Some highlights of a 47 year career in research

No Abstract. .M.D., Ph. D. The John S. Dunn Professor and Chair of Integrative Biology and Pharmacology and Director of the Institute of Medicine at the University of Texas-Houston Health Science CenterReceived 1 October 2004; accepted 21 October 2004     

Generation and annotation of the DNA sequences of human chromosomes 2 and 4

Human chromosome 2 is unique to the human lineage in being the product of a head-to-head fusion of two intermediate-sized ancestral chromosomes. Chromosome 4 has received attention primarily related to the search for the Huntington's disease gene, but also for genes associated with Wolf-Hirschhorn syndrome, polycystic kidney disease and a form of muscular dystrophy. Here we present approximately 237 million base pairs of sequence for chromosome 2, and 186 million base pairs for chromosome 4, representing more than 99.6% of their euchromatic sequences. Our initial analyses have identified 1,346 protein-coding genes and 1,239 pseudogenes on chromosome 2, and 796 protein-coding genes and 778 pseudogenes on chromosome 4. Extensive analyses confirm the underlying construction of the sequence, and expand our understanding of the structure and evolution of mammalian chromosomes, including gene deserts, segmental duplications and highly variant regions.     

Effects of Eriobotrya japonica (Lindl.) flower extracts on mercuric chloride-induced hepatotoxicity in rats

Mercury(II) is an important factor in hepatotoxicity that can enter the body through marine diets and amalgams.In the present study,the protective effect of the Eriobotrya japonica flower extract(EJFE) on HgCl 2-induced hepatotoxicity was investigated.Five mg/kg of mercuric chloride in drinking water was given to rats either with saline or EJFE(100 and 200 mg/kg as intraperitoneal(IP)) for 30 d.The mercury levels in different groups of liver tissues of the rats were measured with flameless atomic absorption spectroscopy(F-AAS).Also,mercury accumulation in the liver of the rats was modeled by using a parallel chemical kinetic model.The results showed that HgCl 2-induced oxidative damage led to a significant decrease in glutathione(GSH) and the total antioxidant capacity(TAC) levels,and to a significant increase in lipid peroxidation level.Accumulated mercury was 14.47% more in the livers of the stress groups than in those of the control groups(P<0.001),whereas the amount of Hg was adjusted to 13.49% and 13.93% in groups treated with 100 and 200 mg/kg of EJFE respectively,as compared with stress groups(P<0.001).HPLC analysis of EJFE revealed that hesperetin and gallic acid are the major antioxidants in EJFE.Results demonstrate that flowers of the Eriobotrya japonica cause a significant protection against HgCl 2 induced hepatotoxicity in all diagnostic parameters by strengthening the antioxidant defense mechanisms and they may have a therapeutic function in free radical mediated diseases.     

Improvement of corrosion performance of 316L stainless steel via PVTMS/henna thin film

Metallic materials are the most used materials as orthopedic or dental implants due to their excellent mechanical properties. However they are not able to create a natural bonding with the mineralized bone and occasionally suffer localized corrosion. This work describes the electrochemical behavior of a hybrid sol–gel thin film with the addition of green inhibitor. These films enhance the ability of the implant to make a union with the existing bone and improve its resistance to aggressive environment. An ethanol solution of the polymerized vinyltrimethoxysilane (PVTMS) was mixed with an aqueous solution of henna extract (Lawsonia inermis) and refluxed to give homogeneous sols. Nanostructure hybrid PVTMS/henna thin films were deposited on the stainless steel 316L by spin-coating. The morphology, composition and adhesion of hybrid sol–gel coatings have been examined by SEM, EDX and pull-off test, respectively. Addition of high additive concentrations (0.1%) did not disorganize the sol–gel network. Direct pull-off test recorded a mean coating-substrate bonding strength larger than 20.6 MPa for the hybrid sol–gel coating. The effect of henna extract, with various added concentrations from 0.012% to 0.1%, on the anticorrosion properties of sol–gel films have been characterized by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization tests in simulated body fluid (SBF) solution and has been compared to the bare metal. Henna extract additions (0.05%) have significantly increased the corrosion protection of the sol–gel thin film to higher than 90%. The in vitro bioactivity of prepared films indicates that hydroxyapatite nuclei can form and grow on the surface of the doped sol–gel thin films. The present study shows that due to their excellent anticorrosion properties, bioactivity and bonding strength to substrate, doped sol–gel thin films are practical hybrid films in biomedical applications.     

Effect of SrCO<Subscript>3</Subscript> addition on the dynamic compressive strength of ZTA

Ceramic parts usually experience dynamic load in armor applications. Therefore, studying the dynamic behaviors of ceramics is important. Limited data are available on the dynamic behaviors of ceramics; thus, it is helpful to predict the dynamic strength of ceramics on the basis of their mechanical properties. In this paper, the addition of SrCO₃ into zirconia-toughened alumina (ZTA) was demonstrated to improve the fracture toughness of ZTA due to the formation of the SrAl₁₂O₁₉ (SA6) phase. The porosity of ZTA was found to be increased by the addition of SrCO₃. These newly formed pores served as the nucleation sites of cracks under dynamic load; these cracks eventually coalesced to form damaged zones in the samples. Although the K IC values of the samples were improved, the dynamic strength was not enhanced because of the increase in porosity; in fact, the dynamic strength of ZTA ceramics decreased with the addition of SrCO₃.     

