两电平三相逆变器效率对比分析

碳素生产中排出的沥青烟气严重污染环境,治理技术难度大,成为企业急需解决的难题。采用静电除尘器与热管换热器结合的方式,对某企业焙烧窑烟气净化进行了应用研究。实践结果表明单纯用静电除尘器易使沥青回收斗出现凝固堵塞,改用热管换热器与静电除尘器相结合治理,净化后烟气中的烟尘浓度、苯并（a）芘含量和沥青烟浓度,均达到了国家排放标准的要求。收集的沥青,可回用于生产系统。     

基于K-means聚类的电信企业客户分群决策

数据挖掘应用开发对电信企业的发展有重要意义,其中客户分群可以准确认识客户总体构成,使得服务和营销更具针对性。以常州市电信企业为例,采用K-means聚类分析技术,利用商业数据挖掘自动化软件KXEN给出了一个电信客户分群的解决方案。实践表明,该方案是有效的。     

追求低碳生活的食堂设计——华源轩家具有限公司惠州工业园员工食堂设计

从低碳的角度介绍了华源轩家具有限公司惠州工业园员工食堂设计方案,分析了食堂的布局和交通流线,探讨了厨房的设计依据,使工厂员工食堂设计更合理更符合环保要求,给员工创造良好的生活环境,提高生活质量.探求了工厂员工食堂设计的新思路.     

橡胶水泥土初期受冻试验

研究橡胶水泥土(RCS)在寒冷地区应用的可行性,对初期受冻的RCS进行标准养护,考察受冻后养护龄期、橡胶粉粒径和掺量等因素对抗压强度的影响。结果显示,RCS在相同标养龄期条件下,初期受冻90d后再标养的试块抗压强度略高于正常标准养护方式,而不掺橡胶粉的普通水泥土(CS)两种情况的抗压强度基本相同。普通标准养护90d的试块强度与初期受冻50 d再养护60 d的RCS抗压强度相近。在负温阶段RCS抗压强度增长率大于CS,但后期增长速度比CS稍缓。研究表明RCS的抗冻性能高于CS,适合在寒冷地区应用。     

聚合物硫铝酸盐水泥基材料的黏结性能

利用聚合物胶粉改性硫铝酸盐水泥的净浆和砂浆,通过测试拉伸黏结强度、抗折黏结强度和抗压强度,研究不同掺量聚合物胶粉对水泥基材料界面结合能力的影响。试验结果表明:在净浆中,当胶粉掺量为m(胶粉)∶m(水泥)=0.03时,28 d的拉伸黏结强度最大为3.26MPa;在砂浆中,当胶粉的掺量为m(胶粉)∶m(水泥)=0.009,水灰质量比在0.42时,14 d抗折黏结强度最大为7.0 MPa。     

基于局域网的相邻路口交通灯协调控制系统的设计

为了缓解城市交通拥堵等交通现状,研制了由欧姆龙PLC做下位机控制器,组态王做远程监控软件的双路口协调控制交通灯实验系统。该实验系统具有实时车流量检测、分时段控制、手动控制、无线遥控控制、急车通行功能。监控计算机通过局域网对交通路口进行远程监控。实验证明,该系统稳定性好,功能完备,人机界面友好,可减少堵塞现象和交通事故,具有很好实际应用价值。     

建立新型实践教学体系,提高学生综合素质

从建立新型实践教学体系的背景分析,提出了建立农业生物学实验教学中心新型的实践、综合生产实践3个板块为基本构架的农业生物实践教学体系,并就提高学生综合素质中3个板块的相互联系进行了探讨。     

农业高校实验教学队伍建设探索

从研究型农业高校实验教学队伍建设的重要性出发,针对我国研究型农林高校目前实验教学队伍的现状和问题,提出了加强实验教学队伍建设的具体措施,对同类学校有一定参考价值。     

Effect of Polyvinylpyrrolidone on the Morphologies of Latex Films and Air Permeability of the Latex Finished Fabrics

Low air permeability is a common problem happening to the coating finished and pigment dyed fabrics.To tackle the problem,styrene and butyl acrylate copolymer latex was prepared and used as substitute for the binder.Then,polyvinylpyrrolidone(PVP)was fed into the latex.It was expected that pores could form in the resulting latex film after being rinsed.The morphologies of the latex films were analysized by scanning electric microscope(SEM).It was found that the continuity of the latex films decreased greatly...     

Preparation of Latex Film with Macropores and Their Applications in Pigment Dyeing

Aiming at improving the permeability of the pigment dyed fabrics,two kinds of hydrophilic polymers(polyvinyl pyrrolidone(PVP),and polyethylene glycol(PEG)were fed into the styrene-butyl acrylate(St-BuA)copolymer latex binder respectively to prepare films with macropores.The effects of the post-added polymers on the latex film formation process and film structures were studied and the performance of the dyed fabrics was evaluated.It was found that the drying process could still be divided into three stages even after the addition of PVP and PEG.And the water evaporation rate during the first and last stage remained the same as usual.However,after the addition of PVP,the onset of the second stage was delayed to high volume fraction,and PVP formed into spherical dispersion phase with 300 nm in diameter.It provided a great deal of interface between the latex polymer and the PVP phase,which led to an increase in the water evaporation rate during the second stage.A different case was found after the feeding of PEG.Firstly,the first stage ended at low volume fraction and a decreased evaporation rate was observed in the second stage.Secondly,the PEG dispersion appeared as finger-like structure in the transmission electron microscopy(TEM)images with 9μm in length.After rinsing,pores were found only in the films formerly containing PVP or PEG,and the shapes and the sizes were closely correlated with the initial morphologies of the PVP or PEG domains.However,the shade of color,the abrasion fastness,and the permeability of the dyed fabric were independent of the type of the post-added hydrophilic polymer.