直通型CT试样COD弹塑性换算

基于刚性转动假设和功等效原理,推导了直通型CT试样的裂纹嘴张开位移和加载线张开位移弹塑性换算公式,并采用Cr2Ni2MoV钢对公式进行试验验证.根据弹塑性有限元分析,刚性转动假设得到了很好的验证,刚性转动中心靠近裂尖位置且受材料本构关系的影响甚微,转动半径R仅与裂纹长度和试样宽度之比a/W有关.有限元分析和试验结果表明,直通型CT试样的COD弹塑性换算公式用于塑性功计算具有更好的精度.     

水下爆炸载荷作用下舰用齿轮箱强度极限数值仿真研究

考虑到设备冲击极限载荷作为舰艇抗水下爆炸冲击设计与评估的重要基础,为了获取舰用设备冲击极限载荷特性,建立了某舰用齿轮箱的有限元模型,采用容许应力法分析了该设备的冲击极限载荷特性.结果表明,容许应力法是一种直接、有效获取舰用设备冲击极限载荷的计算方法,舰用齿轮箱的冲击极限载荷与输入载荷的加速度峰值和脉宽相关.     

基于内在特征和能量约束的曲面网格投影算法

为了在生成六面体网格时将源曲面的网格有效投影到目标曲面,文中提出了一种基于内在特征和能量约束的曲面网格投影新算法.首先通过网格参数化方法将源网格和目标基准网格投影到平面上,然后利用网格内在特征表示方法和网格变形能量将平面上的源网格映射到目标基准网格上,并最终投影到目标曲面上获得目标网格.应用实例表明,该算法稳定可靠,可...     

基于相似度分析的蠕虫检测算法

近年来,蠕虫逐渐成为一种主要的网络威胁.文中针对现有蠕虫检测算法误检率高的问题,提出了一种基于相似度分析的蠕虫检测算法.该算法通过分析异常数据序列与蠕虫行为特征之间的相似性,实现对基本累计异常行为特征检测算法的优化;同时,考虑到复杂的网络环境,利用卡尔曼滤波器的预测功能实现对检测阈值的动态调整.仿真结果表明,与基本累计...     

功能化聚丙烯酸酯乳液的表面改性及产物性能

丙烯酸酯单体添加量达到70%时,加入γ-甲基丙烯酰氧基丙基三甲氧基硅烷(KH570)与剩余单体发生共聚制备表面SiOH功能化聚丙烯酸酯乳液(PAES),产物与正硅酯乙酯(TEOS)发生溶胶-凝胶反应,制备PAES/SiO2杂合乳液.透射电镜分析显示,乳胶粒表面被一层无机硅覆盖.傅里叶变换红外光谱结果表明,KH570与丙...     

基于GMM和MRF的自适应阴影检测

运动目标阴影在很大程度上会影响运动目标跟踪、行为识别的正确性和有效性.为此,文中提出了一种基于混合高斯模型和马尔科夫随机场的自适应阴影检测方法.该方法首先对混合高斯模型进行改进,使其可以自适应调整参数学习率以消除浅阴影;然后采用马尔科夫随机场综合邻域的空间依赖性信息进行精确的阴影检测.为了提高基于马尔科夫随机场的阴影检...     

铁矿粉湿容量的概念及其在制粒过程中的应用

适宜的配水量对改善铁矿粉的制粒效果起重要作用。为建立一种简单易行、准确合理的方法,提出了铁矿粉湿容量的概念,即单位质量的矿物在自然堆积的状态下所能保持的最大含水量,并开发出相关测试设备。利用该方法对来自某实际生产过程中的5组混合料进行了测试,得到了每组混合料的湿容量。在实验室规模的设备上进行了5组混合料在不同配水量条件下的制粒实验,并对其透气性进行了检测,得到了每组原料的最佳配水量。对比每组混合料的湿容量和最佳配水量发现：两个参数之间具有很强的正相关性,湿容量大的混合料需要配加更多的水后料层才能达到最佳的制粒效果。还对料层的透气性和粒度分布关系做了讨论。实验发现随着加水量的增多,颗粒制粒后的粒度逐渐增大,料层的透气性先增大后减小。     

江西丰城市汉族8对遗传性状的基因频率

为探究江西汉族部分遗传性状基因频率分布的特征,采用随机抽样方法对江西丰城市372例(男233例,女139例)汉族人群的眦褶、眼睑、鼻梁类型、鼻孔形状、下颌类型、耳垂类型、额头发际、发形8对遗传性状进行了调查.结果显示:眦褶、头发类型性别间差异有统计学意义;眼睑、鼻梁形状性别间差异有统计学意义;鼻孔、下颌、耳垂、发际性别间差异无统计学意义;内眦褶、鼻孔形状民族间差异较大,耳垂、下颌、发际、发形次之,鼻梁类型、眼睑民族间差异较小;与其它13个民族进行聚类分析结果显示,遗传性状的基因频率分布具有一定的地域性.     

Aero-optical wavefront measurement technique based on BOS and its applications

A collimated light beam will be refracted if it propagates through a flow-field with index-of-refraction variations,and its wavefront will be distorted.If we measure the deflection angle of the light beam,the gradient of the wavefront can be obtained using the Malus law,and the wavefront aberration can be computed with a reconstruction algorithm.Two characteristics of background oriented schlieren(BOS) are conducive to wavefront aberration measurement:BOS can be used to measure the deflection angle of a light beam by measuring the displacement field between the reference image and the experiment image.Moreover,in a BOS system of Schlieren mode,only the ray perpendicular to the background image can be captured with a camera.This is helpful to measure wavefront aberrations that occur after a planar wavefront has passed through the flow-field.Based on these characteristics of BOS of Schlieren mode,a new wavefront measurement technique,which is called the BOS-based wavefront technique(BOS-WT),is proposed in this paper.It works by constructing the relationship between the displacement of the background image and the aero-optical wavefront gradient and uses the Southwell wavefront reconstruction algorithm.A BOS-WT system was assembled,and its temporal resolution was found to be 6 ns,and its temporal-correlation resolution reached 0.2 μs.A BOS-WT can measure the time-correlation transient wavefront quantitatively.It is simple and easy to operate.In this paper,we also present a study of the aero-optical performance of supersonic mixing layer based on our BOS-WT transient wavefronts at an interval of 5 μs.The results showed the wavefront was transient and distorted after it had passed through the mixing layer.Through the analysis of the data at the 5 μs interval,the temporal evolution of wavefront can be obtained.     

Development of cryogenically-cooled low noise amplifier for mobile base station receivers

A new circuit model for designing and manufacturing an S-band low noise amplifier(LNA) with the software,Advanced Design System(ADS),is introduced in this paper.The proposed model involves shunted impedance at the grid to achieve a stable LNA without measuring the S-parameters of transistors at low temperatures.The LNA was measured over the operation band of 2.2-2.3 GHz,which has input and output standing wave ratios below 1.2.The noise figure of the manufactured LNA was about 0.2 dB and the gain was above 22 dB,which indicated that our LNA worked well at 77 K.