Study on the Centralization Strategy of the Blood Allocation Among Different Departments within a Hospital

By far, the researches on how to distribute blood products among different departments in hospital have not been further studied, though the problem of blood shortage and wastage that caused by improper blood allocation is severe, which may endanger patient’s lives and impose considerable costs on hospitals. In order to solve this problem, this paper mainly studies on how to distribute the blood items among different departments within a hospital and investigates the allocation approach with the novel management method by centralizing the inventory of several different departments. By integrating the blood inventory requirements of some departments, the hospital could reduce the rate of blood shortage and wastage effectively, release the pressure of the occupancy of resources and reduce the bullwhip effect of blood products. This paper illustrates the centralization principle in hospital and formulates the mixed integer programming model to work out the optimal allocation network scheme and the optimal inventory setting for every department. And the results of the numerical example demonstrate that this centralization method could considerably reduce blood shortage and wastage in hospital by about 72% and 90% respectively. Furthermore, it could decrease the total cost by about 108,540 RMB a month on blood supply chain management in the hospital and improve the effect of some certain surgeries by transfusing the fresh blood to patients.     

Effects of Strain Rate,Temperature and Grain Size on the Mechanical Properties and Microstructure Evolutions of Polycrystalline Nickel Nanowires: A Molecular Dynamics Simulation

Through molecular dynamics(MD)simulation,the dependencies of temperature,grain size and strain rate on the mechanical properties were studied.The simulation results demonstrated that the strain rate from 0.05 to 2 ns~(–1 )affected the Young’s modulus of nickel nanowires slightly,whereas the yield stress increased.The Young’s modulus decreased approximately linearly;however,the yield stress firstly increased and subsequently dropped as the temperature increased.The Young’s modulus and yield stress increased as the mean grain size increased from 2.66 to6.72 nm.Moreover,certain efforts have been made in the microstructure evolution with mechanical properties association under uniaxial tension.Certain phenomena such as the formation of twin structures,which were found in nanowires with larger grain size at higher strain rate and lower temperature,as well as the movement of grain boundaries and dislocation,were detected and discussed in detail.The results demonstrated that the plastic deformation was mainly accommodated by the motion of grain boundaries for smaller grain size.However,for larger grain size,the formations of stacking faults and twins were the main mechanisms of plastic deformation in the polycrystalline nickel nanowire.     

日本大学生就业状况及其启示

目前,在经济增长趋缓的大背景下,如何促进大学生就业成为各国的难题。近年日本为应对大学生就业压力,政府、高校、用人单位等社会各方面都积极行动,显著提高了大学生的就业率。我国大学生就业情况比日本更加严峻,日本实施的一系列就业促进政策对改善我国大学生的就业状况具有一定的启示。我国需要从加强就业政策的事中事后监管、充分发挥行业协会的作用、改善高校就业指导模式、加强高职(专科)院校建设等方面入手,不断提升我国的大学生就业状况。     

基于高斯字典原子稀疏表示的高精度宽角SAR成像方法

为了提高从宽角合成孔径雷达(synthetic aperture radar, SAR)图像中提取目标后向散射各向异性特性的性能,在宽角SAR字典稀疏表示模型的基础上,提出一种基于高斯字典原子的高精度宽角SAR成像方法。在字典构造上,采用不同中心位置、相同方差的高斯函数。在求解稀疏表示系数上,采用广义最小最大凹惩罚稀疏重构算法求解。最后，根据稀疏表示系数的重构结果以及构造的字典得到目标的后向散射各向异性特性。通过仿真实验和Backhoe数据对算法进行验证,结果表明,该方法能够高精度地提取目标的后向散射各向异性特性。     

不同周围流速和电压下的绝缘子积污特性

为了研究绝缘子在不同电压下表现的积污特性，利用流体力学的相关知识和电场理论，建立了模拟风沙的多物理场仿真模型.研究结果表明，周围流动速度较小时，绝缘子两端的电压增大，积污质量发会有一定程度的增加，且积污与电场力的变化密切相关，结合静电场分析会更准确；周围流动速度较大时，即使电压增大，积污质量也不会发生太大的变化.     

盲区下高超声速飞行器贝叶斯指示交接方法

针对探测盲区下的高超声速飞行器接力跟踪问题,提出了基于多假设运动模型的贝叶斯指示交接方法。该方法首先根据目标运动的先验信息,对盲区下模型参数进行多假设建模。然后利用贝叶斯理论以概率的形式表达目标在盲区内的运动状态,通过蒙特卡罗采样近似计算搜索空域中目标的概率分布,从而确定搜索空域和波位顺序。仿真结果表明,该算法在一定盲区范围内,针对不同机动能力的目标均具有较高交接成功概率,其性能显著优于传统算法,能够实现目标的指示交接。     

牛骨粉加工中干燥动力学模型的研究

骨粉的制备是骨资源化利用的有效途径,它是以骨为原料,通过清洗、脱脂、酶解、干燥、超微粉碎等工序制成,其中干燥是骨粉制备过程中较为关键的步骤。本文以含水率、干燥速率为考察指标,研究温度、重量、酶解对牛肋骨骨粉含水率和干燥速率的影响。根据实验结果,运用数理分析方法,比较3种经典的经验、半经验数学模型,拟合骨粉干燥动力学模型,为骨粉的加工工艺和生产设备设计提供技术参数。试验结果表明:骨粉干燥动力学模型符合Page模型。     

Fuzzy Views on Black-Litterman Portfolio Selection Model

In this paper, views of investor are described in fuzzy sets, and two fuzzy Black-Litterman models are constructed with fuzzy views and fuzzy random views respectively. In the models, expected returns and uncertainty matrix of views are redefined and the views are formulated by fuzzy approaches suitably. Then the models are tested with data from Chinese financial markets. Empirical results show that the fuzzy random views model performs the best, and both the fuzzy models are better than the traditional ones, demonstrating that the fuzzy approaches can contain more information in the views and measure the uncertainty more correctly.     

La$_{{1-x}}$Sr$_{x}$TiO$_{3}$ 薄膜的高通量 X 射线衍射

高通量材料合成方法和高通量材料表征手段区别于传统低效率的 "试错法"材料发展方法, 极大地加速了材料科学的变革和发展. 通过设计程序进行了高通量 X 射线衍射实验, 在保证数据分辨率条件下, 高效地表征了 La$_{1-x}$Sr$_{x}$TiO$_{3}$ 薄膜上多个数据位点的晶体结构, 验证了其成分的连续变化性质, 为后续开展更多类型的高通量 X 射线衍射实验提供了指导.