平面锥形光波导模斑转换器的研究

基于三维有限差分束传输法（FD－BPM）对平面光波导器件中的关键元件之一－平面锥形模斑转换器作了深入的研究，对线性和数种非线性侧面边界的模斑转换器进行了数值仿真和对比，分析了平面锥形模斑转换器侧面边界函数对耦合损耗的影响，以及模斑转换器中模场分布随传输距离的变化，确定了不同长度的平面锥形模斑转换器的最佳侧面边界，指出长度在200－1000μm范围内具有余弦边界的平面锥形模斑转换器性能最佳，并且发现，光纤中的出射光进入模斑转换器以后，光波模式会逐渐发生变化，并最终转化为单模。     

Lightning activity on the central Tibetan Plateau and its response to convective available potential energy

Lightning flash activities on the central Tibetan Plateau have been studied by using the satellite-based Lightning Imaging Sensor(LIS)database from January 1998 to July 2002.The lightning activity shows a clear diurnal variation on the central Plateau.The peak lightning activity appears at about 17:00 which is 3 h earlier than that in Jingxhou,Hubei in the same latitude belt nearby,indicating that the lightning activity is a sensitive indicator of solar heating on the Plateau.The lightning discharge is weaker on the Plateau than Jingzhou.Hubei and other low-altitude continental regions because of the lower convective available potential energy(CAPE)on the Plateau.The CAPE on the Plateau is 12 times lower than that in Jingzhou,Hubei,and 20 times lower than that in the sea-level region,such as Guangzhou and Florida.However,the sensitivity of lightning activity to CAPE changes on the Plateau is up to 30 times more sensitive than other prominent low-altitude regions.     

C－isotope composition and significance of the Sinian on the Tarim plate

102 samples of limestones,mudrocks shales and tillites from the Sinian in Kuluketage have been analyzed ,Four formations in the Sinian belong to glacial deposits in which the differences in δ^13C are distinct (-14.7‰- 4.2‰),Distinctly negative δ^13C excursions for three times support the viwe of three glacial deposits in this area suggested by previous authors,except for the durations of them ,δ^13C values are generally positive in the Beiyixi Formation of lower part of the Lower Sinian ,representing probably the rock records of a continental rift related to break-up of the Rodinian supercontinent,There are three times of distinct excursions of δ^13C curve in all strata,The first one is from positive values at the bottom to about -5‰ at the top of the Beiyixi Formation ,The second one,from 0‰-3‰ in the Arletonggou Formation of upper part of the Lower Sinian to -3.4‰---14.4‰ in the Teruiaiken Formation.The third one,from positive values in the Zhamoketi Formation of lower part of the Upper Sinian to negative values in glacial varves at the top of the Hankeerqiaoke Formation.     

A new Euprox from the Late Miocene of Yuanmou,Yunnan Province,China,with interpretation of its paleoenvironment

The Yuanmou Basin of Yunnan Province is a hotspot for the research of early homind evolution and its environmental background.During the implementation of the Program“Research of the Origin and Evolution of Early Man and Its Environmental Baqckground” from 1998 to 2001,a huge quantity of hominoid and mammal fossils were collected.The present report systematically describes an Euprox robustus sp.nov.identified during the recent laboratory work on the collected material.Euprox is a group of earliest cervids with true antlers.The new species is the third one of the genus discovered in China.Judged by its morphologic characteristics,the new species feed on juicy and tender leaves of dicotyledon.It implies that the vegetation of its epoch in the Yuanmou Basin is a kind of southern subtropical evergreen forest and the climate is humid and temperate with evident seasonality.The latter is mostly influenced by the monsoon and secondly by the latitude.     

Inorganic chemical composition and source signature of PM2.5 in Beijing during ACE-Asia period

Aerosol samples for PM2.5 were collected in Beijing for 38 consecutive days from March to April 2001 using an IMPROVE Sampler. Concentrations of 20 elements in PM2.5 were determined using a PIXE method. Results show that the average mineral dust concentration of PM2.5 was 14.6 Ilg/m3 during the observation period. On the sand-dust event days of March 21 and April 10, dust PM2.5 mass concentrations were 62.4 and 54.1 μg/m^3, respectively.These demonstrate that fine particle pollution by dust event in Beijing was very severe. The enrichment factors of S and Cu reached minimums on the dusty days and were high on the non-dusty days. It is considered that enrichment factors of elements in PM2.5, which are associated with human activities, can probably provide an effective method to distinguish local sources from external sources of dust. Factor analysis on the chemical composition in PM2.5 shows that sources of crustal matters, anthropogenic emission, and oil combustion contributed to PM2.5 levels in air in the springtime of 2001 in Beijing.     

Progress in the study of tectophysicochemistry

Tectophysicochemistry is a research area that deals with the interrelations between physical and chemical changes of crustal materials caused by tectonism. A given tectonic force may be resolved into two parts: homogeneous stress and differential stress. Homogeneous stress refers to isotopic pressure, which is superimposed on the original pressure and affects the equilibrium of various chemical reactions. It is also a factor that influences petrogenesis,metallogenesis and metamorphism. Differential stress is commonly produced when external forces act on a given solid body. It may cause deformation of crustal materials and generate various kinds of structural features. Tectophysicochemistry pays special attention to pressure, temperature and other physicochemical conditions produced or induced by tectonism and studies the influences of additional tectonic parameters on various chemical equilibria, so it gradually develops into an independent area of science.     

Intelligent Integrated Control of Underactuated Mechanical Systems with Second-order Nonholonomic Constraints

This paper describes an intelligent integrated control of an acrobot, which is an underactuated mechanical system with second-order nonholonomic constraints. The control combines a model-free fuzzy control, a fuzzy sliding-mode control and a modelbased fuzzy control. The model-free fuzzy controller designed for the upswing ensures that the energy of the acrobot increases with each swing. Then the fuzzy sliding-mode controller is employed to control the movement that the acrobot enters the balance area from the swing-up area. The model-based fuzzy controller, which is based on a Takagi-Sugeno fuzzy model, is used to balance the acrobot. The stability of the fuzzy control system for balance control is guaranteed by a common symmetric positive matrix, which satisfies linear matrix inequalities.     

模糊综合评价法在企业R＆D能力评价中的应用

依据影响企业R＆D能力的诸多不确定因素，运用模糊综合评价法从整体上评价各个影响因素，综合评价企业R＆D能力。     

Automatic evolutionary modeling by the Lattice-Boltzmann method

The Lattice-Boltzmann method is an effective tool for solving fluid mechanics problems, but there isn’t still a good scheme to determinate some parameters in Boltzmann equations. In this paper, a technique using evolutionary algorithm to automatically model Boltzmann equations is introduced. Numerical simulation shows that the designed scheme is fast and efficient. Biography: Chen Ju-hua ( 1963-), male, Associate professor, research direction: Lattice-Boltzmann method, evolutionary algorithm.     

Stress corrosion cracking and its anisotropy of a PZT ferroelectric ceramics

It is known that some types of ceramics, like Al2O3 and ZrO2, undergo stress corrosion cracking (SCC) or static fatigue fracture under static loading, ever in a rela-tively mild environment, such as moist atmosphere or water at room temperature, which leads to a time-dependent fracture[1—4]. For a transmission electron microscopy specimen of YBa2Cu3O7-x ceramics superconductor, SCC induced by residual stress can occur in an atmosphere with low moisture content[5]. For a lead zirconate ti…