多扶正器套管串在弯曲井段下套中的摩阻分析

在塞平－１井固井工艺设计中，为提高固井质量，大斜度进段和水平段采用了多扶正器套管串结构．多扶正器套管串在弯曲井眼的下套过程中，一方面由于井眼的空间弯曲，另一方面由于扶正器的存在增加了套管串的刚度，会使套管串在弯曲井段内所受的井壁支持力和摩阻升高，容易发生硬卡和自锁，增加了下会难度．本文针对这一问题，从力学理论出发，研究了多扶正器套管串在弯曲并段下套过程中的摩阻，给出了由于井眼弯曲造成的附加支持力和附加摩阻计算公式，并采用这些公式对塞平－１井１３９６ｍ～１４７６ｍ弯曲并段内扶正器套管串和摩阻进行了理论预测，该预测结果与后来的实测资料较一致．文中还从强度、刚度、固并质量、预防硬卡和自锁等方面综合考虑，对塞平－１井弯曲井段多扶正器套管串结构的适配性进行了理论分析，提出了套管、扶正器选型和合理搭配的建议，为套管器结构设计提供了理论依据．     

Decentralized and overall condition monitoring system for large-scale mobile and complex equipment

It is an urgent project to realize online and overall condition monitoring and timely fault diagnosis for large-scale mobile and complex equipment. Moreover, most of the existing large-scale complex equipment has quite insufficient accessibility of examination, although it still has quite a long service life. The decentralized and overall condition monitoring, as a new concept, is proposed from the point of view of the whole system. A set of complex equipment is divided into several parts in terms of concrete equipment. Every part is processed via one detecting unit, and the main detecting unit is connected with other units. The management work and communications with the remote monitoring center have been taken on by it. Consequently, the difficulty of realizing a condition monitoring system and the complexity of processing information is reduced greatly. Furthermore, excellent maintainability of the condition monitoring system is obtained because of the modularization design. Through an application example, the design and realization of the decentralized and overall condition monitoring system is introduced specifically. Some advanced technologies, such as, micro control unit (MCU), advanced RISC machines (ARM), and control area network (CAN), have been adopted in the system. The system's applicability for the existing large-scale mobile and complex equipment is tested.     

多j组态对排列内禀态

本文采用多j组态对排列模型,考虑包含对力,四极对力,以及四极形变场的系统哈密顿量,通过变分计算,定出了多j组态对排列内禀态,并计算了这些态中的四极矩。最后研究了对力参数给内禀态的影响。结果表明,在对排列内禀态中,耦合成总角动量为0,2,4的核子对占主要成分,表明了在研究变形核时,引进s,d,g玻色子是必要的。     

SOLID-STATE BATTERY WITH POLYACETYLENE ELECTRODE

The Li/LiI/(CHIy)x battery was fabricated by using fast ionic conduclor—LiI as the solid electrolyte has not been reported. The battery exhibited an open circuit voltage of 3.1~v and an initial short circuit of 7ma/cm~2. (CHIy)x can be used in the Li/I_2, battery as the roleof charge transfer complex. Experimental enemy density of 110Wh/kg was obtained based on the weight of (CH)x film (weight of (CH)x electrode: ca. 4mg, doping level:y=0.11).     

各向异性厚板静力分析新方法

本文提出了一种各向异性厚板静力分析新方法。按照此方法,可以建立含有横向坐标Z的任意高次项的高阶方程,而不需增加基本未知函数的个数。与现有厚板理论相比,本文所述方法具有基本未知函数少、基本方程易于建立、且简单易解、计算结果精度较高等优点。     

综合物探在地热勘查中的应用

利用磁法、测氡、直流电测深、激发极化法综合勘查祁县王村地热资源 ,与钻孔资料完全吻合 ,取得了良好的地质效果。     

四辊轧机工作稳定性的探讨

在带钢生产中，后张力大于前张力的情况普遍存在，此时在工作稳定性分析和设计前后张力时，必须满足附加约束条件，否则在分析时就不能按过去的方法去规定θ角、角的正负，并且在轧制过程中，工作辊在空载和轧制时会水平交替窜动，对轧件质量和设备带来不良影响。     

三坐标机测量圆柱蜗杆齿形误差新截形

本文提出在三坐标机上测量普通圆柱蜗杆齿形误差时“新截形”的概念,并与通常意义上的“第一截形”多方面加以比较,指出采用“新截形”测量齿形误差比采用“第一截形”测量具有很大的优越。     

构建卷烟感官香气风格特征的PLSR定量预测模型

采用气相色谱-三重四极杆质谱(GC-MS/MS)方法检测73种烟丝挥发性/半挥发性成分,结合其他12种烟丝/烟气成分检测含量,采用偏最小二乘回归(PLSR)对80种国内市售成品卷烟建立定量预测模型,并利用变量筛选方法优化模型.结果表明:模型对果香评吸指标具有最佳的拟合效果R20.910,其所能解释的方差Q20.850;增加对茴香醛质量浓度和降低乙基麦芽酚的质量浓度可以有效提高果香评吸的感官评价得分;模型对于测试集果香评吸指标也具有很好的预测能力,平均绝对误差MAE=0.111 2(0.500),PLSR预测结果可靠,可作为一种客观预测卷烟感官品质的方法.