Mechanism of brittle-ductile transition of a glass-ceramic rigid substrate

The hardness, elastic modulus, and scratch resistance of a glass-ceramic rigid substrate were measured by nanoindentation and nanoscratch, and the fracture toughness was measured by indentation using a Vickers indenter. The results show that the hardness and elastic modulus at a peak indentation depth of 200 nm are 9.04 and 94.70 GPa, respectively. These values reflect the properties of the glass-ceramic rigid substrate. The fracture toughness value of the glass-ceramic rigid substrate is 2.63 MPa·m1/2. The material removal mechanisms are seen to be directly related to normal force on the tip. The critical load and scratch depth estimated from the scratch depth profile after scratching and the friction profile are 268.60 mN and 335.10 nm, respectively. If the load and scratch depth are under the critical values, the glass-ceramic rigid substrate will undergo plastic flow rather than fracture. The formula of critical depth of cut described by Bifnao et al. is modified based on the difference of critical scratch depth     

Design and fabrication of superconducting HEB mixer

This paper describes the design and fabrication of superconducting hot electron bolometer （HEB） mixer based on ultra-thin superconducting NbN films. The high quality films were epitaxially grown on high resistance Si substrates. The device was fabricated by magnetron sputtering, electron beam lithography （EBL）, reactive ion etching （RIE）, lithography, and so on. The device＇s resistance-temperature （R-T） curves and current-voltage （I-V） curves were studied. The results of THz response of the device are presented. Y-factor technique was used to measure the device＇s noise temperature. When the device was irradiated with a laser radiation of 2.5 THz, the obtained lowest noise temperature of the device was 2213 K.     

Development of a middle and low latitude theoretical ionospheric model and an observation system data assimilation experiment

On the basis of previous work, we develop a middle and low latitude theoretical ionospheric model in this paper, named Theoretical Ionospheric Model of the Earth in the Institute of Geology and Geophysics, Chinese Academy of Sciences （TIME-IGGCAS）. TIME-IGGCAS solves the equations of mass continuity, motion and energy of electron and ions self-consistently and uses an eccentric dipole field approximation to the Earth＇s magnetic field. We combine the Eulerian and Lagrangian approaches in the model and take account of the plasma ExB drift velocity. Calculation results reveal that the model is steady and credible and can reproduce most large-scale features of ionosphere. By using TIME-IGGCAS, we carried out an observation system data assimilation experiment. Assimilation results show that the ExB drift velocity can be accurately estimated by ingesting the observed foF2 and hmF2 into the model applying nonlinear least-square fit method. We suggest that this work is of great significance in the development of ionospheric data assimilation model to give better nowcast and forecast of ionosphere.     

An Improved Identity-Based Society Oriented Signature Scheme with Anonymous Signers

In this paper, we present an improved identity-based society oriented signature scheme with anonymous signers, which satisfies： （1） when members leave or join an organization, the public verification key and the signature verification procedure are unchanged; （2） a user participates in several organizations at the same time, her secret key is only related with her identity. However, no previous schemes have these two properties.     

Development and application of flexible substrate sensors in instantaneous heat flux measurement

A new type of sensor with the flexible substrate is introduced. It is applicable in measuring instantaneous heat flux on the model surface in a hypersonic shock tunnel. The working principle, structure and manufacture process of the sensor are presented. The substrate thickness and the dynamic response parameter of the sensor are calculated. Because this sensor was successfully used in measuring the instantaneous heat flux on the surface of a flat plate in a detonation-driven shock tunnel, it may be effective in measuring instantaneous heat flux on the model surface.     

C-isotope composition and correlation of the Upper Neoproterozoic in Keping area, Xinjiang

C-isotope analysis of the carbonates in the Upper Neoproterozoic in Keping, Xinjiang indicates that the Qigebrak Formation and the Upper Sugaitbrak Formation mainly record positive C-isotope values, and a distinct positive excursion occurs in the lower part of the Qigebrak Formation. There are three negative excursions in the boundary between the Qigebrak Formation and the Cambrian, the uppermost and lowermost Upper Sugaitbrak Formation. These characters resemble those of the Upper Neoproterozoic in the Three-Gorge area, which suggests that the Upper Sugaitbrak Formation and Qigebrak Formation can be correlated with the middle and upper parts of the Doushantuo Formation and Dengying Formation, respectively. The negative excursion at the top of the Upper Sugaitbrak Formation corresponds to that at the top of the Doushantuo Formation, while the negative excursion at the bottom of the Sugaitbrak Formation can be correlated with that at the middle part of the Doushantuo Formation in the Three-Gorge area and that at the top of the Hangelchaok diamictites in the Quruqtagh area.     