夹层板系统压缩力学性能试验研究

夹层板系统以其优越的力学性能在工程领域得到广泛应用。对夹层板系统在不同加载速率下的压缩力学性能进行了试验研究。首先对钢-聚氨酯-钢夹层板系统进行了准静态压缩试验,得到夹层板系统的准静态等效应力-应变曲线;并对同一组试样,基于分离式霍普金森压杆试验装置,进行了动态冲击压缩试验。近似等效SHPB试验原理,分析夹层板系统的动态力学性能。比较分析结构的破坏形式和原因,为新型结构的优化设计和应用提供参考。     

Nano-Structured Carbide-Derived Carbon Films and Their Tribology

Carbide-derived carbon （CDC） is a form of carbon produced by reacting metal carbides, such as SiC or TiC, with halogens at temperatures high enough to produce fast kinetics, but too low to permit the rearrangement of the carbon atoms into an equilibrium graphitic structure. The structure of CDC is derivative of the original carbide structure and contains nanoscale porosity and both sp2 and sp3 bonded carbon in a variety of nanoscale structures. CDC can be produced as a thin film on hard carbides to improve their tribological performance. CDC coatings are distinguished by their low friction coefficients and high wear resistance in many important industrial environments and by their resistance to spallation and delamination. The tribology of CDC coatings on SiC surfaces is described in detail.     

赞比亚卢安西亚矿区复杂铜矿孔雀石的机械活化及浸出研究

Mechanical activation(MA) of malachite was carried out by dry planetary grinding(DPG) and wet Isa grinding(WIG) methods. When the rotational speed was increased to 400 r/min in DPG, the specific surface area of malachite reached the maximum and the particle size reached the minimum of 0.7–100 μm. Agglomeration occurred between mineral particles when the rotational speed was increased to 580 r/min in DPG.However, no agglomeration was observed among particles with sizes 0.4–3 μm in WIG. X-ray diffraction analysis showed that, at a 580 r/min rotational speed in DPG, the amorphization degree of malachite was 53.12%, whereas that in WIG was 71.40%, indicating that MA led to amorphization and distortion of crystal structures. In addition, in the Fourier transform infrared(FT-IR) spectra of activated malachite, the bands associated with –OH, CO_3^2-and metal lattice vibrations of Cu–O and Cu–OH were weakened, and a new H–O–H bending mode and peaks of gaseous CO_2 appeared, indicating that MA decreased the band energy, enhanced dihydroxylation, and increased the chemical reactivity of the malachite.Furthermore, the leaching behavior of copper ore was greatly improved by MA.     

Fluctuating stripes at the onset of the pseudogap in the high-T(c) superconductor Bi(2)Sr(2)CaCu(2)O(8+x)

Doped Mott insulators have a strong propensity to form patterns of holes and spins often referred to as stripes. In copper oxides, doping also gives rise to the pseudogap state, which can be transformed into a high-temperature superconducting state with sufficient doping or by reducing the temperature. A long-standing issue has been the interplay between the pseudogap, which is generic to all hole-doped copper oxide superconductors, and stripes, whose static form occurs in only one family of copper oxides over a narrow range of the phase diagram. Here we report observations of the spatial reorganization of electronic states with the onset of the pseudogap state in the high-temperature superconductor Bi(2)Sr(2)CaCu(2)O(8+x), using spectroscopic mapping with a scanning tunnelling microscope. We find that the onset of the pseudogap phase coincides with the appearance of electronic patterns that have the predicted characteristics of fluctuating stripes. As expected, the stripe patterns are strongest when the hole concentration in the CuO(2) planes is close to 1/8 (per copper atom). Although they demonstrate that the fluctuating stripes emerge with the onset of the pseudogap state and occur over a large part of the phase diagram, our experiments indicate that the stripes are a consequence of pseudogap behaviour rather than its cause.     

Hot compression deformation behavior of AISI 321 austenitic stainless steel

The hot compression behavior of AISI 321 austenitic stainless steel was studied at the temperatures of 950–1100℃ and the strain rates of 0.01–1 s?1 using a Baehr DIL-805 deformation dilatometer. The hot deformation equations and the relationship between hot deformation parameters were obtained. It is found that strain rate and deformation temperature significantly influence the flow stress behavior of the steel. The work hardening rate and the peak value of flow stress increase with the decrease of deformation temperature and the increase of strain rate. In addition, the activation energy of deformation (Q) is calculated as 433.343 kJ/mol. The microstructural evolution during deformation indicates that, at the temperature of 950℃ and the strain rate of 0.01 s?1, small circle-like precipitates form along grain boundaries; but at the temperatures above 950℃, the dissolution of such precipitates occurs. Energy-dispersive X-ray analyses indicate that the precipitates are complex carbides of Cr, Fe, Mn, Ni, and Ti.