1800mm虚拟轧机板形控制性能

定义了评价轧机板形控制性能的六项指标,包括承载辊缝凸度调节域、辊缝横向刚度、板形调控功效曲线、边缘降、辊间接触压力平均幅值和辊间接触压力分布不均匀度.建立了HC,CVC,PC和DSR系列轧机的有限元仿真模型,并从板形控制性能的六项指标方面分析了当前国际上流行的各种机型的特点.     

纤维对PEI改性环氧树脂单向复合材料形态的影响

人们改善环氧树脂基复合材料的脆性通常只改善环氧树脂基体和增强纤维间的界面，提高环氧树脂韧性的另一种常用方法是添加初始相容性良好的热塑性树脂如聚醚酰亚胺，在某一转化率（取决于体系的组成和反应温度）时体系发生相转变，体系最终的形态由相转变速率和环氧树脂反应速度所控制。本文作者研究了两种增强纤维（玻璃纤维和碳纤维）对不同环氧树脂／聚醚酰亚爱体系形态形成的影响，结果发现体系中纤维的存在不会影响基体相分离过程，但会改变体系的最终形态；形态的变化与纤维的品种关系不大；基体中不同组分的粘度是影响复合材料形态形成的关键因素。     

Advances and applications of electrohydrodynamics

Electrohydrodynamics (EHD) has been applied in many areas, such as EHD enhanced heat transfer, EHD pump, electrospray mass spectrometry, electrospray nanotechnology, etc. The basic theories underlying these applications and a brief review of the EHD advances are presented in this paper. As electrospray is an important branch of EHD,the applications of electrospray are particularly discussed.Finally, this paper gives some suggestions for the future research and development.     

衰荡腔光谱技术检测混合气体中甲醛含量

利用光参量振荡技术产生2.2~3.97μm的宽调谐窄线宽中红外相干辐射.采用该中红外光源和衰荡腔光谱技术建立了一痕量气体成分光谱检测系统,并使用该系统对混合气体中的甲醛成分进行了测量,得到了72×10-9的检测灵敏度.整个光谱检测系统具有很好的光谱分辨率、选择性以及测量灵敏度,适用于大气中多种污染或温室效应气体成分的检测.     

Design and fabrication of 1-D semiconductor nanomaterials for high-performance photovoltaics

To date, the cost-effective utilization of solar energy by photovoltaics for large-scale deployment remains challenging. Further cost minimization and efficiency maximization, through reduction of material consumption, simplification of device fabrication as well as optimization of device structure and geometry, are required. The usage of 1D nanomaterials is attractive due to the outstanding light coupling effect, the ease of fabrication, and integration with one-dimensional(1-D) semiconductor materials. The light absorption efficiency can be enhanced significantly, and the corresponding light-toelectricity conversion efficiency can be as high as their bulk counterparts. Also, the amount of active materials used can be reduced. This review summarizes the recent development of 1-D nanomaterials for photovoltaic applications, including the anti-reflection, the light absorption,the minority diffusion, and the semiconductor junction properties. With solid progress and prospect shown in the past 10 years, 1-D semiconductor nanomaterials are attractive and promising for the realization of high-efficiency and low-cost solar cells.     

超凸度量空间中的极大极小不等式和拟变分不等式

用连续迭取方法得到了超凸距离空间上集值映射的一个不动点定理。作为应用，给出了超凸距离空间中的一个极小极大定理和广义拟变分不等式解的一个存在性定理。     

Synthesis of Ta C and Ta_2C from tantalum and graphite in the laser-heated diamond anvil cell

The pressure dependence of the onset of the formation of Ta C and Ta2 C from the elements has been investigated by in situ X-ray diffraction and pyrometry.Ta C has been synthesized by the reaction of Ta and graphite at pressures between 8.6 and 14.3 GPa and at temperatures up to 2,300 K using a laser-heated diamond anvil cell. The products were characterized by X-ray diffraction. Ta and graphite begin to react around 1,100 K at ambient pressure conditions, and the reaction temperature increases with increasing pressure. A linear extrapolation of these data is consistent with recent observations of the formation of Ta C at 90 GPa and 3,600 K. We show that diffusion of carbon into tantalum significantly changes the lattice parameter of up to 2 % in the pressure range of up to19 GPa. In some experiments, Ta2 C was formed concomitantly. The experimentally determined bulk modulus of Ta2 C is B0;exp：= 286（5） GPa. Other tantalum carbide phases were not observed.     

基于中期基准面旋回变化的沉积微相精细研究——以松辽盆地扶余油田泉四段为例

 从区域沉积背景出发,以岩心和测井资料分析为基础,对松辽盆地扶余油田泉四段的岩石类型、粒度分布、沉积构造、泥岩颜色及地球化学特征等各类沉积相标志进行分析,确定其为三角洲沉积,包含三角洲平原和前缘亚相。其中,平原亚相可识别出分支河道、决口扇、天然堤、废弃河道、湖泊沼泽微相;前缘亚相可细分为水下分支河道、河口坝、远沙坝、水下天然堤和支流间湾等微相。依据沉积微相与地层格架的成因关系,在中期基准面旋回的控制下应用取心关键井建立了沉积微相的定量识别图板,对非取心井进行沉积微相的定量识别与划分,并在此基础上绘制了沉积微相的平面及剖面图,总结了微相类型的平面和纵向展布规律及其与含油性的关系,指出分支河道砂体发育规模、连续性、储集性、含油性最好,其次为河口坝砂体,为研究区下一步的开发方案提供地质依据。     

标量FDTD法分析渐变折射率光波导模场分布

用标量时域有限差分法（Finite-differece Time-domain Method,FDTD法）分析了渐变折射率平面光波导中基模的模场分布情况，采用平面光波、球面光波、高斯光波等5种不同形态的光波激励同一波导，借助计算机进行数值求解，得到的光场分布图在光场传播达到稳定后完全相同，说明波导的模式与光波形态无关，只与波导结构和光波波长有关，结果表明该方法直观、精确、快速，并与解析法分析的结果一致。     

空调用多翼离心风机叶轮的性能预估

采用二维粘性数值模拟方法对三个不同参数的空调用多翼离心风机叶轮进行了数值计算，分析了空调用多翼离心叶轮的内部流场，预估比较了三个叶轮的风量静压性能．预估结论与试验结果相符，说明了在空调用多翼离心风机设计中可以采用数值模拟技术对叶轮性能进行预估，以减少实物模型试验，缩短产品开发周期，降低产品开发成本。