Fabrication and magnetic properties of Co nanowire arrays of different crystal structures

It is important to find some developing high-density magnetic recording materials in magnetic recording field with the development of information and technique, in which vertical magnetic recording is a very important way and has received considerable attention[1—3]. The vertical magnetic recording materials require high squareness, suitable coercivity, and small size of storage element[4]. Someone used nanoporous anodic aluminum oxide as templates to fabricate uniform arrays of multi magneti…     

Correlation between geometrical parameters of electrical tree and corresponding partial discharge parameters in XLPE

This paper deals with the experimental study on the correlation between the geometrical parameters of electrical tree and corresponding partial discharge (PD) characteristic parameters in the course of electrical tree aging within cross linked polyethylene (XLPE) insulation. The electrical tree aging tests were performed on specimens removed from a section of 220 kV transmission cable. The PD macroscopic characteristic parameters were found to be significantly dependent on the corresponding geometrical parameters of electrical tree channels in the course of aging of XLPE, and different kind of electrical tree has different characteristics, and there is obvious correlation between the type of electrical tree and the pre-applied power-frequency stress. Beside, using regression analysis, the expression of the relation between them were obtained, and from which it can be seen that there is significant nonlinear correlation between geometrical parameters of electrical tree and corresponding PD characteristic parameters in the course of aging of XLPE. Therefore, the aging degree of XLPE can be effectively evaluated by recognizing the changing regularity of the PD rnacroscopic characteristic parameters.     

Synthesis and crystal structure of tetranuclear zinc benzoate

A tetranuclear zinc benzoate Zr4O(C6H5CO2)6 was synthesized and characterized by X-ray single crystal determination. It crystallizes in cubic, space group Ia-3d. Its crystal cell is very large, α=4.10063(18)nm, V=68.953(5)nm^3 and Z=48. The structure is composed of discrete Zr4O(C6H5CO2)6 molecules. In each molecule, four zinc atoms are held together by a central oxygen atom, which results in the formation of a regular tetrahedron. All benzoate ligands coordinate to zinc atoms in a bidentate bridging mode. Each zinc atom is in a slightly distorted tetrahedral geometry, coordinated by three benzoate oxygen atoms and the central oxygen atom. The intermolecular interactions result in the formation of a three-dimensional supramolecular framework, with non-intersecting parallel channels.     

Constructing three-dimension space graph for outlier detection algorithms in data mining

Outlier detection has very important applied value in data mining literature. Different outlier detection algorithms based on distinct theories have different definitions and mining processes. The three-dimensional space graph for constructing applied algorithms and an improved GridOf algorithm were proposed in terms of analyzing the existing outlier detection algorithms from criterion and theory.     

CFSBC： Clustering in High-Dimensional Space Based on Closed Frequent Item Set

Clustering in high-dimensional space is an important domain in data mining. It is the process of discovering groups in a high-dimensional dataset, in such way, that the similarity between the elements of the same cluster is maximum and between different clusters is minimal. Many clustering algorithms are not applicable to high dimensional space for its sparseness and decline properties. Dimensionality reduction is an effective method to solve this problem. The paper proposes a novel clustering algorithm CFSBC based onclosed frequent hemsets derived from association rule mining. which can get the clustering attributes with high efficiency. The algorithm has several advantages. First, it deals effectively with the problem of dimensionality reduction. Second, it is applicable to different kinds of attributes, Third, it is suitable for very large data sets. Experiment shows that the proposed algorithm is effective and efficient     

Change in the body temperature of healthy term infant over the first 72 hours of life

OBJECTIVE: To determine the range of body temperature in a group of healthy Chinese term neonates over the first 72 hours of life and to assess the influence of body weight, gestational age and route of delivery.METHOD: All 200 consecutive cases of neonates delivered at our hospital from March to August 2001 were included in this retrospective study. Temperatures were measured immediately after delivery, after 30 minutes, 1 hour, 2 hours, 8 hours and 15 hours and on the 2nd and 3rd day. Axillary temperatures ranging from 36.5 degrees C to 37 degrees C were regarded as normal. No cases of maternal fever or systemic infection of the newborns were discovered. All infants were discharged in good general condition. RESULTS: The mean rectal temperature at birth was 37.19 degrees C. The lowest average temperature was reached at 1 hour after delivery (36.54 degrees C) with a significant difference between natural delivery (36.48 degrees C) and section (36.59 degrees C) (P<0.05). Temperature subsequently rose to 36.70 degrees C at 8 hours and 36.78 degrees C at 15 hours (P<0.05). Hypothermia was seen in 51.8% and hypothermia in 42.5% of the patients. On the 3rd day after delivery, 96% of all temperatures were in the normal range. A significant relation was found between hypothermia and both low birth weight (P<0.001) and low gestational age (P<0.05). CONCLUSION: The reference range presently used did not include all physiological temperatures in the first 72 hours of life. Considering other factors, such as birth weight, route of delivery, gestational age and body temperature on the 2nd and 3rd day of life, may help to correctly assess the significance of temperatures beyond the reference range.     

Circle quorum system-based non-stop network service model

Rapid developments in network systems of business service have resulted in more reliance on distributed computing, typified by “subscriber/push” architectures. Unfortunately, frequent and unexpectable network failures were routine, and downtime was not in hours, but in days. High availability has become the most important factor decreasing business risk and improving Quality of Service. Cluster technology has solved the non-stop problem on Local Area Network. However, most technologies including cluster today fail to ensure the non-stop Internet service based on Routers. With good performance on high availability and fault tolerance, quorum systems are very suitable for application to distributed business service networks. In this work, we modeled and developed a non-stop Internet service system based on a new quorum system, circle quorum system, for Boston Mutual Fund Broker, US. With five protocols, it provided highly available data services for clients on Internet.     

The origin of the anomalous superconducting properties of MgB(2)

Magnesium diboride differs from ordinary metallic superconductors in several important ways, including the failure of conventional models to predict accurately its unusually high transition temperature, the effects of isotope substitution on the critical transition temperature, and its anomalous specific heat. A detailed examination of the energy associated with the formation of charge-carrying pairs, referred to as the 'superconducting energy gap', should clarify why MgB(2) is different. Some early experimental studies have indicated that MgB(2) has multiple gaps, but past theoretical studies have not explained from first principles the origin of these gaps and their effects. Here we report an ab initio calculation of the superconducting gaps in MgB(2) and their effects on measurable quantities. An important feature is that the electronic states dominated by orbitals in the boron plane couple strongly to specific phonon modes, making pair formation favourable. This explains the high transition temperature, the anomalous structure in the specific heat, and the existence of multiple gaps in this material. Our analysis suggests comparable or higher transition temperatures may result in layered materials based on B, C and N with partially filled planar orbitals.