Preparation and performance of a cold gas dynamic sprayed high-aluminum bronze coating

By mixing preheated high-aluminum bronze powders with different amounts of Al₂O₃ powder, a low-pressure cold-sprayed coating was prepared and sprayed onto a Cr12MoV steel substrate. The hardness of the coating and the bonding strength between the coating and the substrate were tested with a HV-1000 microhardness tester and a mechanical universal testing machine. The surface microstructure, cross-section and tensile fracture surface of the coating were observed with a scanning electron microscope (SEM). Correspondingly, the influences of the preheat treatment temperature of the bronze powder and the Al₂O₃ content on the coating performance were investigated. The results indicate that the hardness of bronze powders decreased and the coating deposition rate increased after the preheating treatment of the bronze powder. The Al₂O₃ content in the mixed powders contributed to the deformation of bronze powders during the spraying process. This trend resulted in varied performance of the coating.     

基于改进人工势场法的巡航导弹自主避障技术

针对巡航导弹在巡航段的自主避障问题,提出一种改进的人工势场法.为解决传统人工势场法无法避免的局部极小问题,本文将局部极小分为两类,分别给出两类极小值的判定定理及方法,同时给出消除局部极小的措施.考虑导弹的可用过载约束,以连续可微的对数函数构造势场函数,定量描述禁飞区和目标点;此外,为实现自主规避禁飞区,合理设置引力场和斥力场的作用区域和调整势场函数的参数,使导弹在合势场的作用下,获得一条适飞轨迹最终抵达目标点.最后,通过数学仿真,验证了这种方法的有效性.      

以典型产品带动专业课实践教学改革

介绍了金属材料专业课实践教学改革的思路和过程,围绕培养学生工程能力和创新精神,以典型产品带动专业课理论和实践教学,实现实践教学环节和内容的贯通,建立由多个环节有机组成的实践教学体系,通过综合性、工程性、设计性、创造性的实践教学,以科研生产促进实践教学开展,丰富和完善各个实践教学环节并突出能力培养,从而有利于学生提高工程实践能力及创新精神。     

基于滑移/非滑移异质界面的动压润滑性能优化

合理布置的滑移/非滑移异质界面可以提高流体动压润滑性能,但目前滑移区和非滑移区的组合方式大多采用单一的直线拼接法,没有针对流体润滑摩擦副的各类工况设计出相应的优化方案,为此本文建立了一组离散式二次方程来描述滑移区和非滑移区拼接轨迹,并引入计算域单元的宽长比作为优化变量,分别以液膜刚度和摩擦因数作为优化目标,通过MATLAB数值仿真求解不同宽长比条件下滑移区和非滑移区的最优拼接轨迹。结果表明,与直线拼接法相比,选取二次方程所描述的抛物线作为滑移区和非滑移区拼接轨迹的方法使流体润滑摩擦副在摩擦因数和液膜刚度等性能指标上都有所改善,而且根据不同的优化目标参数可以方便地绘制出最优拼接方案,验证了本文方法在改善动压润滑性能上的可行性和普适性。     

Apolipoprotein CIII hyperactivates β cell CaV1 channels through SR-BI/β1 integrin-dependent coactivation of PKA and Src

Apolipoprotein CIII (ApoCIII) not only serves as an inhibitor of triglyceride hydrolysis but also participates in diabetes-related pathological events such as hyperactivation of voltage-gated Ca²⁺ (Ca_V) channels in the pancreatic β cell. However, nothing is known about the molecular mechanisms whereby ApoCIII hyperactivates β cell Ca_V channels. We now demonstrate that ApoCIII increased Ca_V1 channel open probability and density. ApoCIII enhanced whole-cell Ca²⁺ currents and the Ca_V1 channel blocker nimodipine completely abrogated this enhancement. The effect of ApoCIII was not influenced by individual inhibition of PKA, PKC, or Src. However, combined inhibition of PKA, PKC, and Src counteracted the effect of ApoCIII, similar results obtained by coinhibition of PKA and Src. Moreover, knockdown of β1 integrin or scavenger receptor class B type I (SR-BI) prevented ApoCIII from hyperactivating β cell Ca_V channels. These data reveal that ApoCIII hyperactivates β cell Ca_V1 channels through SR-BI/β1 integrin-dependent coactivation of PKA and Src.     

