Performance evaluation for selectivity of the flocculant on hematite in selective flocculation

Increased demand for iron ore necessitates the utilization of low-grade iron ore fines, slimes, and existing tailings. Selective flocculation can be an alternative physico-chemical process for utilizing these low-grade fines, slimes, and tailings. In selective flocculation, the most critical objective is the selection of proper reagents that will make floc of desired minerals. In present study, selective flocculation was applied to ultra-fine synthetic mixtures of hematite and kaolinite, and the Fe value was upgraded up to 65.78% with the reduction of Al₂O₃ and SiO₂ values to 2.65% and 3.66%, respectively. Here, degraded wheat starch was used as a flocculant.In this process, separation occurs on the basis of the selectivity of the flocculant. The selectivity of the flocculant can be quantified in terms of separation efficiency. Here, an attempt was also made to develop a correlation between separation efficiency and major operating parameters such as flocculent dose, pH value, and solid concentration to predict the separation performance.     

Microstructure studies of air-plasma-spray-deposited CoNiCrAlY coatings before and after thermal cyclic loading for high-temperature application

In the present study, bond-coats for thermal barrier coatings were deposited via air plasma spraying (APS) techniques onto Inconel 800 and Hastelloy C-276 alloy substrates. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and atomic force microscopy (AFM) were used to investigate the phases and microstructure of the as-sprayed, APS-deposited CoNiCrAlY bond-coatings. The aim of this work was to study the suitability of the bond-coat materials for high temperature applications. Confirmation of nanoscale grains of the γ/γ′-phase was obtained by TEM, high-resolution TEM, and AFM. We concluded that these changes result from the plastic deformation of the bond-coat during the deposition, resulting in CoNiCrAlY bond-coatings with excellent thermal cyclic resistance suitable for use in high-temperature applications. Cyclic oxidative stability was observed to also depend on the underlying metallic alloy substrate.     

中国公路沥青路面水损害气候影响分区方案

为了了解中国气候条件对沥青路面水损害的影响情况,对沥青路面水损害研究成果进行了回顾与分析,认为影响沥青路面水损害的主要气候因素为:降水、高温以及冻融循环过程.降水与高温过程组合以及降水与冻融循环过程组合是影响沥青路面水损害的两个主要气候过程.针对这两个主要气候过程,构建了降水气温指数和降水冰冻指数,用于评价上述气候过程对沥青路面水损害的影响.分析结果表明:利用降水气温指数和降水冰冻指数划分中国公路沥青路面水损害气候影响分区是合理可行的;根据各个气候指数的工程意义和等概率原则,确定了分区界限,拟定了包含14个区的分区方案.     

Biology-inspired synthesis of compound libraries

Biologically active small molecules represent the basis for chemical biology applications in which small molecules are used as chemical tools to probe biological processes. In this report, we review two approaches to design and synthesize compound libraries for biological screenings, i.e., diversity-oriented synthesis (DOS) and biology-oriented synthesis (BIOS). Received 23 October 2007; received after revision 26 November 2007; accepted 28 November 2007     

Impedance and ferroelectric properties of Sr2+ modified PZT-PMN ceramics

Sr^2＋ modified polycrystalline PZT-PMN ceramics were synthesized by a semi-wet route. Impedance spectroscopy studies indicate the bulk and grain boundary effects of PZT-PMN material along with the negative temperature coefficient of resistance. The bulk conductiv-ity exhibits an Arrhenius-type thermally activated hopping process which is supported by the AC conductivity behavior as a function of fre-quency and temperature. It is observed that the remnant polarization increases with an increase in the Sr2＋content in PZT-PMN.     

Plasma devices to guide and collimate a high density of MeV electrons

The development of ultra-intense lasers has facilitated new studies in laboratory astrophysics and high-density nuclear science, including laser fusion. Such research relies on the efficient generation of enormous numbers of high-energy charged particles. For example, laser-matter interactions at petawatt (10(15) W) power levels can create pulses of MeV electrons with current densities as large as 10(12) A cm(-2). However, the divergence of these particle beams usually reduces the current density to a few times 10(6) A cm(-2) at distances of the order of centimetres from the source. The invention of devices that can direct such intense, pulsed energetic beams will revolutionize their applications. Here we report high-conductivity devices consisting of transient plasmas that increase the energy density of MeV electrons generated in laser-matter interactions by more than one order of magnitude. A plasma fibre created on a hollow-cone target guides and collimates electrons in a manner akin to the control of light by an optical fibre and collimator. Such plasma devices hold promise for applications using high energy-density particles and should trigger growth in charged particle optics.     

Transient photoconductivity in a-(Se80Te20)100 xAgx (0rxr4) thin films

Bulk material of (Se80Te20)100 xAgx (0rxr4) system was prepared by using a conventional melt quenching technique. Thin films of a-(Se80Te20)100 xAgx (0rxr4) were deposited by the vacuum evaporation technique at a base pressure of 10 4 mbar onto well-cleaned glass substrates. Temperature dependence of electrical conductivity in the temperature range of 263–333 K has been studied. There is increase in the value of conductivity with increase in temperature as well as with Ag content. The measurements of intensity dependence of photoconductivity show that the photoconductivity increases with intensity as a power law where the power is found to be between 0.5 and 1.0, representing the continuous distribution of traps. Rise and decay of photocurrent with time at room temperature at different light intensities for (Se80Te20)98Ag2 thin film samples have also been reported. The results have been explained on the basis of the Dember voltage and interaction between photoexcited holes and the trapped electrons on the surface.