L-谷氨酸对L-苯丙氨酸的热力学及晶型转化的影响

采用静态法测定了L-谷氨酸对L-苯丙氨酸热力学的影响,并应用常用的方程进行了拟合。结果表明,L-谷氨酸的加入增大了L-苯丙氨酸在水中的溶解度。考察了L-谷氨酸对L-苯丙氨酸晶型转化过程的影响,L-谷氨酸的加入可抑制其晶型转化。同时,应用Langmuir模型对晶型转化数据进行了拟合,拟合结果良好,可用于相关数据预测。     

基于八叉树优化的MoM-PO/PTD混合算法分析目标电磁散射及辐射问题

在综合利用矩量法(method of moments, MoM)和物理光学(physical optics, PO)方法的过程中, 要精准识别和划分PO位置处于点光源照射情况下的暗区和亮区。传统的识别划分手段的时间复杂度为O(N²), 当面片数量N增多时, 所需的时间呈现出急剧增长的趋势。文中应用八叉树和后向追踪算法, 对PO亮区判断过程进行加速, 可将时间复杂度由N²降为NlgN。由于计算PO区域电流时没有考虑边缘绕射造成的影响, 导致计算误差较大。鉴于此, 本文在计算过程中引入物理绕射理论对混合算法加以改进, 并通过与FEKO中的MoM相比较, 说明了修正后的混合算法能够有效提升计算精度。     

贵州红层地区危岩带变形破坏机制及防治研究

危岩体(崩塌)是贵州红层地区具有典型的代表性的地质灾害。本文以元厚镇危岩带为例,深入分析元厚镇危岩带的破坏特征及形成机制。将红层地区危岩带的变形破坏机制概括为3个阶段,总结贵州红层地区危岩带破坏特点,并提出了有针对性的综合治理措施。     

Variable Selection via Generalized SELO-Penalized Cox Regression Models

The seamless-L_0(SELO) penalty is a smooth function that very closely resembles the L_0 penalty, which has been demonstrated theoretically and practically to be effective in nonconvex penalization for variable selection. In this paper, the authors first generalize the SELO penalty to a class of penalties retaining good features of SELO, and then develop variable selection and parameter estimation in Cox models using the proposed generalized SELO(GSELO) penalized log partial likelihood(PPL) approach. The authors show that the GSELO-PPL procedure possesses the oracle property with a diverging number of predictors under certain mild, interpretable regularity conditions. The entire path of GSELO-PPL estimates can be efficiently computed through a smoothing quasi-Newton(SQN) with continuation algorithm. The authors propose a consistent modified BIC(MBIC) tuning parameter selector for GSELO-PPL, and show that under some regularity conditions, the GSELOPPL-MBIC procedure consistently identifies the true model. Simulation studies and real data analysis are conducted to evaluate the finite sample performance of the proposed method.     

高性能膜分离材料、膜过程强化关键技术及装备的研制与应用

针对影响和制约膜分离技术大规模推广应用的关键材料与技术瓶颈,中国科学院过程工程研究所"生化工程介质与设备"创新团队经过多年自主创新,在高性能分离膜材料、膜过程强化关键技术和高效膜分离装备等方面取得了系列科研成果,部分成果在调味品、水处理、中药等行业实现了产业化应用,创造了显著的经济效益和社会效益,为提高我国膜工业研发与应用水平,缩短我国膜分离行业与国外先进水平之间的差距,促进膜分离技术的大规模工业化应用做出了贡献。     

用于低层建筑地基的不同长度和掺量椰壳纤维加筋吹填海砂强度参数试验研究

针对海南吹填海砂压实困难、地基承载能力较低的问题,通过直剪试验对椰壳纤维加筋吹填海砂的刚度和抗剪强度进行了研究.结果表明:在吹填海砂中掺入椰壳纤维能够有效提升吹填海砂的力学性能和地基承载力;加筋效果随椰壳纤维加筋土所受垂直应力的增大而增大;椰壳纤维长度小于5 cm时,椰壳纤维对吹填海砂的抗剪强度和刚度随椰壳纤维长度的增大而增大,在椰壳纤维长度达到8 cm时,抗剪强度和刚度反而下降;椰壳纤维加筋土的刚度和最大剪应力一直随椰壳纤维掺量的增大而增大,内摩擦角在椰壳纤维掺量小于0.3%时随掺量增大而增大,当掺量超过0.3%后内摩擦角无明显变化.     

The Convergence of Least-Squares Progressive Iterative Approximation for Singular Least-Squares Fitting System

Data fitting is an extensively employed modeling tool in geometric design. With the advent of the big data era, the data sets to be fitted are made larger and larger, leading to more and more leastsquares fitting systems with singular coefficient matrices. LSPIA (least-squares progressive iterative approximation) is an efficient iterative method for the least-squares fitting. However, the convergence of LSPIA for the singular least-squares fitting systems remains as an open problem. In this paper, the authors showed that LSPIA for the singular least-squares fitting systems is convergent. Moreover, in a special case, LSPIA converges to the Moore-Penrose (M-P) pseudo-inverse solution to the leastsquares fitting result of the data set. This property makes LSPIA, an iterative method with clear geometric meanings, robust in geometric modeling applications. In addition, the authors discussed some implementation detail of LSPIA, and presented an example to validate the convergence of LSPIA for the singular least-squares fitting systems.     

基于SIRV病毒传播理论的装备保障网络级联失效分析

针对装备保障网络遭受敌方攻击时所显现出的复杂性现象,对比分析网络级联过程与病毒传播过程的相似性。在已有的负载容量级联故障传递模型基础上,融入了病毒免疫传播的过程,定义保障节点的4种不同状态,构建基于病毒免疫传播理论的装备保障网络级联传递模型,更好地再现了我方保障机构受到敌方实际打击和舆情攻击时的真实状况。通过仿真对比分析表明,在防御资源有限和时间迫切的情况时,优先考虑主动免疫策略,能够取得较好的抵御级联失效的效果,还可以辅助实施目标免疫策略,从而使装备保障网络具有较强的健壮性和较好的恢复能力。     

粉末冶金法制备混杂增强铜基复合材料的增强体竞争析出行为研究

Copper matrix composites reinforced by in situ-formed hybrid titanium boride whiskers (TiB_w) and titanium diboride particles (TiB_2p) were fabricated by powder metallurgy. Microstructural observations showed competitive precipitation behavior between TiB_w and TiB_2p, where the relative contents of the two reinforcements varied with sintering temperature. Based on thermodynamic and kinetic assessments, the precipitation mechanisms of the hybrid reinforcements were discussed, and the formation of both TiB_w and TiB_2p from the local melting zone was thermodynamically favored. The precipitation kinetics were mainly controlled by a solid-state diffusion of B atoms. By forming a compact compound layer, in situ reactions were divided into two stages, where Zener growth and Dybkov growth prevailed, respectively. Accordingly, the competitive precipitation behavior was attributed to the transition of the growth model during the reaction process.     

气膜条件下车厢表面摩擦阻力计算理论研究

针对气膜条件下厢式运输车厢体表面摩擦阻力减小的实验结果,分别提出边界层加厚理论、混合降速理论、边界层加厚-混合降速理论3种理论来研究空气介质中空气膜的减阻机理,建立了气膜条件下厢式运输车厢体表面气流摩擦阻力计算模型,定性对比分析了厢体表面在有气膜和无气膜条件下各自所受到的气流摩擦阻力.结果表明,有气膜时摩擦阻力减小,这一结果与笔者前期的实验研究结果趋于一致,为气膜减阻在厢体表面减阻中的实际应用提供了理论基础.