An organic junction between the vein and membrane of the dragonfly wing

A dragonfly wing consists of membranes and both longitudinal and cross veins. We observed the microstructure cross-section at several locations in the dragonfly wing using environmental scanning electron microscopy (ESEM). The organic nature of the junction between the vein and the membrane was clearly identifiable. The membrane was divided into two layers, the upper epidermis and the lower epidermis. These layers extend around the sandwich structure vein, and combine with the adjacent membrane at a symmetrical location along the vein. Thus, we defined this as an organic junction between the vein and the membranes. The organic junction is able to form a tight corrugation angle, which dramatically increases both the warping rigidity and the strength of the wing, but not the torsional rigidity. The torsional deformation is primarily controlled by the microstructure of the longitudinal veins, and is based on the relative rotation angle between the epidermal layer and the inner layer of the vein that forms the zigzag section.     

Preparation of three-dimensionally ordered macroporous perovskite materials

In this paper,we use La0.8Sr0.2MnO3 and La0.7Ca0.2Sr0.1MnO3 as examples to demonstrate a preparation method for threedimensionally ordered macroporous(3DOM) perovskite thermochromic materials.Polystyrene spheres with an average diameter of 220 nm were self-assembled into a three-dimensionally ordered colloidal crystal template.A mixed metal nitrate solution prepared using La(NO3) 3·6H2O,Ca(NO3) 2·4H2O,Sr(NO3) 2,Mn(CH3COO) 2·4H2O and an ethanol precursor was used to fill the interstitial voids of the polystyrene colloidal crystal templates.3DOM La0.8Sr0.2MnO3 and La0.7Ca0.2Sr0.1MnO3 materials were then obtained after the sphere templates were removed via drying and calcination.The results show that the framework of the 3DOM materials can have different thicknesses and pore shrinkage rates by varying the filling times.In addition,the Curie temperatures of the 3DOM and bulk La0.8Sr0.2MnO3 materials can be varied by altering the preparation method.     

Aero-optical wavefront measurement technique based on BOS and its applications

A collimated light beam will be refracted if it propagates through a flow-field with index-of-refraction variations,and its wavefront will be distorted.If we measure the deflection angle of the light beam,the gradient of the wavefront can be obtained using the Malus law,and the wavefront aberration can be computed with a reconstruction algorithm.Two characteristics of background oriented schlieren(BOS) are conducive to wavefront aberration measurement:BOS can be used to measure the deflection angle of a light beam by measuring the displacement field between the reference image and the experiment image.Moreover,in a BOS system of Schlieren mode,only the ray perpendicular to the background image can be captured with a camera.This is helpful to measure wavefront aberrations that occur after a planar wavefront has passed through the flow-field.Based on these characteristics of BOS of Schlieren mode,a new wavefront measurement technique,which is called the BOS-based wavefront technique(BOS-WT),is proposed in this paper.It works by constructing the relationship between the displacement of the background image and the aero-optical wavefront gradient and uses the Southwell wavefront reconstruction algorithm.A BOS-WT system was assembled,and its temporal resolution was found to be 6 ns,and its temporal-correlation resolution reached 0.2 μs.A BOS-WT can measure the time-correlation transient wavefront quantitatively.It is simple and easy to operate.In this paper,we also present a study of the aero-optical performance of supersonic mixing layer based on our BOS-WT transient wavefronts at an interval of 5 μs.The results showed the wavefront was transient and distorted after it had passed through the mixing layer.Through the analysis of the data at the 5 μs interval,the temporal evolution of wavefront can be obtained.     

Plant grafting and its application in biological research

Grafting is widely used for various aspects of plant biological research. We reviewed grafting methods and graft development processes for herbaceous plants. We introduced also methods of investigating the development of graft union and compatibility, and the application of grafting in understanding translocation of substances and long-distance signaling in plants.     

A new process and framework for direct anonymous attestation based on symmetric bilinear maps

For the problem of the original direct anonymous attestation (DAA) scheme’s complexity and great time consumption, a new DAA scheme based on symmetric bilinear pairings is presented, which gives a practical solution to ECC-based TPM in protecting the privacy of the TPM. The scheme still includes five procedures or algorithms: Setup, Join, Sign, Verify and Rogue tagging, but gets rid of zero-knowledge proof and takes on a new process and framework, of which the main operations are addition, scalar multiplication and bilinear maps on supersingular elliptic curve systems. Moreover, the scheme adequately utilizes the properties of bilinear maps as well as the signature and verification of the ecliptic curve system itself. Compared with other schemes, the new DAA scheme not only satisfies the same properties, and shows better simplicity and high efficiency. This paper gives not only a detailed security proof of the proposed scheme, but also a careful performance analysis by comparing with the existing DAA schemes.     

Membrane sorption property effects on transmembrane permeation

A theoretical study was carried out into membrane transport phenomena.Formulae for calculating the membrane transport resistance and transmembrane mass flux were given,variations in membrane resistance and moisture flux with the membrane sorption constant(C)under various humidity conditions were analyzed,and the value of C corresponding to the minimum membrane resistance or the maximum moisture flux was obtained.The results show that the membrane resistance and moisture flux relate not only to C but also to the relative humidities on both sides of the membrane.As C increases,membrane resistance initially decreases but then increases,i.e.,a minimum occurs,while the moisture flux first decreases and then increases,i.e.,a maximum occurs.The membrane resistance and moisture flux reach their extrema at the same value of C,which is determined by the relative humidities on both sides of the membrane.To reduce the membrane resistance,the value of C should be chosen based on the humidity conditions.     

Premixed jet flame characteristics of syngas using OH planar laser induced fluorescence

Lean premixed flame characteristics of several typical low calorific value (LCV) syngases (basis CO/H2/CH4/CO2/N2),including bituminous coal,wood residue,corn core,and wheat straw gasification syngas,were investigated using OH planar laser induced fluorescence (PLIF) technology.OH radical distributions within the turbulent flame were measured for different turbulence intensities.Flame structures of syngases were analyzed and characterized with respect to burnt and unburnt regions,flame curvature (sharp cusp),local extinction (holes and penetration),OH reaction layer thickness,wrinkling,and other features,with OH-PLIF instantaneous images and statistical analysis.Results show that H2 content,LCV,and turbulence intensity are the most effective factors influencing the OH radical intensity and thickness of OH radical layers.The bituminous coal gasification syngas with relatively higher LCV and H2 content tends to burn out easily.Through changes in thickness of the OH radical layers and signal intensities,the reaction layer can be compressed by intensifying turbulence and thereby the combustion processes of syngas.     

Phase field simulation of interatomic potentials for double phase competition during early stage precipitation

Phase field model was employed to study the variations of interatomic potentials of Ni 3 Al (L1 2 phase) and Ni 3 V (DO 22 phase) as a function of temperature and concentration. The long-range order (LRO) parameter related interatomic potentials equations formulated by Khachaturyan were utilized to establish the inversion equations for L1 2 and DO 22 phases, with which interatomic potentials could be calculated. The interatomic potentials of Ni-Al and Ni-V exhibited approximately linear increases and decreases, individually, with enhanced Al concentration. Substituting the inverted interatomic potentials into the microscopic phase field equations led to three cases of precipitation sequence: the DO 22 phase preceded L1 2 phase precipitating at the interatomic potentials of Ni-V > Ni-Al; the vice cases; and two phases precipitated simultaneously at interatomic potentials of Ni-V and Ni-Al were equal.