Predictability of Plastic Parts Behaviour Made from Rapid Manufacturing

One of the most important issues to resolve in parts manufactured from rapid manufacturing (RM) technologies is to know their behavior working under real conditions. Total quality manufacturing (TQM) is only possible if mechanical properties are well known in the design stage depending on the processing parameters. This work is mainly focused on testing of several samples made with different selective laser sintering (SLS) parameters and technologies. This procedure is the starting point to establish a basis for designing for RM and the standardization of RM testing. The experiments and the analysis of variance (ANOVA) analyzed the effects of several factors on mechanical properties. The SLS technologies were 3DSystem and EOS. The results show which factor has a large effect on the variables and the interaction between them. The conclusions are very useful for developing rules for designing (designing for RM) and creating new standard rules (ISO, AISI, and DIN) for RM materials and parts testing. The ANOVA gives a better knowledge of the effects of these factors and eliminates unimportant parameters.     

Effects of Electrochemical Treatment on the Superficial Properties of Rayon-based Carbon Fibers

The development of surface acidity on rayon-based carbon fibers during mild electrochemical treatment was investigated. Conductimetric titration was the primary method used to investigate the functionalities on the carbon fiber surface. The acidity on the surface of the untreated carbon fiber was very low, while for the treated fibers, the acidity increased significantly. Moreover, with the treatment extent proceeded, the acidity on the fiber surface also increased. SEM analysis shows electrochemical treatment under intense treatment degree caused considerable etch on the fiber surface. Cavities and grooves can be observed on the surface via the SEM microphotograph. While in a more mild treatment, electrochemical treatment didn't cause great etch on the surface of the fiber.     

中高碳钢堆焊技术的应用及研究进展

介绍了近年来堆焊技术在中高碳钢的应用和堆焊焊条的研制进展情况。     

对音乐速度差别感受阈限的研究

本实验用最小变化法测量音乐速度差别感受阈限。采用两段速度分别为=80和=120的标准音乐材料（教堂歌曲《Amazing Grace》和贝多芬《G大调小步舞曲》，Midi格式），用Finale Notepad 2008进行编辑，每一段标准音乐有10段速度渐变的对比刺激（渐变节拍分别为2和4），用Windows Media Player 11播放器播放标准音乐和对比音乐，让被试判断两者的速度有无差异。结果表明，对速度差别的感受阈限随着标准音乐材料的速度增加而提高，差异显著，验证了费希纳-韦伯定律；同时对人们生活．作曲家创作具有指导意义。     

二阶微分方程的两点边值问题解的唯一性定理

本文利用变分原理对二阶方程两点边值问题解的唯一性定理,给予了完备性的证明.     

翠馨苑小区地基处理

通过对几种地基处理方案约分析比较，翠馨苑小区最终采纳了以石粉田填为主的地基处理方案。石粉成分以长石和石英为主，是一种化学稳定性好、抗风化能力强、无腐蚀、易夯实的材料。用石粉做垫层进行地基处理，加大了上覆非液化土层厚度，使处理后的地基可不考虑液化影响，强度高、压缩性低、消耗上部附加能力强，就地取材、造价低、施工方便，既满足了设计要求，又经济合理。     

一种优化的网络设备激励响应测试研究

网络设备中潜在的恶意功能构成了对信息安全潜在的重大威胁，检测这些恶意功能是否存在是网络设备测评的主要目的之一．论述了恶意功能的主要危害，分析了它的潜伏和控制途径，在此基础上提出了一种优化触发条件的激励响应检测方法，并对Apache服务器和一种基于ICMP激活的后门程序进行了仿真实验，结果表明所提出的方法是一种有效可行的测试方法．     

大林算法与SMITH预估器的比较及前馈抗扰补偿

本文对大林算法和Smith预估器进行了分析和比较.针对大林算法抗扰性差的问题,提出了前馈补偿方法,并进行了数字仿真.仿真结果验证了理论上的分析与设计.     

描述裂纹愈合过程的内变量

在连续介质热力学框架内，以热力学第二定律为出发点，推导出裂纹愈合耗散不等式，确定了描述裂纹愈合过程的热力学内变量H的定义形式．裂纹愈合过程内变量的提出，不仅可以将裂纹愈合过程模型化，而且还可以建立裂纹愈合过程的演化方程和本构方程，为裂纹愈合过程的定量分析提供可能性．     

在真空与大气环境下钢在近门坎区疲劳裂纹扩展行为

本文研究了不同热处理的2.25Cr-1Mo、SAE4135和改型9Cr-1Mo钢在真空和大气环境下的疲劳裂纹扩展和门坎值△Kth。由于环境不同,导致了疲劳裂纹扩展机制变化和裂纹闭合主导机制的改变。钢的化学成分与显微组织对闭合机制有显著的影响。由于在门坎值△Kth处的得以充分发育裂纹闭合效应,使降△K与升△K的da/dN～△K曲线不重合,这在近门坎区域是正常现象。