Concentrations of “elemental carbon” in samples from the Peking Man Site at Zhoukoudian and the possibility of their application in the development of evidence for the use of fire by humans

Elemental carbon?EC) is a C-rich, O-H-S-N-depleted substance that is necessarily produced in the process of combustion. Due to the logn-term use of fire by cave-inhabiting ape-men, considerable amounts of 揺lemen-tal carbon?would be necessarily left behind in the corre-sponding strata inside the cave. The sepaation of EC was effected by the chemical method and the contents of carbon were determined on an element analyser and a self-made measuring system. The concentration of Ec in the hearth,the exhibited ash samples collected from near the hearth un-earthed in the 1930s, and the three samples of accumulated material collected from the tenth bed are 43.74%, 1.77%,3.88%,1.87% and 1.11%,respectively; those of the equivalent samples from the tenth bed outside the cave and samples from the fourth and seventh beds are at least one order of magnitude lower than the former抯. The above re-sults show that the sampling location of the tenth bed may be close to the hearth. Sampling over a wider range may lead to the finding of a location where the concentrations of EC are corresponding to the maximum values of EC in the hearth. The determination and study of EC may provide new evi-dence for the use of fire by Peking Man.     

<Emphasis Type="Italic">In situ</Emphasis> synthesis of TiC reinforced Cu<Subscript>47</Subscript>Ti<Subscript>34</Subscript>Zr<Subscript>11</Subscript>Ni<Subscript>8</Subscript> bulk metallic glass composites

In situ synthesized TiC particles and β-Ti dendrites reinforced Cu47Ti34Zr11Ni8 bulk metallic glass (BMG) composite ingots were prepared by the suction casting method.The ingots with diameters from 1 up to 4mm were successfully obtained. It was shown that introducing TiC micro-sized particles into the amorphous matrix did not disturb the glass forming ability (GFA) of the matrix,while the yield strength and ductility could be well improved.The phase constitution, microstructure and elements distribution in the composites were studied by OM, XRD, SEM and EDS.It was shown that the in situ synthesized TiC particles acting as heterogeneous nucleation sites promoted the precipitation of β-Ti dendrites, resulting in the formation of the TiC particles and β-Ti dendrites co-reinforced BMG composites. The compressive tests were employed to probe the yield strength and ductility of BMG composites.     

Expression of lysine-rich protein gene and analysis of lysine content in transgenic wheat

Expression vector pBPC102, which carries winged bean lysine-rich protein (wblrp) gene and dihydropicolinate synthase (DHDPS) gene, was transferred into hexaploid winter wheat cv. Jinghua No.l, Jing411, You899 and Yangnongl5 explants of immature inflorescence and immature embryos by particle bombardment. More than 100 transgenic plants were obtained under the selection of s-(2-aminoethyl)-L-cysteine (AEC). Confirmed transgenic plants of To and TI generation by PCR and PCR-Southern blotting analyses showed successful integration of wblrp gene into wheat genome. Analysis of transgenic plant lines of T2 by Northern dot-blotting showed good expression of wblrp gene in offspring seed. The content of free lysine in leaves, contents of bound lysine and total proteins in seeds of T2 transgenie wheat lines were determined and analyzed. Among 34 tested transgenic lines, levels of free lysine content in leaves of 9 transgenic lines are 2~3times higher than un-trans-formed wild-type cultivars. Among 17 analyzed transgenic lines, bound lysine content of 4 transgenic lines is more than 10% higher than that of wild-type cultivars. Our research suggests that introducing wblrp gene into wheat is an effective way to improve its nutrition quality.     

Fabrication and magnetic properties of Co nanowire arrays of different crystal structures

It is important to find some developing high-density magnetic recording materials in magnetic recording field with the development of information and technique, in which vertical magnetic recording is a very important way and has received considerable attention[1—3]. The vertical magnetic recording materials require high squareness, suitable coercivity, and small size of storage element[4]. Someone used nanoporous anodic aluminum oxide as templates to fabricate uniform arrays of multi magneti…     

Correlation between geometrical parameters of electrical tree and corresponding partial discharge parameters in XLPE

