基于指数移动平均的无线层析成像算法

为提高无线层析成像（RTI）算法在多径环境下对运动目标的跟踪精度,降低多径效应对信号变化的影响,引入指数移动平均（EMA）作为无线层析成像中衡量信号变化的参量.采用长时EMA作为基准,无需事先测量待测区域的背景信息.进行了室外穿墙和室内多径环境的单运动目标跟踪实验,与SRTI和KRTI比较,结果显示基于指数移动平均的RTI算法跟踪误差小于其他算法,而算法耗时没有明显增加.      

特种车辆涡轮增压器内部流动特性分析

涡轮增压器是特种动力装备的重要动力部件,良好的密封是保证涡轮增压器正常工作的关键因素,而叶轮高速运转引发的压力不均则是泄漏的重要原因.基于流体力学分析方法建立有限元模型,研究了一种离心泵式密封结构的内部流场分析及流动特性,探讨了压气机端泄漏量、内部压力在不同转速和窄隙出口负压等工况下的变化规律,验证了该密封结构的油气密封性能.结果表明,受高速离心效应影响,该密封结构具备良好的防止压气机端漏油效果,高速运转时会产生漏气.研究结果为改进涡流增压器密封结构提供了参考依据.     

Synthesis and luminescence properties of Mn4+-dopant Ca14Zn6Ga10−xAlxO35 solid solution

Mn~(4+)-activated oxide phosphors,owing to their desirable spectral features,eco-friendly and low cost,are emerging as a new class of non-rare-earth red phosphors for warm white LEDs.However,these phosphors possess low photoluminescence quantum efficiency excited by blue chip currently.Herein we report an isostructural solid solution of Ca_(14)Zn_6Ga_(10-x)Al_xO_(35):0.15Mn~(4+)(0≤x≤10)synthesized by a traditional solidstate reaction route.The microstructure and luminescent performance of this red-emitting phosphor are investigated in detail with the aids of X-ray diffraction,diffuse reflection spectra,photoluminescence spectra/decay/QE,and temperature-dependent PL/QE measurements.Blue shift of energy peaks of~4A_2→~4T_1and~4A_2→~4T_2transition is illustrated by the Tanabe–Sugano diagram and the configurational coordinate diagram.The crystal field strength(Dq)and the Racah parameters(B and C)are carefully calculated to estimate the nephelauxetic effectβrespectively.Particularly we achieve external and internal quantum efficiencies as high as26.1%and 40.3%for Ca_(14)Zn_6Ga_6Al_4O_(35):0.15Mn~(4+)excited by 466 nm,the highest one ever reported in Mn~(4+)activated oxide phosphors under the similar condition.     

Influence of minor boron on the microstructures of a second generation Nibased single crystal superalloy

Boron is added into single crystal superalloys as a micro-alloying element to strengthen low angle grain boundaries.However,systematic investigations on the effect of boron on microstructures of single crystal superalloys are limitedly reported.The effect of boron on as-cast and heat-treated microstructures was investigated in two experimental Ni-based single crystal superalloys containing 3 wt% Re.The current results indicated that the volume fraction of(γ+γ′)eutectic and M_3B_2 borides was evidently increased,while the number of micropores was evidently decreased with the addition of 0.02 wt% boron.The(γ+γ′)eutectic could not be dissolved completely due to the lower incipient melting temperature caused by the formation of M_3B_2 borides.Meanwhile,the M_3B_2 borides were found to be enriched with indispensable strengthening elements Cr,Mo,W and Re,and this may lower the strengthening effect and cause stress concentration during high temperature creep.     

Coupling effects of tungsten and molybdenum on microstructure and stressrupture properties of a nickel-base cast superalloy

