平面交叉口的安全设计

本文对平面交叉口的类型选择,设计时应考虑的因素,设计过程和设计原则等方面进行了较为详细的阐述,旨在说明如何设计交叉口才能最大限度地保证交通安全,提高通行能力.     

关于人体经络的一个试探性观点

在考察针刺穴位治疗作用的基础上，根据现有的实验事实，将人体经络的观念和经改进后的神经-内分泌-免疫系统的观念统一起来，提出人体经络是具有敏感节点和功能连接的神经-内分泌-免疫网络的假说。人体经络的复杂网络不仅是遍及全身的系统，而且可以通过敏感节点及其功能连接对身体起调控作用。     

急倾斜厚煤层掩护支架采煤法机械化问题的探讨

掩护支架采煤法是开采急倾斜厚煤层的有效方法之一,但回采工艺大多使用炮采。为进一步扩大急倾斜厚煤层掩护支架采煤法的适用范固,大幅度地提高技术经济效果,必须实现掩护支架下的采煤机械化。本文在总结分析国内外有关经验、资料的基础上,对掩护支架结构型式的改进和采煤机械化问题进行了初步的探讨,提出了设想方案。     

加强意识形态工作 巩固意识形态安全

在国内外综合因素的影响下,我国主流意识形态的指导地位存在安全隐患,因此加强意识形态工作,确保意识形态安全是摆在我们面前的一项重大而艰巨的任务。     

潮流计算中的数学方法——牛顿—拉夫逊法

本文介绍了一种解非线性代数方程组的数学方法——牛顿-拉夫逊法,并将其应用于电力系统潮流计算中。采用本文方法的计算结果表明该教学方法在电力系统潮流问题中是收敛的;同时计算结果与电力专业软件的计算结果保持了一致,从而验证了结果的正确性。     

Homology Priority Task Scheduling in μC/OS-Ⅱ Real-Time Kernel

μC/OS-Ⅱ is an open source real-time kernel adopting priority preemptive schedule strategy. Aiming at the problem of μC/OS-Ⅱ failing to support homology priority tasks scheduling, an approach for solution is proposed. The basic idea is adding round-robin scheduling strategy in its original scheduler in order to schedule homology priority tasks through time slice roundrobin. Implementation approach is given in detail. Firstly, the Task Control Block （TCB） is extended. And then, a new priority index table is created, in which each index pointer points to a set of homology priority tasks. Eventually, on the basis of reconstructing μC/OS-Ⅱ real-time kernel, task scheduling module is rewritten. Otherwise, schedulability of homology task supported by modified kernel had been analyzed, and deadline formula of created homology tasks is given. By theoretical analysis and experiment verification, the modified kernel can support homology priority tasks scheduling, meanwhile, it also remains preemptive property of original μC/OS-Ⅱ.     

Effects of self evaluation on late ERP components

High-density event-related potentials (ERPs) were measured when participants were required to evaluate oneself, significant others (father and mother) and the most familiar public figures (Lei Feng and Jiang Qing) based on trait adjectives. There were three referential conditions and a non-referential control condition including self-evaluation (SE), significant other-evaluation (SOE), general other-evaluation (GOE), and semantic positivity-evaluation (SPE). The behavioral data showed that RTs to GOE condition were longer than the other three conditions. Scalp ERP analysis revealed that (1) SPE condition elicited a more negative N2 than SE condition, which was associated with inhibition of responses; (2) SE condition elicited a more positive P300 than SPE condition, which was an index of attention to self-relevant stimuli; (3) there was no difference on the amplitude and latency of P300 between SE and SOE conditions, which reflected that the concept of “self” included intimate others (e.g., father and mother) in Chinese culture.     

改善20CrMnTiH淬透性的研究

莱钢特钢厂20CrMnTiH钢材成分波动较大,淬透性带HRC8～10,范围较大,制约了齿轮钢质量的进一步提高.通过研究,发现铸坯中心偏析尤其是碳偏析为主要问题.通过工艺优化采取各项措施,尤其增加电磁搅拌后,中心碳偏析得到明显改善;C控制在0.19%～0.20%的炉次达到了95.6%;淬透性带控制在HRC6内的达到了92.1%;在HRC4内的达到了86.2%;提高了产品质量,满足了用户需求.     

共轭斜量法在某些特征向量上收敛速度的估计

设 Ａ是对称正定矩阵，λ_1是 Ａ 的最大或最小特征值，χ_1是对应的特征向量．｛zk｝是用共轭斜量法求解方程组 Αχ＝ｂ时的近似解序列，ｅi＝Ａ～(_1)b-zi,本文给出了|x_1～Tei|较合理的上界估计式。从而为分析预处理共轭斜量法提供了进一步的理论基础。     

合金铸铁激光处理的探讨——Ⅱ.激光辐照工艺参数的控制

用热传导方程控制激光辐照温度,建立了一种新回归方程以控制激光辐照硬化深度,选用卡尔丹公式列热传导方程及同归方程联立求解,可得到同时满足一定的硬化深度及表面最高温度双重要求的工艺参数,此种方法可作为激光硬化处理工艺参数的控制或预报,对本合金铸铁的激光硬化处理,其表面温度的下限应大于其熔点温度,即以表面产生微熔的快速冷凝处理为宜,并以选取低功率慢扫描为最佳。