国际单项体育联合会善治评价体系构建及其实证研究

基于治理理论和委托—代理模型,本研究以35 个国际单项体育联合会善治 评价为对象,设计了以透明度、程序民主、制衡、团结等维度作为关键维度的指标体系, 并使用文献资料法、问卷调查法和访谈法等方法,对数据进行搜集整理。研究发现,国 际单项体育联合会平均得分为45.5（满分100）,善治状况评价为“一般”,决策和工作 机制不透明、选举和工作程序失范、利益相关者参与不足等,导致组织内部投机主义盛 行,国际单项体育联合会合法性面临危机。研究建议：1）严格执行选举程序,健全主席 和高管资格审查机制;2）完善信息公开制度,提升组织透明度;3）规范工作流程,充 实组织行政程序正当性;4）多元主体参与,健全组织内外部审查制度;5）明确最长任 期,保证组织官员积极性。     

Nanoengineering of amino - functionalized mesoporous silica nanospheres as nanoreactors

Selective functionalization of mesoporous silica nanospheres (MSNs) is crucial for nanoengineering of MSNs. Herein, we have combined “surface-protected etching strategy” and “cationic surfactant assisted etching strategy” to prepare functionalized MSNs with externally attached amino groups. The externally attached NH2 groups endow the catalysts with excellent catalytic performance for nitroaldol reaction between nitromethane and benzaldehyde. In addition, those NH2-MSNs can also be used to support gold nanoparticles, which display very good catalytic performance for reduction of 4-nitrophenol. It can be envisioned that the synthesis protocol developed in this work could also be extended to nanoengineered MSNs, which provides opportunities for nanoreactors design.     

Effect of cold rolling process on microstructure and mechanical properties of high strength β titanium alloy thin sheets

The microstructure and mechanical properties of Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe high strength titanium alloy sheets prepared by unidirectional cold rolling and two-step cross cold rolling were investigated. Results showed that the β phase grains were refined significantly by cold rolling followed by solution treatment for a short time.Compared to unidirectional cold rolling, the short time solution treatment after two-step cross rolling could significantly reduce the non-uniformity of the microstructure of the alloy sheets. After aging treatment at 550 ℃,the anisotropy of the mechanical properties still existed in the unidirectional rolled sheets, and the tensile strength was highest along the rolling direction. After solution and aging treatment, the anisotropy of the mechanical properties of the two-step cross rolling process sheet was not obvious than unidirectional cold rolling,and alloy had good strength and plasticity matching.     

The influence of anthropogenic climate change on wet and dry summers in Europe

Understanding the role of anthropogenic forcings in regional hydrological changes can help communities plan their adaptation in an informed manner.Here we apply...     

BEM Analysis of Wave Propagation in a Water-Filled Borehole in an Anisotropic Solid

This paper describes a time-domain boundary element method developed to analyze the interactions of acoustic and elastic waves near the interfaces between water and an anisotropic elastic solid. Two models are analyzed with one being the interface between two half spaces of fluid and solid and the other being a fluid region sandwiched by half space domains of anisotropic elastic solids. Both monopole and dipole point sources are used to generate an initial pressure wave in the fluid. Some snapshots of the transient wave behavior near the fluid-solid interfaces are given. The effect of the anisotropy in the solid on the pressure waveforms in the fluid is discussed. The numerical results allow detailed arrival identification and interpretation of acoustic and elastic waves propagating along the fluid-solid interfaces.     

Growth mechanisms of Ag and Cu nanodendrites via Galvanic replacement reactions

Dendritic silver and copper crystals were produced via Galvanic replacement reactions on zinc and aluminum plates, respectively. The growth orientations of these metals were determined using electron microscopy. The results showed that a fast crystal growth associated with a high concentration of metal cations led to kinetically controlled growth along the <112> axes of the cubic close-packed structures. However, a slow growth rate resulted in thermodynamically controlled growth along the ...     

实验测得的C2-C6二元羧酸溶液的冻结温度:冰核核化过程中的重要指标

由于大气气溶胶影响着地球辐射总量的平衡与能量的估算, 有机化合物作为气溶胶和云凝结核(cloud condensation nuclei, CCN)的重要组成成分, 其重要性已经越来越引起科学家们的重视. 而低分子量二元羧酸(low molecular weight dicarboxylic acids, LMWDCA)作为大气(包括云和雾)中气溶胶的重要成分,其在大气中的传输与转化过程中的作用尤其是对冰核(ice nuclei, IN)核化过程的影响已经成为当前的一个重要的前沿科学研究领域. 本研究利用麦吉尔大学的冻结核记数仪分别测量了不同pH的水溶液(超纯净水与自来水)中单纯态的与混合态的低分子量二元羧酸(C2-C6)液滴的冻结温度. 结果显示, 低分子量二元羧酸(C2-C6)自来水溶液的冻结温度明显的高于其相应的超纯净水溶液. 不同混合态的二元羧酸(C2-C6)的纯净水和自来水溶液液滴的平均冻结温度范围分别是: (-24.1±2.8)~(-21.3±3.9)℃和(-10.2±2.2)~(-9.5±2.2)℃, 而所测对照水(超纯净水与自来水)溶液液滴的平均冻结温度则分别是(-22.6±3.5)和(-11.2±2.4)℃. C2-C6二元羧酸的加入对于水溶液液滴的冻结温度增高的促进作用并不显著.     

Application of Method-of-Lines to Charging-Up Process in Pipelines with Entrapped Air

Introduction The initial charging-up process is an important opera-tion in an intermittent,undulating pipeline system.Re-cently,the charging-up process has received attention with the aim of predicting the effective duration of supply in different regions…     

Heat Transfer Enhancement Due to Marangoni Flow Around Moving Bubbles During Nucleate Boiling

Introduction Nucleate boiling has always been an important heat transfer mechanism in many fields, such as energy utilization, manufacturing processes, and chemical processing and nucleate boiling continues to find new applications in many new areas, such…     

SUS441不锈钢/Al金属间化合物微叠层复合板的界面结构与力学性能

采用“表面预处理—交替层叠—热轧复合—热处理”的工艺流程制备了SUS441不锈钢/Al金属间化合物微叠层复合板。利用光学显微镜、X射线衍射仪、扫描电子显微镜等检测与表征方法研究了热处理温度对复合板界面形貌、微观组织、物相组成、维氏硬度、拉伸性能的影响。结果表明：复合板界面结合良好;热处理后,固–液反应界面氧化严重,易导致界面分层而开裂;固–固、固–半固、固–液热处理后,金属间化合物层由均匀层和两相层组成,均匀层的物相组成为Fe₂A1₅,两相层的物相组成为Fe₄Al₁₃和Al₁₃Cr₂,且两相层具有韧性特征,固–半固反应所得到的复合板的综合力学性能最佳。