In order to comprehensively understand the forming mechanism of abnormal phases solidified in a nickel-base cast superalloy with additives of tungsten and molybdenum, the coupling effects of W and Mo on the microstructure and stress-rupture properties were investigated in this paper. The results indicated that the precipitation of primary α-(W, Mo) phase depended tremendously on the amount of W and Mo addition. When the total amount of W and Mo was greater than 5.79 at%, α-(W, Mo) phase became easily precipitated in the alloy.With increasing of Mo/W ratio, the dendrite-like α-(W, Mo) phases were apt to convert into small bars or blockylike phases at the vicinities of γ′/γ eutectic. The morphological changes of α-(W, Mo) phase can be interpreted as the non-equilibrium solidification of W and Mo in the alloy. Since the large sized α-(W, Mo) phase has detrimental effects on stress-rupture properties in as-cast conditions, secondary cracks may mainly initiate at and then propagate along the interfaces of brittle phases and soft matrix. During exposing at 1100 ℃ for 1000 h, the α-(W, Mo) phases transformed gradually into bigger and harder M_6C carbide, which results in decreasing of stress-rupture properties of the alloy. Finally, the alloy with an addition of 14W-1Mo(wt%) maintained the longest stress lives at high temperatures and therefore it revealed the best microstructure stability after 1100 ℃/1000 h thermal exposure.     

基于破岩比能的刀盘滚刀优化布置设计

基于科罗拉多矿业学院(Colorado School of Mines)推导的CSM受力模型,采用刀盘破岩比能最低原则,以径向不平衡力和倾覆力矩最小为目标,使用标准遗传算法(GA),优化中心刀、正刀和边缘滚刀的刀间距,以及正刀和边缘滚刀的极角.以TB880E刀盘为实例计算,结果表明:优化中心刀和正刀区域的刀间距后,比能减少1.53%,优化边缘滚刀区域的刀间倾角后,比能减少了1.10%;优化正刀和边缘滚刀的极角后,径向不平衡力减少到0.1265N,倾覆力矩减少到0.7591N·m,从而减小了刀盘的变形量.该研究可用于刀盘的布刀优化设计和对破岩过程能耗的预测,可降低TBM破岩能耗,改善TBM掘进能力.     

块体金属玻璃微磨削加工的温度场仿真

建立单颗磨粒微磨削的正交切削模型和玻璃金属的本构关系方程,采用有限元工艺仿真系统对块体金属玻璃进行微磨削加工的温度场仿真,从而得到块体金属玻璃在微磨削过程中的温度以及温度变化趋势,进而观察其磨削温度是否达到块体金属玻璃的玻璃转变温度.因此,对玻璃金属磨削加工过程的温度仿真可以有效预测非晶表面是否有晶化现象的发生.改变微磨削加工参数,对块体金属玻璃的各个磨削区的温度变化趋势进行观察.通过仿真实验发现,块体金属玻璃的最高磨削温度发生在磨粒前刀面与磨屑接触的区域,即第二变形区.     

针对政府的微博网络舆情传播规律与对策研究——以新浪微博为例

以新浪微博为例,提出了一种基于扩散树的网络舆情传播模型,并探索微博舆情的传播规律及其对策。依照微博的传播特征及网络舆情生成规律,给出了微博网络舆情扩散树的定义及其构建方法;根据树的数理特征,揭示了基于扩散树的微博网络舆情"孤树"和"森林"传播规律,并进行了实证分析。基于扩散树特征,从舆情信息及时感知、官微澄清事实真相、积极培育微博红客、严厉惩处微博水军、政府官员谨言慎行、事件定性定论慎重六个方面,提出了应对微博网络舆情的策略。     

台球运动中计算主球进攻方向的精确模型及实用方法

在台球比赛中,如何提高目标球的落袋概率是一个最基本的问题.事实上,该问题等价于计算主球的最佳进攻路线问题,为此,给出了三点一线碰撞模型.由该模型衍生出的虚拟球训练法简单易行,同时适用于短距离和长距离进攻,能够快速提升初级台球选手的击球水平.     

基于值域博弈的主动悬架系统H_∞可拓控制

建立7自由度整车主动悬架系统模型,并设计H_∞控制器。在此基础上,选取特征量,划分三种不同的值域,经过关联函数计算,建立其H_∞可拓控制器;在不同方案下以经典域和可拓域为博弈双方构造博弈矩阵,获得值域划分纳什平衡点,采用模糊控制规则动态整定可拓域和经典域边界,优化悬架H_∞可拓控制系统的控制性能。最后利用MATLAB/Simulink软件进行仿真,并对其仿真结果进行比较.仿真结果表明,H_∞可拓控制较H_∞控制能更好地改善主动悬架性能,而通过值域博弈的H_∞可拓控制器进一步提高了悬架系统的控制性能。