平面型无参比电极二氧化硫传感器

制备了一种新型无参比电极由ＮＡＳＩＣＯＮ和ＹＳＺ两种固体电解质及Ｎａ２ＳＯ４辅助电极构成的二氧化硫传感器。实验结果表明,该传感器对二氧化硫产生Ｎｅｒｎｓｔ响应。由于这种传感器采用了平面结构,对比电极和工作电极处于同样气氛中,消除了氧的影响和密封问题,同时有利于传感器的微型化和多元复合。     

铁铝原子在金属间化合物形成中的扩散

采用铁铝扩散偶,研究铁铝原子在化合反应中的扩散和金属间化合物的形成机理,扩散偶在铁铝低共熔反应温度上下进行热处理,结果表明,扩散偶在低于共熔反应温度处理时,在扩散偶铁－铝界面铁的一侧,通过铝原子的扩散,形成了富铝相金属间化合物ＦｅＡｌ２;而在高于共熔反应温度处理时,则在铁－铝界面上,通过铁、铝原子的互扩散形成了金属间化合物Ｆｅ３Ａｌ５,并随时间向两旁生长,两种化合物均为多孔体。研究发现铁、铝原子的     

线阵CCD在折射率测量中的应用

提出利用线阵CCD传感器作为反射光或折射光的光强分布接收装置的折射率测量方法,研究了如何根据光强的空间分布曲线确定布儒斯特角或临界全反射角的定标方案,讨论了测量结果可能达到的精确度。     

隔震技术的工程应用实例

针对建筑物的抗震问题,探讨了建筑物的隔震技术,并从设计,施工等方面介绍了隔震技术在工程中的具体应用。     

Spontaneous transformation of C60Br24 to C60 in solvents

It was found that C₆₀Br₂₄ transforms to C₆₀ spontaneously in some solvents. The intermediate, C₆₀Br₈, can be separated in some cases. When the bromine trap, phenol, was added,p-bromophenol and other brominated product were obtained and identified. The influences of time, the kind of solvent, etc were investigated. Possible mechanism was suggested. Supported by the National Natural Science Foundation of China Liu Ying: born in 1969, Ph. D     

Molecular cloning and nucleotide sequence of classical swine fever virus strain Shimen

According to the previously published CSFV sequences, 18 paris of partially overlapping primers which span the entire genome of CSFV strain Shimen were designed and synthesized. Each cDNA fragment of strain Shimen was amplified by RT-PCR method from the anticoagulant blood of strain Shimen infected pig. The PCR fragments were cloned into pGEM-T vector respectively and sequenced. The results show that we have obtained the nucleotide sequence of strain Shimen. The viral RNA consists of 12 297 nucleotides including noncoding regions of 373 and 227 bases at the 5′ and 3′ end, respectively, and a single large open reading frame spanning 11 697 nucleotides in the middle, which encodes an amino acid sequence of 3 989 residues with a calculated molecular weight of 437.6×10³. The precisely sequencing of 5′ and 3′ termini is undertaking. Supported by the National Pandeng Project Huang Qianhua: born in 1968. Graduate student     

加工蜗轮体半园凸台夹具的设计计算

对蜗轮体零件进行较详知的分析基础上,运用尺寸链原理和六点定位原理对蜗轮体半园凸台夹具作了定位误差分析和定位精度计算,证实了该夹具设计的可靠性与合理性。     

产品中各工件在单台机器上加工时的排序问题

本文考虑的是工件在单台机器上加工随后组装成产品的排序问题．每个产品由一个特殊工件和一个共同工件组成,机器从加工特殊工件转到加工共同工件有一个调整时间,目标是使所有产品完工时间在批可达或工件可达情况下的加权和最小．对两种情况我们都给出了多项式时间算法．     

用于瞳孔序列图像分析的实时轮廓检测和参数提取

本文介绍一种医用图像分析系统．该系统连续获取瞳孔图像,根据对图像序列的某些先验知识自动确定门限．在此基础上进行快速边缘检测,并自动修补缺损的目标轮廓．在判定所得轮廓有效后计算目标面积．若数据无效则自动重新采样．序列图像观测结束后对间隔不均匀的数据进行内插校正．系统所提供的分析结果可用于临床和医学研究     

镦粗工艺理论与技术的进展

提出了普通平板间镦粗圆柱体高径比Ｈ／Ｄ〉１时刚塑性力学模型的拉应力理论和高径比Ｈ／Ｄ〈１的静水应力力学模型的剪应力理论,前者打破了传统工程塑性力学中所阐述的镦粗体内部总处于三向压应力之说,后者圆满地解释了大型饼类锻件中常出现的“夹馅饼”缺陷问题,平板镦粗所理论已被定性物理模拟和定量数值模拟,广义滑移线解,力学分块法和生产解剖试验所证实,在该新理论基础上,进一步提出方柱镦粗的两个新力学模型,锥形板镦