Machining studies of die cast aluminum alloy-silicon carbide composites

Metal matrix composites (MMCs) with high specific stiffness, high strength, improved wear resistance, and thermal properties are being increasingly used in advanced structural, aerospace, automotive, electronics, and wear applications. Aluminum alloy-silicon carbide composites were developed using a new combination of the vortex method and the pressure die-casting technique in the present work. Machining studies were conducted on the aluminum alloy-silicon carbide (SiC) composite work pieces using high speed steel (HSS) end-mill tools in a milling machine at different speeds and feeds. The quantitative studies on the machined work piece show that the surface finish is better for higher speeds and lower feeds. The surface roughness of the plain aluminum alloy is better than that of the aluminum alloy-silicon carbide composites. The studies on tool wear show that flank wear increases with speed and feed. The end-mill tool wear is higher on machining the aluminum alloy-silicon carbide composites than on machining the plain aluminum alloy.     

A comparative study of magnetic properties between whole cells and isolated magnetosomes of <Emphasis Type="Italic">Magnetospirillum magneticum</Emphasis> AMB-1

The magnetic properties of magnetosome magnetite are of interdisciplinary interest because magnetosomes are potential carriers of natural remanent magnetization and paleoenvironment, as well as novel nano-biomaterials in biotechnological and biomedical applications. We carried out magnetic and electron transmission microscopy analyses of fresh Magnetospirillum magneticum AMB-1 whole cells and isolated magnetosomes. Results revealed that AMB-1 synthesized single-domain magnetite magneto-somes, which are arra...     

A preliminary study of chronology for a newly-discovered ancient city and five archaeological sites in Lop Nor,China

In the past century, it has long been debated in the archeological, historical, geographical, and many other related communities where the capital of the Luolan and Shanshan states was in the Lop Nor region. This paper presents three AMS radiocarbon ages from a newly-discovered ancient city at about 6.3 km to the northwest of the Xiaohe Graveyard, and fifteen new radiocarbon ages from the Loulan (LA), LE, Qieerqiduke, Milan, and Tuyin sites in Lop Nor. The new investigation shows that the age of newly-disco...     

Synthesis and supercapacitor characteristics of PANI/CNTs composites

The polyaniline coated multi-walled carbon nanotubes (PANI/CNTs) composites were synthesized by in situ polymerization. The microstructure and component of the composites were characterized by scanning electron microscope (SEM), Fourier transfer infrared spectroscopy (FTIR), X-ray diffraction (XRD), and N2 adsorption BET. The electrochemical performances of the samples were tested by cyclic voltammogram (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charge/discharge. The results showed...     

Crust-mantle coupling in North China: Preliminary analysis from seismic anisotropy

Data from the CASN (Capital Area Seismograph Network), NSNC (National Seismograph Network of China), and IRIS (Incor-porated Research Institutions for Seismology) are compared with data from a temporary North China Seismic Array to obtain the background orientation of the horizontal crustal principal compressive stress at NE 95.1°±15.4° in North China. Data are corrected for disturbances of faults and irregular tectonics, and are used to constrain the fast SKS polarization at NE 110.2°±15.8° in North China. Individual station analyses suggests that there is consistently more than 10° difference between the polarizations of fast shear-wave in the crust and those of fast SKS phases. Azimuthally anisotropic phase velocities of Rayleigh waves at different periods also indicate an orientation change for fast velocity with depth. It suggests the crust-mantle coupling in North China follows neither the simple decoupling model nor the strong coupling model. Instead, it is possibly some inhomogeneous combination of two models or some gradual-change model of physical characteristics. This study shows that anisotropy in the crust and mantle could be multiply characterized more correctly and crust-mantle coupling could be analyzed further, if increasing near-field shear-wave splitting data that indicate crustal anisotropy, combined with the azimuthal anisotropy of Rayleigh waves, besides the result of SKS splitting travelling through lithosphere and surface GPS measurements.     

First observation of mesospheric and thermospheric winds by a Fabry-Perot interferometer in China

A Fabry-Perot interferometer, funded by the Meridian Project in China, was deployed at the Xinglong station (40.2°N,117.4°E) of the National Astronomical Observatories in Hebei Province, China. The instrument has been operating since April 2010, measuring mesospheric and thermospheric winds. The first observational data of winds at three heights in the mesosphere and thermosphere were analyzed, demonstrating the capacity of this instrument to aid basic scientific research. The wavelengths of three airglow emissions were OH892.0, OI 557.7, and OI 630.0 nm, which corresponded to heights of 87, 98, and 250 km, respectively. Three 38-day data sets of horizontal winds, from April 5, 2010 to May 12, 2010, show clear day-to-day variations at the same height. The minimum and maximum meridional winds at heights of 87, 98, and 250 km were –16.5 to 8.7 m/s, –24.4 to 15.9 m/s, and –43.6 to 1.5 m/s. Measurements of zonal winds were –5.4 to 7.6 m/s, 2.3 to 23.0 m/s, and –22.6 to 49.3 m/s. The average data from the observations was consistent with the data from HWM93. The wind data at heights of 87 and 98 km suggest a semi-diurnal oscillation, clearly consistent with HWM93 results. Conversely there was a clear discrepancy between the observations and the model at 250 km. In general, this Fabry-Perot interferometer is a useful ground-based instrument for measuring mesospheric and thermospheric winds at middle latitudes.     

Fabrication and characterization of 3D scaffold using 3D plotting system

In this paper, we design and fabricate a 3D scaffold using rapid prototyping (RP) technology for tissue engineering. The scaffold should have a three-dimensional interconnected pore network. We fabricate a polycaprolactone (PCL) scaffold with interconnecting pores and uniform porosity for cell ingrowth using a 3D plotting system. In order to keep the three dimensional shape under mechanical loading while implanted, we design an oscillating nozzle system to increase elastic modulus and yield strength of PCL ...     

Restricted allowable generalized quantum gates

An allowable generalized quantum gate (introduced by Long, Liu and Wang) has the form of U = Σ _k=0 ^d−1 c _k U _k , where U _k’s are unitary operators on a Hilbert space H and |Σ _k=0 ^d−1 c _k |⩽1 and |c _k |⩽1 (0⩽k⩽d−1). In this work we consider a kind of AGQGs, called restricted allowable generalized quantum gates (RAGQGs), satisfying 0 < Σ _k=0 ^d−1|c _k |⩽1. Some properties of the set RAGQG(H) of all RAGQGs on H are established. Especially, we prove that the extreme points of RAGQG(H) are exactly unitary operators on H and that B(H)=R ⁺ RAGQG(H).     

Study on the micro-region structure and properties of two dithienothiophene-dicarboxylic acids

Self-organized dithieno [3,2-b:2',3'-d] thiophene-2,5-dicarboxylic acid (A) and dithieno [2,3-b:3',2'-d] thiophene-2,5-dicarboxylic acid (B) films were prepared through solvent-induced order-disorder transition method.The arrangement of the two molecules on substrates were observed by atomic force microscopy (AFM),which demonstrated that A was arranged orderly in a certain angle on mica,while B was flat-flying on mica.The optical and conductance properties in micro region of these two compound films were ch...     

Effect of wing planform on leading-edge vortex structures

Flow visualization experiments are conducted in water tunnel for low aspect ratio cropped wings at low Reynolds number. The experimental results show that the model sweep angle Λ influences the formation and development of the leading-edge vortex. For wings with Λ =0°, the dominant flow structure is transverse vortex. When Λ≥26°, the dual vortex structure can be observed at some angles of attack, and it is confirmed that the dual vortex is a special structure for flow over low aspect ratio wing at low Reyno...