of the total organic mass. The HOA and COA likely corresponded to primary organic aerosol (POA) associated with combustion-related and cooking emissions, respectively, and the OOA components corresponded to aged secondary organic aerosol (SOA).     

On the Strong Law of Large Numbers for Non-Independent B-Valued Random Variables

This paper investigates some conditions which imply the strong laws of large numbers for Banach space valued random variable sequences. Some generalizations of the Marcinkiewicz- Zygmund theorem and the HoffmannJφrgensen and Pisier theorem are obtained.