Solvent effects on photophysical properties of copper and zinc porphyrins

The photophysics of Zn（tetraphenylporphyrin,TPP）, Zn（tetra-2,4,6-trimethylphenyl porphyrin, TMP）, Zn （tetra-（o-dichlorophenyl） porphyrin, TPPCI8）, Cu（tetraphenylporphyrin,TPP）, Cu（tetra-2,4,6-trimethyl- phenyl porphyrin,TMP）, and Cu（tetra-（o-dichlorophenyl） porphyrin, TPPCIE, TPPCI8） in several solvents have been investigated on steady state and time-resolved spectroscopy. The Cu（TPPCI8 ） is normal and shows no evidence of CT transition in the visible or near UV regions in nonpolar solvent. However, Cu（TPPCI8）shows a blue shift in the absorption spectrum and intramolecular CT bands at absorption spectra in polar solvent, which shows a fluorescence maximum emission at 650 nm and 8.4 ns lifetime. The reason can be attributed to two points. Firstly, the increase of solvent polarity can enlarge outer reorganisational energy, which is favorable to reduce the activation free energy of charger-transfer transition based on Marcus theory of electron transfer. Moreover, the internal heavy-atom effect on Cu（TPPCIE） is encouraging to stabilize the 2T1 state also, which increases the possibility of population to CT band from 2T1 state. This result is in accord with an earlier estimate of a 10 ns lifetime and CT absorption at 640 nm bands for the CT state of Cu （11） octethylporphyrins. Other possible reasons arousing unusual fluorescence like H-bonding, axial ligands, molecular aggregation are excluded.     

Three-dimensional crustal velocity structure of P-wave in East China from wide-angle reflection and refraction surveys

The 3-D crustal structure of P-wave velocity in East China is studied based on the data obtained by wide-angle seismic reflection and refraction surveys.The results suggest that a deep Moho disconti-nuity exists in the western zone of the study region,being 35―48 thick.High-velocity structure zones exist in the upper crust shallower than 20 km beneath the Sulu and Dabie regions.The cause of high-velocity zones is attributable to high-pressure metamorphic(HPM) and ultra-high-pressure metamorphic(UHPM) terran...     

40-Gb/s all-optical digital 4-bit priority encoder employing cross-gain modulation in semiconductor optical amplifiers

High-speed all-optical logic circuits have attracted much attention because of their important roles in signal processing in next-generation optical networks.The digital encoder is widely used in binary calculation,multiplexing,demultiplexing,address recognition and data encryption.A priority encoder allows the existence of multiple valid inputs simultaneously,identifies the priority of the request signals and encodes the priority.We propose and experimentally demonstrate an all-optical 4-bit priority encoder for return-to-zero signals at 40 Gbit/s based on cross-gain modulation in semiconductor optical amplifiers.Detuning fil-ters after semiconductor optical amplifiers are employed to improve the output performance.Correct logic bit sequences and clear open eye patterns with extinction ratios exceeding 10 dB are achieved.     

Lasing on pyroclastic rocks: A case study of <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar dating on Moshishan Group,eastern Zhejiang Province

It is difficult to date pyroclastic rocks, for almost all the dating methods, due to the multiple sources during their formation. ^40Ar/^39gAr incremental heating results on groundmass selected from the samples show that the age spectra are meaningless geologically. However, singe crystal total fusions of CO2 lasing on the sanidine separates could yield rational 4^40Ar/^39Ar results and distinguish their sources in this study. Timing on three formations of the Moshishan Group, after avoiding the exotic and altered grains by lasing on the single sanidine separate, was reported in this paper. The lowermost portion of the Chawan Formation gives an age of 113.7±0.3 Ma; the lower part of the Xishantou Formation was formed 116.4±0.4 Ma ago and the bottom of the Gaowu Formation took its shape at 118.4±0.4 Ma. These new ages are much younger than the previous ones, suggesting that these thick volcanic formations had been formed in very short durations.