深生浅储天然气封盖保存模式及能力评价——以大庆长垣南部黑帝庙油层为例

通过统计钻井数据得到，大庆长垣南部黑帝庙油层泥岩盖层主要发育于H1^6、H1^5、H1^4小层，其底部分别发育的3套区域分布的泥岩盖层是其天然气的主要封盖层。由盖层厚度与源断裂断距大小比较可以得到，3套区域分布的泥岩盖层多处被错开，形成多处逸散窗口，天然气只能在源断裂之间未被错开的H1^6、H1^5和H1^4三套泥岩盖层之下被保存下来，如果圈闭发育便可以聚集成藏，否则天然气将会继续沿逸散窗口运移散失。通过比较盖层所能封闭住的最大气柱高度与圈闭幅度大小可麟得到，3套区域分布的泥岩盖层所能封闲住的最大气柱高度远大于圈闭构造幅度，可以封盖住进入圈闭中的天然气。通过冒前天然气显示井与盖层之间时空分布关系研究得到，3套区域分布的泥岩盖层空间分布控制着天然气聚集层位和平面上的分布部位，其形成时期与嫩一、二段源岩大量排气期较好地匹配，有利于天然气在黑帝庙油层中聚集成藏。     

水泥稳定沙砾试铺方案探讨

对水泥稳定沙砾试铺筑过程中的人员安排、机械配备、施工工艺及现场试验等内容进行了总结,确定了施工中的施工工艺、松铺系数、碾压遍数等。     

Effects of AlN on the densification and mechanical properties of pressureless-sintered SiC ceramics

In the present work, Si C ceramics was fabricated with Al N using B_4 C and C as sintering aids by a solid-state pressureless-sintered method. The effects of Al N contents on the densification, mechanical properties, phase compositions, and microstructure evolutions of as-obtained Si C ceramics were thoroughly investigated. Al N was found to promote further densification of the Si C ceramics due to its evaporation over 1800 °C,transportation, and solidification in the pores resulted from Si C grain coarsening. The highest relative density of 99.65% was achieved for Si C sample with 15.0 wt% Al N by the pressureless-sintered method at 2130 °C for 1 h in Ar atmosphere. Furthermore, the fracture mechanism for Si C ceramics containing Al N tended to transfer from single transgranular fracture mode to both transgranular fracture and intergranular fracture modes when the sample with 30.0 wt% Al N sintered at 1900 °C for 1 h in Ar. Also, Si C ceramics with 30.0 wt% Al N exhibited the highest fracture toughness of 5.23 MPa m~(1/2) when sintered at 1900 °C.     

NaCl和KCl溶液康普顿散射的影响因素

自康普顿散射提出以来,其理论研究和应用研究一直是国内外的热点。基于NaCl和KCl溶液的康普顿散射,通过一定的近似处理,从理论上分析适合这两种溶液的康普顿散射光子数与溶液浓度之间的关系表达式;然后,通过康普顿散射实验验证康普顿散射的理论和实验研究。为了从更微观的角度来把握NaCl和KCl溶液康普顿散射的机理,笔者立足于密度泛函理论对NaCl与KCl溶液的电子结构作了深入分析,得出结论:除质量密度、散射衰减因子以及溶液的浓度外,电子数密度和电子受到的束缚也对康普顿散射光子数有影响,其中,电子数密度是影响NaCl与KCl溶液康普顿散射光子数的主要因素。     

几种光产酸剂产酸效率的测定

溴酚兰水溶液的紫外吸收会随着体系中含酸的量发生变化,在440 nm吸收峰处一定浓度范围内溴酚兰水溶液的吸光度与溶液中酸浓度成正比,可由此测定酸浓度.用这种方法测定了3种不同类型的光产酸剂在聚乙二醇膜层中在低压汞灯(254 nm)照射下的产酸量.其中三嗪光产酸剂的光照产酸能力最强.