This paper deals with the experimental study on the correlation between the geometrical parameters of electrical tree and corresponding partial discharge (PD) characteristic parameters in the course of electrical tree aging within cross linked polyethylene (XLPE) insulation. The electrical tree aging tests were performed on specimens removed from a section of 220 kV transmission cable. The PD macroscopic characteristic parameters were found to be significantly dependent on the corresponding geometrical parameters of electrical tree channels in the course of aging of XLPE, and different kind of electrical tree has different characteristics, and there is obvious correlation between the type of electrical tree and the pre-applied power-frequency stress. Beside, using regression analysis, the expression of the relation between them were obtained, and from which it can be seen that there is significant nonlinear correlation between geometrical parameters of electrical tree and corresponding PD characteristic parameters in the course of aging of XLPE. Therefore, the aging degree of XLPE can be effectively evaluated by recognizing the changing regularity of the PD rnacroscopic characteristic parameters.     

Synthesis and crystal structure of tetranuclear zinc benzoate

A tetranuclear zinc benzoate Zr4O(C6H5CO2)6 was synthesized and characterized by X-ray single crystal determination. It crystallizes in cubic, space group Ia-3d. Its crystal cell is very large, α=4.10063(18)nm, V=68.953(5)nm^3 and Z=48. The structure is composed of discrete Zr4O(C6H5CO2)6 molecules. In each molecule, four zinc atoms are held together by a central oxygen atom, which results in the formation of a regular tetrahedron. All benzoate ligands coordinate to zinc atoms in a bidentate bridging mode. Each zinc atom is in a slightly distorted tetrahedral geometry, coordinated by three benzoate oxygen atoms and the central oxygen atom. The intermolecular interactions result in the formation of a three-dimensional supramolecular framework, with non-intersecting parallel channels.     

Constructing three-dimension space graph for outlier detection algorithms in data mining

Outlier detection has very important applied value in data mining literature. Different outlier detection algorithms based on distinct theories have different definitions and mining processes. The three-dimensional space graph for constructing applied algorithms and an improved GridOf algorithm were proposed in terms of analyzing the existing outlier detection algorithms from criterion and theory.     

CFSBC： Clustering in High-Dimensional Space Based on Closed Frequent Item Set

Clustering in high-dimensional space is an important domain in data mining. It is the process of discovering groups in a high-dimensional dataset, in such way, that the similarity between the elements of the same cluster is maximum and between different clusters is minimal. Many clustering algorithms are not applicable to high dimensional space for its sparseness and decline properties. Dimensionality reduction is an effective method to solve this problem. The paper proposes a novel clustering algorithm CFSBC based onclosed frequent hemsets derived from association rule mining. which can get the clustering attributes with high efficiency. The algorithm has several advantages. First, it deals effectively with the problem of dimensionality reduction. Second, it is applicable to different kinds of attributes, Third, it is suitable for very large data sets. Experiment shows that the proposed algorithm is effective and efficient     

Change in the body temperature of healthy term infant over the first 72 hours of life

OBJECTIVE: To determine the range of body temperature in a group of healthy Chinese term neonates over the first 72 hours of life and to assess the influence of body weight, gestational age and route of delivery.METHOD: All 200 consecutive cases of neonates delivered at our hospital from March to August 2001 were included in this retrospective study. Temperatures were measured immediately after delivery, after 30 minutes, 1 hour, 2 hours, 8 hours and 15 hours and on the 2nd and 3rd day. Axillary temperatures ranging from 36.5 degrees C to 37 degrees C were regarded as normal. No cases of maternal fever or systemic infection of the newborns were discovered. All infants were discharged in good general condition. RESULTS: The mean rectal temperature at birth was 37.19 degrees C. The lowest average temperature was reached at 1 hour after delivery (36.54 degrees C) with a significant difference between natural delivery (36.48 degrees C) and section (36.59 degrees C) (P<0.05). Temperature subsequently rose to 36.70 degrees C at 8 hours and 36.78 degrees C at 15 hours (P<0.05). Hypothermia was seen in 51.8% and hypothermia in 42.5% of the patients. On the 3rd day after delivery, 96% of all temperatures were in the normal range. A significant relation was found between hypothermia and both low birth weight (P<0.001) and low gestational age (P<0.05). CONCLUSION: The reference range presently used did not include all physiological temperatures in the first 72 hours of life. Considering other factors, such as birth weight, route of delivery, gestational age and body temperature on the 2nd and 3rd day of life, may help to correctly assess the significance of temperatures beyond the reference range.